PDA

View Full Version : DSE coilover modified subframe, 1st gen

ohcbird
05-21-2009, 10:24 PM
SOLD SOLD SOLD


Stock 68 subframe with DSE coilover kit installed, with the following:

DSE coilover kit installed & welds cleaned up on most of the frame
DSE Koni coilover shocks & springs (currently 650s)
DSE Upper control arms
DSE lower control arms
Stock spindles (completely cleaned & repainted)
Hotchkis hollow swaybar

$2850 plus shipping. The frame will be resprayed in chassis black before shipping, so you get a nice clean frame to install. The UCAs & LCAs are new & have just been mounted for fittment (vey minor scratches, if any). The coilovers and springs have never even been out of the box from DSE.

The frame is located at Jake's RodShop in Bridgton, Maine. As for shipping, we can work something out. No pics right now, as the frame is waiting for a buyer to decide what he wants...then we'll squirt it. Since Jake sells frames & ships them, you can be assured that your frame will not be shipped strapped to 4 tires!

I have lots of other parts that can be added on to form many different combos: (all parts listed below are new as well)

1. ATS short spindles (recommended by Tyler @ ATS and DSE)
2. Wilwood SL6 front brake kit for stock spindles
3. Touring Classics C5/C4 hybrid kit (stock spindles) that allow you to use TTIIs and many other 17" standard hoop wheels
4. DSE steering box (600), ceramic coated
5. Unisteer rack and pinion kit
6. The set of adjustable QA1 coilovers and spring that came with the frame (550s)

Contact me via PM or email at hartjeff AT comcast DOT net
JEFF
NvrDun71
05-22-2009, 07:51 AM
PM Sent
ohcbird
05-22-2009, 02:05 PM
The DSE steering box would come with the rag joint, and the appropriate fittings.

As of now, I'd like to leave the buyer's options open, but all the parts are for sale at this point.

Jeff
NvrDun71
05-22-2009, 03:14 PM
The DSE steering box would come with the rag joint, and the appropriate fittings.

As of now, I'd like to leave the buyer's options open, but all the parts are for sale at this point.

Jeff

Jeff, shoot me a price when you are ready. I was just about to order this setup via DSE when I ran across your ad. Let me know, Thanks....
lsb
05-22-2009, 08:17 PM
very interested do you have any pics? if so email me at [email protected]
ohcbird
05-22-2009, 09:54 PM
Jess-
If no one wants the box with the sub, I'll let it go for $525. Rag joint + fittings will run an extra $75.

lsb-
I'll take some pics, but be warned- right now it's just a painted frame with the UCAs/LCAs taken off to protect them. What exactly are you interested in, the frame without any 'options'?
Steve68
05-22-2009, 10:17 PM
Jeff, too bad you don't have the sub at the house, I would have been there this afternoon, damn, Steve
ohcbird
05-22-2009, 11:03 PM
That could be arranged! We can cut you a sweet deal on shipping brother...let me know what you want, as a bunch of the 'other parts' are down in FL.
NvrDun71
05-23-2009, 02:01 AM
Jess-
If no one wants the box with the sub, I'll let it go for $525. Rag joint + fittings will run an extra $75.

Jeff... That sounds fair. Shoot me a PM if and when you decide to sell it separately. Thanks- :cheers:
ohcbird
05-23-2009, 08:51 AM
OK- I've had several PMs about the DSE box & ATS spindles; the DSE box & rag joint (with fittings) are 525 + 75 respectively. The ATS short spindles are $600. First one to get me $$$ gets them.
NvrDun71
05-23-2009, 10:06 AM
OK- I've had several PMs about the DSE box & ATS spindles; the DSE box & rag joint (with fittings) are 525 + 75 respectively. The ATS short spindles are $600. First one to get me $$$ gets them.

Another PM Sent....
ohcbird
05-23-2009, 06:26 PM
PMs replied to.
lsb
05-23-2009, 06:59 PM
Jess-
If no one wants the box with the sub, I'll let it go for $525. Rag joint + fittings will run an extra $75.

lsb-
I'll take some pics, but be warned- right now it's just a painted frame with the UCAs/LCAs taken off to protect them. What exactly are you interested in, the frame without any 'options'?

is the dse box smaller than stock one? also does frame have any damage? I am looking for a nice piece for my 68 firebird!
ohcbird
05-23-2009, 10:13 PM
The DSE box is about the same size as the stock box, but it does appear to be slightly smaller... negligible at best.

There is no damage to the sub; it's been very well taken care of & detailed. Let me know what you're interested in.
lsb
05-24-2009, 10:05 AM
I am interested in sub with rotors, calipers ,control arms ,coil over shocks ,sway bar ,drop spindals. also has frame been media blasted? I would like to see pics if possible i am ready to put something under this car. I was ready to buy a dse sub but i would rather have a real nice stock frame with dse hardware.
ohcbird
05-24-2009, 02:04 PM
The frame has been blasted & the welds have been reinforced. There is also a notch for an AC compressor should you choose to run an LS engine. I'll take some pics & get them to you later today (I'm still doing a bunch of wiring work).

Going through the list of what you want, I noticed you asked for drop spindles- I don't have those. I do have stock spindles and a Wilwood 6 piston kit that is designed for them. The sub with the Wilwoods and all the parts you asked for (with regular spindles), shipped to you (assuming you are in the lower 48) will be $4800. Let me know if you're serious, so we can get everything together to ship it out.

Jeff
PH# in a PM to you LSB...
ohcbird
05-31-2009, 11:38 PM
DSE sub & DSE parts (other than the steering box+it's parts) have been sold. I still have the unisteer kit.
meenaggie
06-03-2009, 09:25 PM
PM sent on the DSE box.
lsb
06-07-2009, 06:29 PM
Thanks for the subframe! :cheers: