Fesler Built New Interior Almost Ready! Chevelle First Pics Molds Done [Archive]

fesler

10-02-2009, 04:32 PM

OK so as you guys know we build very high end vehicles and have been asked and asked to build parts for you guys. Well we are doing that now. We have a full line of interior products coming out for several cars like

1. 1970-72 Chevelle might work on 69 as well with mods

2. 1967-69 Camaro

3. 1970 up Camaro

4. 1955-56 Chevy 210/Belair and so on

5. 1957 Chevy car

6. 1967-68 Chevelle

7. 1967-72 Chevy Truck

8. 1970-72 Dodge Cuda/Challenger

9. 1968-70 Dodge Charger maybe more years with mods

10. 1968-72 Chevy Nova we wont forget you guys

All of these are in the works now and we will have some of these on display at the 2009 SEMA show this year with more following monthly and on display at shows around the nation.

We will have a base model, mid model and upper line in the door panels, you can buy these raw or wrapped in the material of your choice with the stitching of your choice, there will be billet upgrades on the panels. You will be able to buy dash, center consoles and package trays as well. along with full headliner kits and trunk kits.

We have a full production shop and build a main mold for all these parts and from there should be able to do about 25-50 a week if needed. So we will have full supply on these once we are finished with molds.

Here is the Chevelle set so you can see what they look like.

http://i269.photobucket.com/albums/jj73/FeslerBuilt/Interior%20Kits/Img0085.jpg

http://i269.photobucket.com/albums/jj73/FeslerBuilt/Interior%20Kits/Img0089.jpg

http://i269.photobucket.com/albums/jj73/FeslerBuilt/Interior%20Kits/Img0098.jpg

http://i269.photobucket.com/albums/jj73/FeslerBuilt/Interior%20Kits/Img0104.jpg

http://i269.photobucket.com/albums/jj73/FeslerBuilt/Interior%20Kits/Img0108.jpg

elitecustombody

10-02-2009, 05:45 PM

I like it,layout looks great, but the smaller opening by the speaker don't flow with the rest of the panel

fesler

10-02-2009, 05:45 PM

I like it,layout looks great, but the smaller opening by the speaker don't flow with the rest of the panel

Its the door handle and when you see that insert you will get it. they fit once its all together.

OLDFLM

10-02-2009, 06:11 PM

LOVE it Chris!!! Can't wait to see all the new stuff!! :thumbsup:

tmadden

10-02-2009, 09:28 PM

Estimated availibility? Cost?

slownova

10-02-2009, 10:47 PM

got a pic of those with the dash in? up by the dash does it follow the same design as the dash? it looks like its a little diffrent. i like though alot.

1badchevelle

10-03-2009, 07:59 AM

Estimated availibility? Cost?
x2 Looks great :wow:

Bakaruda

10-03-2009, 08:06 AM

If you want to look at the second gen A body mopar let me know. I am building a 69 Barracuda.

LowchevyII

10-03-2009, 11:01 AM

looks amazing. where's the 68-72 nova stuff :D

98ssnova

10-03-2009, 11:11 AM

looks amazing. where's the 68-72 nova stuff :D

i second this :yes:

fesler

10-03-2009, 11:29 AM

looks amazing. where's the 68-72 nova stuff :D

There on the list I wouldnt forget you guys as we just built one of those cars and all the billet parts for them.

z4me69

10-03-2009, 12:02 PM

ummm i hate ask this for fear of getting hit in the head but i need pics of the 69 camaro stuff

JPO1970

10-03-2009, 12:16 PM

Estimated availibility? Cost?

X2...

fesler

10-03-2009, 03:57 PM

ummm i hate ask this for fear of getting hit in the head but i need pics of the 69 camaro stuff

they are almost finished up will show them next week hopefully, you will like them they are sick and there is nothing even close on the market for the price.

tmadden

10-03-2009, 04:21 PM

they are almost finished up will show them next week hopefully, you will like them they are sick and there is nothing even close on the market for the price.

OK. What's the price going to be?

fesler

10-03-2009, 04:35 PM

larknut

10-03-2009, 06:10 PM

Looks great. Looking forward to seeing all of the finished interior products.

HunterBodyShop

10-04-2009, 04:15 PM

looks great Chris.
-Brett Hunter

SWAPMEETCRAZY

10-04-2009, 08:20 PM

we are working that up now, they will be around $800-1200 and can be wrapped in leather for under $1500 we hope. I am working up all this now and wont be able to confirm until late next week hopefully. Thanks

Just go ahead and send me the 1st set for 67-72 truck!!! Yeah i trust your taste that much!! LOL Seriously , can't wait to see those--Really want to see if you can make a skin that completely covers the steel door with a look close to the above pics!!! I will buy them!!! jim :thumbsup:

LowchevyII

10-05-2009, 12:30 AM

damn thats not a bad price point to be around especially to be leather wrapped. great work as usual guys. your nova has gotten me reinspired to get back to work on my 70.

hectore3

10-05-2009, 04:41 AM

Thinking about doing any products for 1967 A-body Pontiac Models?

fesler

10-05-2009, 07:59 AM

Just go ahead and send me the 1st set for 67-72 truck!!! Yeah i trust your taste that much!! LOL Seriously , can't wait to see those--Really want to see if you can make a skin that completely covers the steel door with a look close to the above pics!!! I will buy them!!! jim :thumbsup:

They will be very similar, I will post up shots very soon so you can see them, we have to finish 69 Camaro and 2nd gen Camaro and then the truck. We have them started so wont be long.

DAREDVL

10-05-2009, 08:15 AM

Can the '69 Camaro interior also be used in a '67, or will you be creating one to fit this year at a later date?

Thanks, and so far it looks great!

Dave

fesler

10-05-2009, 07:47 PM

We will build all the interiors we can for you guys. I think from what you have seen on our billet parts we are here to help you guys out by offiering cool parts for great prices. The more request we get for parts the better chance we will make that part.

camaro2nv

10-05-2009, 08:44 PM

Do you have a idea about cost yet? These are lookin good!

elitecustombody

10-06-2009, 07:20 AM

Its the door handle and when you see that insert you will get it. they fit once its all together.

Got it.I'm not a Camaro guy,so you have to forgive me:)

fesler

10-06-2009, 07:49 AM

Do you have a idea about cost yet? These are lookin good!

we are working that up now, they will be around $800-1200 and can be wrapped in leather for under $1500 we hope. I am working up all this now and wont be able to confirm until late next week hopefully. Thanks

colin204

10-06-2009, 07:49 AM

very interested in 1969 camaro door panels!!!!!

fesler

10-06-2009, 07:50 AM

Got it.I'm not a Camaro guy,so you have to forgive me:)

no problem at all and the only way to learn is to ask.

67ChevILL

10-06-2009, 08:09 AM

Hello, first time posting..
But really intrested to see everything you can do for a 67 chevelle..
was looking to do something custom..door panels and center console.

nice looking work! keep it up.

:cheers:

jhiphopjunky

10-08-2009, 10:00 PM

Mark Me Down For A Set Of Panels And A Dash For My 72 Chevelle.

Have You Came Up With A Price For The Dash Yet?

fesler

10-09-2009, 08:33 AM

Mark Me Down For A Set Of Panels And A Dash For My 72 Chevelle.

Have You Came Up With A Price For The Dash Yet?

working on that now so we will know something very soon.

tyoneal

10-10-2009, 05:08 AM

Chris

You have really great looking parts.

Do you think you could be persuaded to build some exterior body kits for the 69 Camaro?

1. CF or Fiber Glass

2. Make wheel opening about 1.5 inches wider, while still maintaining the natural lines of the car. I would like to be able to run wider wheels and tires. Maybe 295 mm - 315 mm

3. Body parts where true, "ground Effects", could be realized.

4 A real splitter that is strong enough and large enough to really create good down force.

I am having renderings put together of what I have in mind. I want something that is truly functional, as well as pleasing to the eye. Functional, is the operative word for this whole idea.

As I put things together, and if you are interested, it would be REALLY nice to have a first class body kit for the '69 Camaro. The mustang guys have tons of choices, and we are getting there, but have a while to go to catch up with the range of options.

Thanks for your openness for new products. There are a lot of us out here, who I bet would enjoy some true aerodynamic parts and the ability to run a lot more rubber up front.

Take Care,

Ty O'Neal

tmadden

11-09-2009, 03:47 PM

Any more updates on Fesler's interior pieces? Looking forward to some detailed info and pics.

sn75

11-09-2009, 08:30 PM

Also interested in interior pieces for my '72 Chevelle (mainly the dash) :yes:

Nick.V70

11-27-2009, 04:04 PM

I saw these panels in this car @ SEMA and they are a very nice finished look. I want a set :thumbsup:

http://www.norcaltruck.com/01_misc_pic/SEMA_09/DSC06478.JPG

tony byram

11-28-2009, 12:59 AM

Hi Chris, be sure and post some pics of the second gen camaro panels, Im looking at re doing mine with something more modern. Are the billet trim pieces included in that price? :thumbsup:

jhiphopjunky

11-29-2009, 04:58 PM

Any word on a pre-order for the chevelle door panels?

Nick.V70

11-30-2009, 05:42 AM

x2 ... I have a PM over to him asking on some other product and I would like to have these aswell.

CRCRFT78

11-30-2009, 07:14 AM

Anything in the works for the 62-65 Novas? I'd like something else other than the stock interior panels to choose from for my convertible.

Nick.V70

12-03-2009, 08:35 PM

Any word on a pre-order for the chevelle door panels?

I left a mesg on chris's vm and talked to a nice lady today but still no final word. I have pretty much everything to start installing my new int. parts either at my shop or coming next week and want a set of these door panels.

Chris let me know what it's going to take to get me some panels for my 70' please.:drool:

tones2SS

12-04-2009, 07:19 AM

I saw these panels in this car @ SEMA and they are a very nice finished look. I want a set :thumbsup:

http://www.norcaltruck.com/01_misc_pic/SEMA_09/DSC06478.JPG

That's a sharp looking car. Any more info on that Chevelle? Is it a Fesler car? Thanks!:cheers:

Nick.V70

12-05-2009, 06:24 AM

That's a sharp looking car. Any more info on that Chevelle? Is it a Fesler car? Thanks!:cheers:

My wife had to DRAG me away from this car...:hail: Yes VERY nice:thumbsup:

I didn't get the complete scoop on it so you may want to ask Chris.

tones2SS

12-05-2009, 11:27 AM

My wife had to DRAG me away from this car...:hail: Yes VERY nice:thumbsup:

I didn't get the complete scoop on it so you may want to ask Chris.

lol I bet she did!!:lol: Looks killer.:thumbsup:
Chris, any more details/pics on this bad boy??

tmadden

12-16-2009, 06:50 AM

When is Fesler going to drop some more info on these panels.
This is worse than advertising a movie 3 months ahead of time. the suspense is killing me. Great marketing technique!!!

fesler

01-04-2010, 07:21 PM

Well guys here they are, I know alot of you have been waiting for these pics for some time so here they are. We have been working on new designs and other project so that is what is taking so long. The new Camaro kit is almost finished and should have pics up in a few days. The new Camaro console is sick.

http://i269.photobucket.com/albums/jj73/FeslerBuilt/1970%20Chevelle%20Blk/Img0065-1.jpg
http://i269.photobucket.com/albums/jj73/FeslerBuilt/1970%20Chevelle%20Blk/Img0068.jpg
http://i269.photobucket.com/albums/jj73/FeslerBuilt/1970%20Chevelle%20Blk/Img0069-1.jpg
http://i269.photobucket.com/albums/jj73/FeslerBuilt/1970%20Chevelle%20Blk/Img0075-1.jpg
http://i269.photobucket.com/albums/jj73/FeslerBuilt/1970%20Chevelle%20Blk/Img0091-1.jpg

70rs

01-04-2010, 07:27 PM

VERY NICE Chris!!:thumbsup: :thumbsup:

I like that you carried it into the rear side panel too. :cheers:

Do you have any plans for second gen camaro stuff?

fesler

01-04-2010, 07:40 PM

VERY NICE Chris!!:thumbsup: :thumbsup:

I like that you carried it into the rear side panel too. :cheers:

Do you have any plans for second gen camaro stuff?

Just finishing up the 1st gen now and the 2nd gen is started. We are on them full time to get as many out as possible. There will be many panels to choose from and the center will have 2-4 different inserts as options. We are working on them now.

3_z28camaro

01-04-2010, 08:08 PM

Looking forward to seeing the 1st and 2nd gen pieces.

98ssnova

01-04-2010, 08:51 PM

Chris has a price been set for these yet. And will the 1 gen Camaro stuff work with 3rd gen Nova? Thanks

70rs

01-04-2010, 11:07 PM

Just finishing up the 1st gen now and the 2nd gen is started. We are on them full time to get as many out as possible. There will be many panels to choose from and the center will have 2-4 different inserts as options. We are working on them now.

Thanks for the update. I will be looking for updates on the second gen parts.
:cheers:

dlouie87

01-05-2010, 12:14 AM

Looks really nice :D

Richio1

01-06-2010, 02:43 PM

Love your work...cant wait to see it. Almost went with the Marquez interior kit but decided to wait to see what you come out with. Great idea to have the multiple offering on the console inserts...what a novel concept...
Please update us ASAP.

Nick.V70

01-09-2010, 02:13 PM

BBC71Nova

01-09-2010, 03:12 PM

Looks great! What seats are those? I can't seem to locate that style Recaros.

Thanks
John

7TSS

01-09-2010, 09:23 PM

Looks great! What seats are those? I can't seem to locate that style Recaros.

Thanks
John

Looks like one of the Recaro Expert (http://www.recaro.com/index.php?id=50&region=1&L=2)

Radlark

01-11-2010, 08:18 AM

I have a few questions and hopefully if it is not to much trouble you can answer them, if they have already been answered my apologies:

1. What type of material are the panels made out of?
2. Is it a combo of fiberglass and MDF?
3. how much do they weigh?
4. Can these be interegrated with the factory contour of the stock dash to
"flow"?
5. What size speaker is that cut out for 5.25 or 6.5?
6. And last nut not least do you have any images or "pre-production" of the 66-67 Chevelle panels?

Thanks looking great BTW!!!

fesler

01-11-2010, 04:52 PM

I have a few questions and hopefully if it is not to much trouble you can answer them, if they have already been answered my apologies:

1. What type of material are the panels made out of? FIBERGLASS
2. Is it a combo of fiberglass and MDF? FIBERGLASS
3. how much do they weigh? I WILL HAVE TO GET THAT FOR YOU
4. Can these be interegrated with the factory contour of the stock dash to
"flow"? YOU CAN DO ANYTHING TO THEM TO SHAPE THEM, THEY FIT THE DASH VERY WELL
5. What size speaker is that cut out for 5.25 or 6.5? 6.5 INCH
6. And last nut not least do you have any images or "pre-production" of the 66-67 Chevelle panels? I WILL HAVE THEM SOON

Thanks looking great BTW!!! Thanks

John510

01-11-2010, 06:05 PM

Damn! Im definately getting me a set of these babys. I like them better then the Marquez ones.

Chris,
I still need to order my front two wheels (hopefully you remember me). They were the ones with the red stripe (asanti)

ragtop69

01-11-2010, 07:34 PM

I like!!!! Will the first gen camaro panels work for the convertible? If so Im ready when you are....

Radlark

01-12-2010, 08:15 AM

Thanks Chris! I definitely want a set for the 67 Chevelle!!!

Nick.V70

02-12-2010, 03:14 PM

Any current updates on the chevelle panels?

fesler

02-12-2010, 05:30 PM

Any current updates on the chevelle panels?

We are shipping now and the list is large so if you want a set get on the list. I have 5 sets going out on Monday and more very soon. I will post up the install shots of them tomorrow so you guys can see what is involved with installing them.

fesler

02-12-2010, 05:31 PM

fesler

02-12-2010, 05:32 PM

I like!!!! Will the first gen camaro panels work for the convertible? If so Im ready when you are....

Camaro is finished almost and we are working on that fitment now

Nick.V70

02-13-2010, 07:21 AM

We are shipping now and the list is large so if you want a set get on the list. I have 5 sets going out on Monday and more very soon. I will post up the install shots of them tomorrow so you guys can see what is involved with installing them.

I am on the list!!! Perfect, I am gutting out the insides of my car next week :woot:

tones2SS

02-13-2010, 01:32 PM

I am on the list!!! Perfect, I am gutting out the insides of my car next week :woot:

Very cool. Should look killer with the Fesler pieces.:thumbsup:

ragtop69

02-24-2010, 03:28 PM

Camaro is finished almost and we are working on that fitment now

Thanks. I'll call for specifics.

73chally

02-26-2010, 02:03 PM

Camaro is finished almost and we are working on that fitment now
you had mentioned doing some for old challengers...anything yet?

66 mustang

02-27-2010, 06:12 PM

I Chris I know this is a bit off topic but we are coming down from Vancouver to Mesa and was wondering if my oldest daughter and I could come by for a shop tour? We will being going to the car show on Friday. If this is to crazy of a time before and after a car show, not a problem.
Thanks Wayne

Nick.V70

03-04-2010, 12:57 PM

Just talked to Cary and she is shipping my panels out tomorrow:woot:

fesler

03-06-2010, 12:19 PM

fesler

03-06-2010, 12:43 PM

Here are some shots of the panels going in so you can see how easy they are to install and the custom door handle we built for them. You can leave the handle raw, anodized, brushed or polished

Door pulls are finihed as well and they are an option to the panels. We will have 2 different sizes of these available and 2-3 styles. They will be billet and you can leave them raw, anodized, brushed or polished as well.

http://i269.photobucket.com/albums/jj73/FeslerBuilt/Interior%20Kits/Img0006.jpg

http://i269.photobucket.com/albums/jj73/FeslerBuilt/Interior%20Kits/Img0011.jpg

http://i269.photobucket.com/albums/jj73/FeslerBuilt/Interior%20Kits/Img0026.jpg

http://i269.photobucket.com/albums/jj73/FeslerBuilt/Interior%20Kits/Img0033.jpg

http://i269.photobucket.com/albums/jj73/FeslerBuilt/Interior%20Kits/Img0035.jpg

fesler

03-06-2010, 12:44 PM

http://i269.photobucket.com/albums/jj73/FeslerBuilt/Interior%20Kits/Img0037.jpg

http://i269.photobucket.com/albums/jj73/FeslerBuilt/Interior%20Kits/Img0043.jpg

http://i269.photobucket.com/albums/jj73/FeslerBuilt/Interior%20Kits/Img0044.jpg

http://i269.photobucket.com/albums/jj73/FeslerBuilt/Interior%20Kits/Img0045.jpg

http://i269.photobucket.com/albums/jj73/FeslerBuilt/Interior%20Kits/Img0046.jpg

fesler

03-06-2010, 12:46 PM

http://i269.photobucket.com/albums/jj73/FeslerBuilt/Interior%20Kits/Img0048.jpg

Here are the handles we are making from Billet

http://i269.photobucket.com/albums/jj73/FeslerBuilt/Interior%20Kits/Img0001.jpg

http://i269.photobucket.com/albums/jj73/FeslerBuilt/Interior%20Kits/Img0005.jpg

http://i269.photobucket.com/albums/jj73/FeslerBuilt/Interior%20Kits/Img0007.jpg

http://i269.photobucket.com/albums/jj73/FeslerBuilt/Interior%20Kits/Img0013.jpg

Cread01

03-06-2010, 07:32 PM

do you sell the interior door handles seperately?

Nick.V70

03-10-2010, 09:52 AM

Here are the handles we are making from Billet

http://i269.photobucket.com/albums/jj73/FeslerBuilt/Interior%20Kits/Img0001.jpg

http://i269.photobucket.com/albums/jj73/FeslerBuilt/Interior%20Kits/Img0005.jpg

http://i269.photobucket.com/albums/jj73/FeslerBuilt/Interior%20Kits/Img0007.jpg

http://i269.photobucket.com/albums/jj73/FeslerBuilt/Interior%20Kits/Img0013.jpg

Are these for the Chevelle door panels? Any pics installed yet?

98ssnova

04-05-2010, 04:07 AM

Has a final price been set and will the anadozing be extra? also I like the handles very nice by the way any word when the 3rd gen nova stuff will be out?

fesler

04-06-2010, 10:56 AM

Chevelle door panels 70-72 and we think 69 and maybe 68 with some mods are shipping now we have them in stock, Camaros are just going to the mold stages and will be shipping very soon. We have so many interiors to make we make them as requested. Obviously the ones with more request will be built first. I am going to start a new poll thread so we can make what you guys want next.

Thanks

93Polo

04-06-2010, 09:03 PM

Please post some pics with the handles installed on the car when you get them. I like this interior.

Nick.V70

04-08-2010, 10:58 AM

I want to say that I got mine a couple weeks back and not even had a chance to try them BUT I already have been called by a Fesler employee a couple time to see what I thought and how the install went. I have to say in a time when a business must stay lean and mean to survive having a person on the books to place calls like that is awesome:bow: Hats off to the customer service:thumbsup:

Now can you just send a guy up north to install them for me:lol:

Really Thanks Fesler Crew!!!

rocketrod

04-14-2010, 05:43 PM

I am interested in a set of door panels for a 69 Camaro! I am interested in a set finished in leather if possible. Also do you offer a rear package tray?

rocketrod

06-24-2010, 07:02 AM

Just checking to see if these are available finished in leather for 69 Camaros?

Nick.V70

06-24-2010, 08:43 AM

I have my panels and arm rests already from Fesler and they are awesome but I purchased un-wrapped because I was not sure how I was going to finish them. When I talked to one of the guys over there they said they are working on making these available covered, it sounded like they are trying to figure out the best way to offer it because it's hard to make it so everyones happy.

I would suggest calling and talking to Darius, really nice guy that was able to help me with all my questions and even offered help on the panel install but I had not got that far so he said to call him back if I had problems. Pretty nice I thought:thumbsup:

fesler

07-06-2010, 09:25 AM

Taking orders now for 1969 Camaro door panels, package tray and center console (fits stock base from 69 Camaro). They are finished and we are finishing the test fits so pre order yours today. The molds are finished and we have one more car to test fit and they will be shipping

fesler

07-06-2010, 09:26 AM

Just checking to see if these are available finished in leather for 69 Camaros?

You can buy the panel but not wrapped yet? we have to figure out the best way to do this as each car we put them in is a llittle different and they need to line up front to back. We think we have a way to do it but will be a few more weeks till we know for sure.

You can order panels for now

fesler

07-06-2010, 09:26 AM

I am interested in a set of door panels for a 69 Camaro! I am interested in a set finished in leather if possible. Also do you offer a rear package tray?

Yes we have rear package tray and center console as well

fesler

07-06-2010, 09:28 AM

do you sell the interior door handles seperately?

yes you can buy them from our store http://www.shopfesler.com/products/Fesler-Billet-Arm-Rest.html

fesler

07-06-2010, 09:34 AM

Are these for the Chevelle door panels? Any pics installed yet?

These are for any door panel you want to use them on all you need is a flat surface. Pics of the Chevelle coming soon

Nick.V70

07-07-2010, 03:22 PM

These are for any door panel you want to use them on all you need is a flat surface. Pics of the Chevelle coming soon

Thanks but your late....I have them sitting here and can see how bad ass they are in real life!!! :bow: :cheers:

1badchevelle

07-07-2010, 03:30 PM

Thanks but your late....I have them sitting here and can see how bad ass they are in real life!!! :bow: :cheers:

Please share some pics don't hold out on us poor folks.:cheers:

Nick.V70

07-07-2010, 03:37 PM

Please share some pics don't hold out on us poor folks.:cheers:

I knew I opened my mouth....:lol:

Let me finish up a few things at my desk and I will go down stairs and take pics and see if I can post some tonight or for sure tomorrow. They are not wrapped yet but almost ready for my test fit/install on the panels. Everyone that has seen then is very impressed on the quality for a product that is production made.

Nick.V70

07-08-2010, 06:51 PM

Here is pics:

Happy day when they showed up!!!
http://www.norcaltruck.com/01_misc_pic/70'%20Chevelle/Interior/Fesler%20Panels%2001.JPG

http://www.norcaltruck.com/01_misc_pic/70'%20Chevelle/Interior/Fesler%20Panels%2002.JPG

http://www.norcaltruck.com/01_misc_pic/70'%20Chevelle/Interior/Fesler%20Panels%2003.JPG

And with there new arm rest....

http://www.norcaltruck.com/01_misc_pic/70'%20Chevelle/Interior/Fesler%20Panels%2004.JPG

Sorry Brutus wanted to help out...

http://www.norcaltruck.com/01_misc_pic/70'%20Chevelle/Interior/Fesler%20Panels%2005.JPG

http://www.norcaltruck.com/01_misc_pic/70'%20Chevelle/Interior/Fesler%20Panels%2006.JPG

BanditDave

07-12-2010, 09:35 AM

What are the odds that these could work on a '69 Cutlass 442 with minimal mods?

Thanks!
Dave

Nick.V70

07-14-2010, 09:28 AM

What are the odds that these could work on a '69 Cutlass 442 with minimal mods?

Thanks!
Dave

Try and get your hands on some 70-72 OE panels, maybe cheap used ones and do a test fit. That would be the cheap way for you to find out.

fesler

07-14-2010, 09:39 AM

What are the odds that these could work on a '69 Cutlass 442 with minimal mods?

Thanks!
Dave

They will fit from what we are told, we just made some mods so they go from 1968-72 Chevelle and from what we have been told the Cutlas is the same. Lets see if someone else up here can help answer the question.

SS454

07-17-2010, 07:55 AM

Is it just me or does this door panel scream for some type of pull like this, out of aluminum, sort of like you would find on the 350z. Excuse the crude example.
Lets get on this Fesler, I know you have the ability.
The pull/arm rest I've seen just doesn't flow with the lines of the panel.
http://i119.photobucket.com/albums/o132/chasesyc/FeslerPanels03.jpg

markd

11-10-2010, 07:06 PM

I am finally getting around to posting a few pics of Fesler’s door panels being installed on my 69 Camaro. The fit and finish on these are outstanding!

http://i254.photobucket.com/albums/hh82/camaro69vn10/MAD%2069%20Camaro/IMG00207-20101013-1830.jpg

http://i254.photobucket.com/albums/hh82/camaro69vn10/MAD%2069%20Camaro/feslerdoorpanels014.jpg

http://i254.photobucket.com/albums/hh82/camaro69vn10/MAD%2069%20Camaro/feslerdoorpanels018.jpg