View Full Version : 69 Camaro Dash board
sul423
10-17-2005, 09:01 AM
I have 69 ss rs Camaro,
http://www.image-hosting.us/easy/store/69SS2.jpg
http://www.image-hosting.us/easy/store/69SS5.jpg
soon I will restore it but past owner was install a 67 Dash board
http://www.image-hosting.us/easy/store/69SS9.jpg
Can any body help me to find 69 Camaro dash board (Stock, Custom, Modified)
Or can I have any advice.
Wow...that is Odd for someone to do that! I am probably not the best person to answer your ? but I would say you are going to need a donor car for the dash depending how much of what you have it is from the original 69 and how much was cut away. You can cut a dash out from a donor and then get some of the repro pieces, but I don't think you can do the entire thing with aftermarket panels.
Tim
Derek69SS
10-17-2005, 10:43 AM
Maybe CAMAROBOY still has the one he cut out of his car ???
Scogin918
10-17-2005, 11:19 AM
call Rick's 1st Generation or www.firstgen.com. Also, what's up with the reverse lights? RS reverse lights were seperate from the taillights and below the rear bumper. Your tailpanel looked smooth down there.
I think the 67-8 dashes look better than the 69 anyway. I'd leave it or fabricate a custom dash.
sul423
10-18-2005, 04:43 PM
Wow...that is Odd for someone to do that! I am probably not the best person to answer your ? but I would say you are going to need a donor car for the dash depending how much of what you have it is from the original 69 and how much was cut away. You can cut a dash out from a donor and then get some of the repro pieces, but I don't think you can do the entire thing with aftermarket panels.
Tim
Thank you BC69, This idea is good but I looking for new style now.
sul423
10-18-2005, 04:45 PM
Maybe CAMAROBOY still has the one he cut out of his car ???
How is CAMAROBOY is it member here?
sul423
10-18-2005, 05:20 PM
call Rick's 1st Generation or www.firstgen.com. Also, what's up with the reverse lights? RS reverse lights were seperate from the taillights and below the rear bumper. Your tailpanel looked smooth down there.
Thanks for the web site, for the reverse lights the past owner remove it and fix the place to be smooth and put other tail lights (standard or Z28).
you can see the reverse light place in this picture
http://www.image-hosting.us/easy/store/Reverselightplace.jpg
Now I already have the RS back lights and reversing lights from Classic Industries.
Derek69SS
10-18-2005, 05:22 PM
How is CAMAROBOY is it member here?
http://www.lateral-g.net/forums/showthread.php4?t=1445&highlight=2002+DASH
sul423
10-18-2005, 05:28 PM
I think the 67-8 dashes look better than the 69 anyway. I'd leave it or fabricate a custom dash.
tank you 69rs for replying maybe I well make it custom aluminum dash same race dashes.
sul423
10-18-2005, 05:52 PM
When I searching for dash board I found this one in Glasstek Fiberglass, INC www.glasstek.com (http://www.glasstek.com)
Camaro dash 55" wide
http://www.glasstek.com/Gallery/69camarodash3.jpg
This dash only need little cut for gauges, I see this is best choice for me and it cost $260.00.
If there any comments please reply.
sul423
10-18-2005, 06:12 PM
http://www.lateral-g.net/forums/showthread.php4?t=1445&highlight=2002+DASH
Thanks alot, Its realy cool.
Derek69SS
10-18-2005, 06:46 PM
Thanks alot, Its realy cool.
I posted that thinking you should contact him to see if he still has the original dash he cut out. Maybe he'll offer it complete for a pretty reasonable price??? :)
vBulletin® v3.8.11, Copyright ©2000-2024, vBulletin Solutions Inc.