Motor Storage??

[CE69]

Very excited! Just bought a Pro-Charged 427! Pretty good deal and couldn't pass it up. Going to have to study up and learn more on pro-charged motors.
Problem is my car will not be ready for a motor for about a year or so. What is the best way to store or preserve the motor? I think I have some ideas like change the oil, drain the carb and tape up the exhaust ports. I don't want to back off the rockers if I don't have too, but will if necessary. What else can I do to help preserve the carb and cylinders and anything else that could go bad? Any and all help will be appreciated. Thanks

[rjsjea]

Climate controlled environment and turn it over once in awhile manually. Drain the carb, tape up the holes!

[XTRMEASURES]

couldnt you just put it on a stand and run it everyones an awhile.

[lewismd71]

Climate controlled environment and turn it over once in awhile manually. Drain the carb, tape up the holes!

In addition, I would put a small amount of oil in the cylinders through the spark plug holes just to prevent surface corrosion. Then reinstall spark plugs.

[69-X44]

I fogged my engine cylinders through the spark plug holes. Check out your local parts store and they should have engine fogger in a spray can.