PDA

View Full Version : Speed Tech Road Trip


FreddieCougar
08-04-2009, 10:38 AM
Hey everyone..
A couple of us from SpeedTech will be in the LA area for a couple of days later this month and are looking to visit a couple of shops and hopefully see some cool projects underway. Any ideas for us?
Tim

tones2SS
08-04-2009, 11:10 AM
Take some pics for us Tim!!:cheers:
And be safe out there.

camaro2nv
08-04-2009, 11:21 AM
Tell Blake to clear his inbox! Thanks:thumbsup:

70rs
08-04-2009, 11:25 AM
:cheers: Please drive either one of the 69's down. Stop at my house on the way and just drop one off here. You can use my truck (better mpg ya know). I'll take real good care of the car. I'll even make sure the gas does not go bad from sitting. And make sure the tires don't get flat spots from sitting too.:D :rofl:
Have a good trip guys! We need lots of pictures!

Blake Foster
08-04-2009, 11:26 AM
box is empty now

HWY Nova
08-04-2009, 11:30 AM
Next to LAX is Anvil.

North of LA is Ironworks Speed & Kustom!!!!

In Chatsworth is Bent Fabrication.



--Eric

James OLC
08-04-2009, 11:39 AM
Best of Show Coachworks is in San Marcos - there might even be a '67 Camaro from the Great White North hanging around depending on when your going to be around.

Ironworks S&K in Bakersfield is an awesome stop and well worth a visit - Rodger has some really cool stuff on the go.

David Pozzi
08-04-2009, 11:40 AM
Monterey Historics at Laguna Seca Aug 15-16th, may be too early in the month for you though.

70rs
08-04-2009, 11:41 AM
You will also be passing Bruning on the way in southern Wa. near Vancouver.
Tim is a great guy and if you have not seen the Challenger in person it's well worth a stop.

Steve1968LS2
08-04-2009, 02:45 PM
Hey everyone..
A couple of us from SpeedTech will be in the LA area for a couple of days later this month and are looking to visit a couple of shops and hopefully see some cool projects underway. Any ideas for us?
Tim

You could come by Best Of Show in San Marcos and say howdy! There's another cool shop up in Oxnard called JCG Restorations. Track Rat is there right now getting a secret project done.

On Saturday morning you should go to Cars And Coffee in Irvine CA and/or Donut Derelics in Huntington Beach CA.. both great places to check out cars.

bentfab
08-04-2009, 05:11 PM
Give us a call and stop on buy. We have a few cool projects. 818-701-6147

What days are you going to be here. If it's the end of the month we will also have two BAD A$$ 69's we will be plumbing then.

FreddieCougar
08-04-2009, 07:53 PM
You could come by Best Of Show in San Marcos and say howdy! There's another cool shop up in Oxnard called JCG Restorations. Track Rat is there right now getting a secret project done.

On Saturday morning you should go to Cars And Coffee in Irvine CA and/or Donut Derelics in Huntington Beach CA.. both great places to check out cars.

Funny....I already arranged to go see Cris!

Blake Foster
08-04-2009, 08:20 PM
i gotta get some more sienority arround here????
DAMN!!
i guess someone has to stay and keep the lights on!!

bentfab
08-04-2009, 10:16 PM
Funny....I already arranged to go see Cris!

If it works out one of the cameros is coming from Chris at JCG. As a matter of fact we talked yesterday about it.

CptKlutz
08-05-2009, 12:11 AM
Depending on what you consider "LA area" you could check out http://www.cprstreetmachines.com/ in north east San Diego, always a few interesting things going on!

FreddieCougar
08-05-2009, 04:10 PM
i gotta get some more sienority arround here????
DAMN!!
i guess someone has to stay and keep the lights on!!

What is this "seinority" you speak of, and where can I get some?
(or...maybe I shouldn't be poking fun at the boss.....!)

DFRESH
08-05-2009, 09:29 PM
You could come by Best Of Show in San Marcos and say howdy! There's another cool shop up in Oxnard called JCG Restorations. Track Rat is there right now getting a secret project done.

On Saturday morning you should go to Cars And Coffee in Irvine CA and/or Donut Derelics in Huntington Beach CA.. both great places to check out cars.


Blake, Roger, Tim--Let me know if you guys are going to make it Cars and Coffee in Irvine or Derelics (yeah, that is the right name--lots of us just abbreviate it). I just finished putting your stuff on the car (purchased from Blake at SEMA) and would enjoy seeing you guys again. I'll bring the car down and you can bag on it--LOL. Hope to see you guys.

Doug

Blake Foster
08-06-2009, 07:39 PM
that would be awesome Doug send Tim a pm and give him the details as i will not be comming down but you, tim and Roger should hook up for sure.

Iamtheonlyreal1
08-07-2009, 11:40 AM
You could check out this Firebird in California, It is an awsome build in progress. Proud to say they decided to use my product instead of moding the body...

I believe the car is located in Hunington Beach. Real nice guys.

http://www.hotrodscustomstuff.com/1968-firebird-01.html

Matt@BOS
08-07-2009, 08:38 PM
That Firebird is actually about a mile down the street from Best of Show. I saw it several times while my project was over there. That car is going to be wild. I'm guessing its really close to completion now too.

Gordz32
08-07-2009, 08:43 PM
You guys are always welcome here at BOS. And were always there at the shop.

Tom.A
08-07-2009, 09:13 PM
You could check out this Firebird in California, It is an awsome build in progress. Proud to say they decided to use my product instead of moding the body...

http://www.hotrodscustomstuff.com/1968-firebird-01.html

That's a pretty wicked build :thumbsup:

Cris@JCG
09-06-2009, 12:25 PM
Had Roger & Paul stop by the shop & got to drive their test car.. Fricking awesome!!! Have two projects that will be using Speed Tech suspension!!:thumbsup:

Blake Foster
09-07-2009, 07:16 PM
since roger and paul don't get on here much i will thank you for taking the time to show the guys arround. also glad you got to drive the car that is really the whole idea let it do the talking.
wish i could have meade the trip, next year i guess

awr68
09-08-2009, 08:55 PM
Had Roger & Paul stop by the shop & got to drive their test car.. Fricking awesome!!! Have two projects that will be using Speed Tech suspension!!:thumbsup:

I have driven that car...it performs very well and was a blast to drive!
:thumbsup: To Speed Tech!!

ironworks
09-08-2009, 09:01 PM
So when are you guys coming through Bako? I want to drive that rig.

Cris@JCG
09-08-2009, 09:04 PM
Your welcomed to visit anytime!!! Please thank Roger & Paul for the visit! I enjoyed taking shop with them..


since roger and paul don't get on here much i will thank you for taking the time to show the guys arround. also glad you got to drive the car that is really the whole idea let it do the talking.
wish i could have meade the trip, next year i guess

Cris@JCG
09-08-2009, 09:13 PM
Can I visit??? I want to drool over the builds @ your shop has going on!! YOU & your crew do so out of these world car building!!:bow:

So when are you guys coming through Bako? I want to drive that rig.

ironworks
09-08-2009, 10:11 PM
Can I visit??? I want to drool over the builds @ your shop has going on!! YOU & your crew do so out of these world car building!!:bow:

Sure just let me know when. and Thanks "WE" try hard.

Cris@JCG
09-09-2009, 07:14 AM
I will schedule a visit with you sometime after SEMA.. You have motivated me to learn Soildworks.. got it loaded in my puter this week!

Sure just let me know when. and Thanks "WE" try hard.

Blake Foster
09-09-2009, 08:11 AM
hey Rodger. i think the guys went past at about 2 in the morning both ways i know they were wanting to stop.
next time