"A" body Chevelle coil over rear suspension

[Blake Foster]

I wanted to throw up a quick post to let you all know about our New coil over conversion rear suspension kit.
the kit can be purchased 3 ways.
complete including all 4 arms, shocks/springs, adjustable 1" sway bar, and all hardware.
arms only which also include a sway bar.
coil over conversion which includes everything required to replace the existing coils and shocks.

here is the link to the web page that has all the information and pricing
http://www.speedtech-performance.com/index.cfm/page/ptype=results/category_id=231/home_id=231/mode=cat/cat231.htm
and here is our test car that has the complete front and rear installed.

[T-Type]

i've seen that car a few times in person and never get enough of it. extremely well done. :thumbsup: sorry about detracting from the original intentions of the post......

[70 chevelle]

Are the Brackets for the coilovers available seperately?

[Ummgawa]

How Much??

[Blake Foster]

The brackets will not be available seperatly at this time.
all the pricing is on the web pages as it depends on what kit you wanted
arms only, with sway bar 1199.00
coil overs only 849.00
or both as a complete kit. 1995.00

link to page http://www.speedtech-performance.com/index.cfm/page/ptype=product/product_id=185/category_id=231/home_id=231/mode=prod/prd185.htm

[tones2SS]

WOW!! Looks good guys. I love the stance.
Is that Chevelle minitubbed as well? Looks awesome.:cheers:

[awr68]

Nice looking parts and car! Hey can I take that one out for a spin too!! :unibrow: :thumbsup:

[Blake Foster]

the car is not mini tubbed it runs 20x10's with 295/30/20 toyos on the back
hey Tony.................. NO!!!!! hahahah

[crazycarl]

I like the stance on that car. :thumbsup: Is it completely coil-overs or is it on air?

[FreddieCougar]

No air .....that stance is on coil overs.

[dhutton]

Anything planned for 64-67 A bodies?

Don

[crazycarl]

No air .....that stance is on coil overs.

Nice. We may be talking in the future, I like the way that car sits.

[cwylie]

Of course they don't fit a 67..... :-(

[Blake Foster]

we are working on it should be done in a month or so, just hang in there
or shoot me a pm

[Blake Foster]

Anything planned for 64-67 A bodies?

Don

yep we are working on it
hang in there

got a few things going on right now

[cwylie]

Is the rear narrowed to make the wheel lip that big?

[JKnight]

So I see this is being marketed as a Chevelle specific kit. Would there be roadblocks to using this kit on a GTO of the same year range? Or would this necessitate another design by you guys?

[FreddieCougar]

It fits both the GTO and Cutlass, in addition to the Chevelle.
Tim

[JKnight]

Cool. I figured as much, I'll pass this along to a potential buyer.

[cwylie]

What are you running on the front?

[Blake Foster]

It is running our complete Track Time Package
that includes:
Upper Amd Lower Tubular control arms
QA1 Gmp Coil over conversion shocks
1 5/16 front sway bar
Tie Rod Sleeves

the rear is
Coil over conversion QA1 shocks
Upper and Lower Atriculink Trailing Arms
3/4 adjustable Sway Bar.

http://www.speedtechperformance.com/index.cfm/page/ptype=product/product_id=186/category_id=215/home_id=215/mode=prod/prd186.htm

here is the complete kit on our site

[Blake Foster]

Is the rear narrowed to make the wheel lip that big?

i think we had to aorrow it 1/2 each side???? but it is not mini tubbed the wheel has a VERY shallow mounting pad which allows for more lip also

[TonyG]

Great looking package. I will keep an eye put for that 65 Kit!