Speedtech subframe and motor question

[camaro2nv]

I was trying to drop my motor in today for mock up and I ran into a problem. Seems like my mounts are just too far away from the motor. The pan wont clear the rack. Any ideas?
http://img.photobucket.com/albums/v19/tiller2nv/DSC_0671.jpg
http://img.photobucket.com/albums/v19/tiller2nv/DSC_0673.jpg

[Vegas69]

Is that pan supposed to clear a rear steer rack?

[camaro2nv]

I thought so but I could be wrong. If not what pan does? Its shallower then the autokraft.

[camaro2nv]

Heres a post I found from blake,
the motor sits as low as possible the oil pan (ATS or Autokraft) is about 3/8 above the rack and it is off set to the passanger side 3/4" to clear the powersteering fitting on the rack. you should have no issues fitting the transmssion

[Vegas69]

I'm not to up on the LSX stuff. I'm sure Blake can help you. Those motor mounts don't look like the tall style. How much more do you need? Is it hitting the sump or the belly of the pan?

[camaro2nv]

Belly of the pan, Odd part is its looks like Im missing about three inches still.

[awr68]

I'm sure Blake will have answers in the morning........But I will say that it looks like you may have the wrong motor mounts.

[awr68]

Maybe send 68/Camaro (the owner of Evade) a PM...he is using a ST frame w/ Autokraft plates and pan....he may see something wrong?

[camaro2nv]

Thanks guys. Man I love that Evade project. Looking at his thread it looks like I might have the motor mounts backwards. It odd though they engraved facing the right way. Either way Im sure Blake with have a answer tomorrow:thumbsup:

[Blake Foster]

There are 2 different frame pads one set for SBC/BBC and one set for ls motors. Since you purchased the sub off the internet we have no idea what frame pads you have. if you had called us we could have figured it out. Also you will have to remove the rack from the bracket (leave the bracket on the subframe) to get the pan over it when trying to install the motor trans at the same time with the sub on the car. next time i would install the motor trans in the sub then the sub in the car once everything is painted that way no scratches. make sure to square up the sub to the body as well.

Feel free to call us we have a toll free number. we are the ones who know the answers. i am sure most on here do not.

The LS pads have a "D" and a "P" punched in them, if you can not see the marks then measure your frame pads on the top side of the pad from the sub to the center line of the mounting tube, if they are the same then you need the LS pads if they are different then the short one goes on the passanger side.
dont worry everything fits

[camaro2nv]

Thanks Blake for the info. Ill be dropping the rack later tonight and dropping this bad boy in!

[awr68]

So you do have the correct pads?
Thanks for clearing this up Blake!! :thumbsup:

[camaro2nv]

Yes everything looks good. I cant for for tonight!

[camaro2nv]

Ok turns out I had the pass and driver side mixed up,lol. Anyway motor is in thanks guys!

[awr68]

Sweet! :thumbsup:

[70rs]

So we can fully expect burnout videos by the end of the week right?:drive:

[Blake Foster]

Steve
thanks for taking the time to call today, glad we could straighten out your dilemma. :thumbsup:

everything fits just as designed

Steve was working late last night and the guy who handles the 24 hour tech support line had fallen asleep. HaHaHaha :willy:

sorry about that he has been replaced.

[waynieZ]

Way to go Blake :thumbsup:

[XcYZ]

Anyway motor is in thanks guys!

More pics, please. :D

[68/Camaro]

I Was looking at your photos and it looked like you had the drivers side on Pass side the Drivers side is longer and you i have Autocraft mounts along with there oil pan!
I see you figured it out on the mounts dont worry i had i little problems too any other questions would be glad to help! Like Blake had mentioned (Would be better if you take the subframe out of the car and mount Motor and Trans, Another note make sure to get the body mounting bushings from speedtech)
Thanks, Bill

[camaro2nv]

More pics, please. :D

http://www.lateral-g.net/forums/showthread.php4?t=17232&page=15

[camaro2nv]

BTW The guys at Speedtech are awesome! One of the guys is local to me and shot me a PM telling me if I had a problem getting it in to give him a call and he would come over and help. Big thumbs up to Speedtech!:thumbsup:

[FreddieCougar]

Glad you got the motor in, and all is well!
Tim