Size/fitment of Lee box?

[AALynch]

I have been getting ready to pick up a new box for my 69 Camaro, as I've heard it makes a tremendous difference...I've got an LS1 with Stainless Works headers on it, that have the second primary wrapped on top to clearance the box...will the Lee box clear my headers?

http://img.photobucket.com/albums/v480/1fine69/Camaro/LS1%20Swap/IMG_1553.jpg

Thanks,

-Adam

[rogue]

My lee Box is GIGANTIC and I've tried 4 sets of headers trying to get it to fit....

I ended up having a set of patriot headers modified by a local exhaust shop and recoated...

[skatinjay27]

the question isnt will a lee box cause they sell a 670 box and a 800 box for our cars.
the 670 is a smaller box than a stock power steering box so if you have a stock power box now youll gain more room. its lighter also
the 800 is the same size as the stock.

[ProdigyCustoms]

I use 600 boxes. A bit more petite and i love the feel.

[Neki67]

It also depends on which adapter plates you used to mount the LS engine. The further back, the easier (i.e. Edelbrock, Hooker).

[strtlegal]

This was taken at the begining stages of my build. I'm running an ATS box and the Autokraft/ATS mounts, with Stainless works headers. I had to massage two tubes..It was super easy with the headers since they came in raw form. I just did some heating bending then just polished it right up..

Kind of hard to see in this pic but it might help some..Good luck

http://i25.photobucket.com/albums/c84/strtlegal/nova%20progress%20pics/100_2993.jpg