View Full Version : HELP ID'ing HOSE CLAMP!!! (not gates power grip)
64pontiac
01-11-2010, 10:33 PM
Ok.... so take a look at Mark's Jackass intake tube ( 4 inch diameter I believe) and help me find out what kind of clamps he used?!?!?! They are super clean black clamps, and unless the joint/bolt etc is hidden underneath, they look completely smooth......
the gates clamps are wider and dont go that big... soI have no clue. BDL inustries has a nice clamp but they have visible fasteners and hinge points...
any thoughts?
Vegas69
01-11-2010, 10:53 PM
:ttiwop:
GregWeld
01-11-2010, 11:34 PM
It's a lot easier just to ask him yourself... I'm sure he'd know what they are.
You can PM people... do you know how this is done?
deuce_454
01-12-2010, 12:35 AM
are you talking about "Gates PowerGrip®" Hose Clamps ?
http://www.gatesracing.com/images/hose3mid.jpg
from 1/2 to 3-5/8 diameters... (no 4 inch though)
http://www.jegs.com/p/Gates/Gates-Power-Grip-Clamps/943359/10002/-1
Bow Tie 67
01-12-2010, 07:53 AM
He used hose clamps with black heat shrink.
Northeast Rod Run
01-12-2010, 12:10 PM
He used hose clamps with black heat shrink.
I use heat shrink on some things. it's super cheap (but doesn't look it) and it cleans up things a little bit. an ISCA judge told me about that trick before
64pontiac
01-12-2010, 10:31 PM
I havesent Mark some PMs, but i know he's busy and didn't want to bug him.... I can post a pic from his threads, I just figured someone might know the car....
I specifically said I didnt think they were the gates ones, as gates only lists up to 3 1/4 inch and the throttle body on the LS9 is 4 inches diameter.
Hence the fact I thought they were not Gates shrink clamps..... I have a 4 inch throttle body too..so I wanted to find out!
64pontiac
01-12-2010, 10:32 PM
10-4 on the hose clamps with black heat shrink..... thanks
WSSix
01-14-2010, 08:56 AM
alright so I took a look and couldn't find a picture that shows the area well enough. Anyone care to help me out and link or post it? This sounds like a neat trick.
vBulletin® v3.8.11, Copyright ©2000-2024, vBulletin Solutions Inc.