17" KINESIS K27 wheels 5x120.65 carmaro vette

[Thatcher]

http://img.photobucket.com/albums/v335/ThirteenthCurve/IMG_3762.jpg

Kinesis Motorsport 17" wheel set in VERY good condition. These wheels were origionally ordered for a Camaro in 17x9 et52 all around. I had the rears widened to be 17x10" et38, so they are currently 17x9 et52 fronts and 17x10 et38 rears but can be changed to be wider or nattower, fronts and/or rears.

These wheels have only been used for a few thousand miles. The centers have the origional anodized grey Kinesis finish. The outer lips are polished. Everything looks brand new.

I am willing to change the fitment / widths of these wheels for an additional $150 per wheel. Basically, say you want the rears back to 17x9 et52, I can do that by adding 1.5" outer lips to the rears to make them narrower, for $150 per wheel.

Email me for inquiries and/or more pictures. I have detailed pictures of each wheel.

[email protected]

$1790 + shipping via fedex ground anywhere in the continental US for $119, or local pickup in Seattle.

[Cread01]

sorry for my ignorance but what is backspace? i see the et but not sure about it.

[DEIGuy38]

Hopefully this will explain it

http://www.earlywheel.com/graphics/choosingdiagram.jpg

[skatinjay27]

sorry for my ignorance but what is backspace? i see the et but not sure about it.
very high offsets(new vettes and 4the gen offsets)
fronts are a hair over 7"
and rears are 7"
http://www.lateral-g.net/forums/showthread.php4?t=22391&highlight=chart
killer looking wheels though and a pretty good price too.

[Mr.VENGEANCE]

Ah, Thatcher.. youve found your way on here.

good luck on the sales!

Amir aka.
Dark Demon 8V

[Thatcher]

Hey Amir! Yup I found my way on here :)

[Bow Tie 67]

Do you know the weight of these wheels? Thanks

[Thatcher]

k27's weigh in at around 19 lbs.

[rogue]

What year Camaro. Will those rears fit a 69 without minitubbing? Very interested.

[Thatcher]

I have no idea, i'm not a Camaro guy in the least bit. Amir, do you know the answer to this?

[Mr.VENGEANCE]

no they are too aggressive..

for a stock 69 your best bet is a 5 inch rear and an 4.5 in front..

7 inches of backspacing is too high..

[dhutton]

What year Camaro. Will those rears fit a 69 without minitubbing? Very interested.

I have 18x10 with a 6" backspace on the rear of my 69 Firebird and it is a tight fit.

I think you could only use those 9" fronts with an aftermarket subframe.

Don

[Thatcher]

Thanks Amir and Don for your input.
Keep in mind, I can change the 10" rears back to 9's if necessary, but doing narrower outer lips or narrower inner barrels. Not sure if that would make a difference on helping with fitment on that guy's car or not.

[Thatcher]

still available

[skatinjay27]

you should try ls1tech.com

those wheels will fit 4th gen camaros and firebirds good and wont need any adapters like the earlier ones will need.

[Thatcher]

Thank you for the tip. I just registered for LS1Tech and tried to post them up for sale but it says I have insufficient privilages. :(

[skatinjay27]

Thank you for the tip. I just registered for LS1Tech and tried to post them up for sale but it says I have insufficient privilages. :(o yeah i forgot they have a 60 post min. to make posts in the for sale section.

I got ya!
http://www.ls1tech.com/forums/lsx-parts-sale/1195398-17-kinesis-k27-wheels-5x120-65-carmaro-vette.html#post12401964

[Roblee67]

Can you change the backspacing??

[Thatcher]

o yeah i forgot they have a 60 post min. to make posts in the for sale section.

I got ya!
http://www.ls1tech.com/forums/lsx-parts-sale/1195398-17-kinesis-k27-wheels-5x120-65-carmaro-vette.html#post12401964
hey thanks, i really appreciate that!
Can you change the backspacing??
Yes - the backspacing can be lowered by adding a spacer or adding a wider outer lip, or it can be raised by adding a wider inner barrel or adding a narrower outer lip.

[zbugger]

Damn... I wish I had the money for these. They'd be perfect for the '00 Z28 I just got. Best of luck with the sale.

[Thatcher]

Thanks!
Still for sale :)