FOR SALE: A-body frt & rear suspension

[BobB66SS]

See below for revised ad.

[BobB66SS]

Add'l parts sold: front sway bar, Hotchkis boxed rear trailing arms.

[BobB66SS]

Add'l parts sold: front sway bar, Hotchkis boxed rear trailing arms.

Spindle/hub/caliper bracket assemblies, stock front LCAs, and stock rr upper trailing arms still available.

[BobB66SS]

I've been asked by some folks if I'm willing to separate the spindle/hub/caliper bracket components. So as requested:

Belltech 2" drop B-body tall spindles with integral steer arms; Baer bearing hubs (5 x 4-3/4 Chevy bolt pattern); and brackets for Baer Track System PBR calipers -- $400 for pair as assemblies.

Spindles -- $150 for pair.

Bearing hubs -- $185 for pair.

Caliper brackets -- $90 for pair.

Thanks again.

[BobB66SS]

Bump. Would like to clear some garage space.

Thanks again.

[BobB66SS]

Bump to move remaining components below. Prices noted are about half of what they cost new; reasonable offers considered as well.

=============

Belltech 2" drop B-body tall spindles with integral steer arms; includes Baer bearing hubs (5 x 4-3/4 Chevy bolt pattern) and brackets for Baer Track System PBR calipers -- $400 for pair as assemblies. Prices for individual components are below.

Spindles -- $150 for pair.

Bearing hubs -- $185 for pair.

Caliper brackets -- $90 for pair.

Also have following stock components:

Stock front lower control arms -- $145 pair.

Stock upper rear trailing arms -- $85 pair.

[BobB66SS]

Add'l info -- according to Baer, the spindle is from an early '80s B-body that they used to get from Belltech and then modify to fit the Baer caliper bracket and larger rotor. Since A-body-specific spindles are now available they don't have to go thru those modifications any longer. But they will fit any 64-72 A-body and worked great on my car since 2003.

Reasonable offers definitely considered.