fuel system for lsx

[LowchevyII]

Im building a lq4 with the l92 heads and the fast 92mm intake (non drive by wire). Im going from a carbed small block to this and would like to knwo what i am going to need. Ideally i would like to change the entire system: tank, pump, filter, pre filter, lines, etc.

What do you guys recommend as my best options?
I would like to maybe go with an aluminum cell (http://www.summitracing.com/parts/SUM-291220-SD/?image=large) because i am gonna be mini tubbing but cannot afford to spend over a grand and a narrowed stainless tank if i can avoid it i would like to.

Comments suggestions and pictures are greatly appreciated

thanks in advance,
Jeff

[reckn8]

I think that you should start by reading here...

http://www.lateral-g.net/forums/showthread.php4?t=23304

[70rs]

Ricks is having a really good sale right now on tanks. They just posted in the Sponsor News section. Take a look, maybe that stainless tank is within reach now? The motor plan sounds great. You should end up with a stout and reliable motor.:cheers:

[LowchevyII]

yeah, im hoping for something cheap reliable but with some grunt that can keep up. i cant wait to get all this planned out and just start chipping away at what needs to be done :cheers:

[1badchevelle]

Maybe this will help.

on the fuel pump most use the walbo gsl-392 but for a bit more a good upgrade is the bosch 044 or(#0 580 254 044)

let me know if you need more info.


http://i406.photobucket.com/albums/pp149/1bad71chevelle/LS1FUELSYS.jpg

[70rs]

Frank also just posted a sale on Ricks tanks. LOTS of free upgrades and other things included. Just over a grand gets you the best available. Great savings right now.

[sharonk868]

Im building a lq4 with the l92 heads and the fast 92mm intake (non drive by wire). Im going from a carbed small block to this and would like to knwo what i am going to need. Ideally i would like to change the entire system: tank, pump, filter, pre filter, lines, etc.

What do you guys recommend as my best options?
I would like to maybe go with an aluminum cell (http://www.summitracing.com/parts/SUM-291220-SD/?image=large) because i am gonna be mini tubbing but cannot afford to spend over a grand and a narrowed stainless tank if i can avoid it i would like to.

Comments suggestions and pictures are greatly appreciated

thanks in advance,
Jeff

Thanks you for the post.
Hi guys, Im a newbie. Nice to join this forum.

[Mkelcy]

Maybe this will help.

on the fuel pump most use the walbo gsl-392 but for a bit more a good upgrade is the bosch 044 or(#0 580 254 044)

let me know if you need more info.


http://i406.photobucket.com/albums/pp149/1bad71chevelle/LS1FUELSYS.jpg

Do you have a bigger version of that diagram (the part numbers are a little hard to read)?

[1badchevelle]

Do you have a bigger version of that diagram (the part numbers are a little hard to read)?

I Pm you email and I will send you one. I will also try to repost a larger file.