PDA

View Full Version : Welcome aboard, Fletcher's Customs


XcYZ
11-10-2009, 08:02 PM
Fletcher's Customs is our newest Supporting Vendor, welcome aboard!




Fletcher’s Customs (http://www.fletcherscustoms.com/)

http://www.lateral-g.org/_banners/fletchers_400.jpg (http://www.fletcherscustoms.com/)

Fletcher’s Customs is southeast’s newest premiere custom and restoration shop! Specializing in modern muscle cars, pro-touring restoration and customizing of 50s through 70s American Muscle cars, modern dropped sport trucks, 4X4’s, motorcycles and ATVs!

Fletcher’s Customs is family owned and operated, specializing in a number of restorative options for cars of any kind from any era. If you've been looking for a restoration shop or just a restyle of your current ride, look no further!

Fletcher’s Customs can do anything from a simple scuff-n-shoot, to custom one of a kind chassis fabrication, to a full blown SEMA build… the quality of craftsmanship and network of aftermarket suppliers used to breathe new life into your daily driver, restomod, or SEMA-quality ride are second to none at Fletcher’s Customs.

While our main focus is in modern pro-touring muscle cars, we also dabble in custom motorcycles and race bikes as time allows. One specialty that we pride ourselves on is one off chassis fabrication and one of a kind Air Ride suspensions, using the best aftermarket and custom fabricated parts available.

There is no project too big or too small. From a repaint, to a full custom chassis and suspension; from a restomod, to a SEMA-quality show ride… Fletcher’s Customs is your team for the job!


Integrity First, Service before Self, and Excellence in All We Do!


http://www.lateral-g.org/temp/FL/FL01.jpg

http://www.lateral-g.org/temp/FL/FL02.jpg

http://www.lateral-g.org/temp/FL/FL03.jpg

http://www.lateral-g.org/temp/FL/FL04.jpg

camcojb
11-10-2009, 08:23 PM
welcome Chad and company................. :cheers:

Jody

Flash68
11-11-2009, 02:49 AM
Very nice work!

fletcherscustoms
11-11-2009, 05:23 AM
Figured it was time to step up and start supporting the community that supported us so much through Ty Ingle's "Freedom Bird" project. This is a great place, which I have been a member of for many years. I look forward to serving you guys a lot more, and offering some killer buys on some awesome parts in the future. Already doing a killer deal on Accmats.com carpet kits right now!

bigtyme1
11-11-2009, 05:52 PM
It was great to meet you at Sema Chad. Welcome aboard:cheers:

tony byram
11-11-2009, 06:40 PM
Just wanted to say a big THANKS! For sharing the photos that you took of the Freedom Bird build. That is one GREAT looking car! You guys knocked yourselves out on that build and it shows, the quality and craftsmanship really makes this car stand out. Congratulations! :hail: :thumbsup:

tony byram
11-11-2009, 06:44 PM
P.S. Gawd I love that GM Jetstream Blue! :thumbsup:

brans72
11-12-2009, 11:16 AM
Great you guy's are on board now. I read about your story a while back in PHR and was wondering when you where going to come out more. Great work so far from what I have seen in pictures! :thumbsup: Brandon

fesler
11-12-2009, 01:22 PM
Congrats on all that went with SEMA, the car looked great and was a big hit. Keep the pics coming. You have been up here for some time so nice to see you up here with your company now. Good luck

fletcherscustoms
11-12-2009, 02:01 PM
Thanks guys. I'm looking forward wo doing a little more work, than the occasional car!! With having a couple of full time guys now, I figure its as good a time as any to expand and start offering my services abroad!!

As I said we do just about anything at Fletcher's. I love fabrication work and have done some out there stuff in the past.

Here's some more builds

How about a full tube chassis, bumper to bumper on 03 Ford F-150
http://www.fletcherscustoms.com/coppermine/albums/ftp_upload/F-150/2007-09-26/DSC01460.JPG
http://www.fletcherscustoms.com/coppermine/albums/ftp_upload/F-150/done/done3.jpg

Bumper to bumper tube chassis on 99 tahoe, with suicide doors, and tons of sheetmetal work
http://www.fletcherscustoms.com/coppermine/albums/ftp_upload/99%20Tahoe/EBAY/driver.JPG
http://www.fletcherscustoms.com/coppermine/albums/ftp_upload/99%20Tahoe/2004_08_16/jamb.JPG
http://www.fletcherscustoms.com/coppermine/albums/ftp_upload/99%20Tahoe/2004_08_11/reartubs.JPG
http://www.fletcherscustoms.com/coppermine/albums/ftp_upload/99%20Tahoe/EBAY/rearinterior.JPG

AutoRad
11-14-2009, 05:58 AM
Chad
It was great to see you & your guys & Ty at SEMA!!! The car is awsome. Great to hear that you are expanding. Looking forward to doing more business with you.
AutoRad

Theresa
11-14-2009, 07:01 AM
"Welcome" is odd since we've known you for so many years, so I guess I'll just say "thanks for supporting Lateral-g". Thanks, Chad. :thumbsup:

BMR Sales
11-15-2009, 06:02 PM
Welcome aboard, Chad!! We wish you much success and hope that your next project turns out as great as Freedom Bird!!

Ringbrothers
11-16-2009, 06:49 AM
Welcome! Glad to have you here! This site has become the best part of my "job"! There are amazing people in this world and a large percentage of them are on this site!
Ty's car turned out amazing! Thank you for all of the email updates on it!
Staci

NOT A TA
11-18-2009, 06:33 AM
Thanks for supporting the site Chad! Good luck with the expansion!