best place to buy new door hinges for the camaro

[speedshftr]

i need both sides and im wondering where the best place to buy them from is?
thank you

[Rhino]

Do you need the full hinge, or could you get by with a rebuild kit?

I picked up a set of rebuild kits from Rick's first gen and had good luck with them. As of a year ago, it seemed they had good full hinges as well. Their customer service was good, although I haven't dealt with them since they got bought out by Ecklers.

[ProdigyCustoms]

The new repro hinges are very weak, to cheesy of steel used in them. They bend and lose door adjustment over time. I would source some used originals if yours are not rebuildable. Maybe E bay?

[speedshftr]

the doors both sag a touch when opened.i put the doors on last weekend and you can lift them a touch on both sides.would a rebuild kit be okay?there not really to bad i just want to make sure the car is rite since im in it so far now.thank you guys for your help.frank do you sell the rebuild kit?

[simbad's68]

Sounds like you may just need new bushings.

[ProdigyCustoms]

Buy a bushing and pin kit with oversize bushings so you can drill them out to a new round hole. They work out very good. Much better then new repros

[speedshftr]

who do you recomend to get the bushing kit from?

[redfire69]

Year One has them: http://www.yearone.com/serverfiles/part.asp?pid=RU1105R&c=0&e=0&cat=8&hid=820AD11998&trk=12

http://www.yearone.com/images/parts/ru0_ru5/ru1105r.jpg

[almcbri]

Year One has them: http://www.yearone.com/serverfiles/part.asp?pid=RU1105R&c=0&e=0&cat=8&hid=820AD11998&trk=12

http://www.yearone.com/images/parts/ru0_ru5/ru1105r.jpg
I used the same kit on my car and the hinges work great now. Frank is 100% right on repop hinges.

[speedshftr]

thanks a ton everyone.im going to order them tonight