More CF parts from Anvil arrived today!

[Teetoe_Jones]

Oh yes!! The hood I've been pushing for is here; the stock type flat hood. Perfect for recreating that vintage 67/68 Trans Am race car look, shedding weight, and looking cool.
Topside:
http://i41.tinypic.com/2zid4rk.jpg

Backside:
http://i44.tinypic.com/2nhj3lv.jpg

2nd Gen F body flat hood:

http://i43.tinypic.com/263tx87.jpg

1st gen Nova flat hood:

http://i40.tinypic.com/2egfm9j.jpg

68-69 A pillar Gauge pods in Matte and Glossy finishes:

http://i42.tinypic.com/jpwx88.jpg

We have a bunch more stuff to unpack like arm rests, 2nd gen F body radiator close out panels, 2nd Gen f body door trim, etc. It's an exciting time with more stuff on the way!

Tyler

[BBC71Nova]

OK. Enough already. We gotta have some 3rd gen Nova parts :unibrow: .

Looks great!

John

[chr2002ca]

That's beautiful stuff. It's great to see your lineup filling out. Do you have any plans to release a CF hood for the 2nd Gen(70-76) Firebird or Trans Am?

[Teetoe_Jones]

More stuff we just unpacked! Gauge pods for the stock 68-69 Camaro console in matte and glossy finishes:

http://i39.tinypic.com/1zlc520.jpg

2nd gen Camaro close out panel:

http://i41.tinypic.com/309pvk8.jpg

Arm rests in matte and glossy finishes:

http://i43.tinypic.com/voaqlc.jpg

2nd gen camaro upper door panels:

http://i43.tinypic.com/2gxft03.jpg

We sure could use a 3rd gen Nova at our shop for test fiting and some parts for tooling. If anyone has a really nice 68-72 Nova in the LA area, shoot me an email at [email protected] so we can discuss. We are also looking for some nice 64-72 Chevelles.

Tyler

[rogue]

Tyler I actually dropped by friday to say hello, met and talked with Matt a bit. Cool to stop by and welcome to Socal.

I was hoping to check out your towhook :P

That second gen front end is awesome.

-Dane

[Cread01]

I have been waiting for a close out panel like that for years for the second gens. any pricing or availability info yet?

[tyoneal]

Your part look terrific.

Any Idea if you would ever do fenders or door skins?

Ty

[groovyjay]

And when will we see some Corvette C1-C3 CF stuff? :unibrow: Looks awesome! :cool:

[XcYZ]

That is some nice, nice stuff!

Have you guys thought about a 1st Gen F-body package tray? I think that piece in satin would be pretty cool.

[AALynch]

Do you guys make a close out panel for a 69 Camaro?

Thanks,
-Adam

[JETSET700]

How about a dash insert for 67'-68' designed for the Racepack?

Peter

[70rs]

X2 on the second gen front end! Looks killer! I would really like some more info on the close out panel and the front end. The urethane on my 70 rs is garbage and I really like the "seamless" look of the CF version.
PM sent
Thanks,
Eric

Tried to send PM. Your in box is full.

[BBC71Nova]

Some carbon dash bezels for 3rd gen Novas would be awesome too. There is one - or at least a look alike - on the market now but quality and customer service seems to be questionable. One built with what seems to be great Anvil design and customer service would be awesome.

Oh, and I'd take you up on the Nova offer if I were only a little closer to LA :yes: .

John

[Teetoe_Jones]

Here is the closeout panel for the 2nd gen Camaro off the car before we test fit it:
http://i44.tinypic.com/2j35qbl.jpg

We are planning on making a 1st gen version as well.
Here are the arm rests installed on my car. Matches the A pillar trim in matte nicely, very subtle. I might have to get the center dash gauge cluster in CF matte finish too.

http://i39.tinypic.com/2v16wer.jpg

http://i42.tinypic.com/2z4fkur.jpg

Tyler

[XcYZ]

Here is the closeout panel for the 2nd gen Camaro...

We are planning on making a 1st gen version as well.

Cool! Glad to hear that. :cheers:

[Teetoe_Jones]

Guess what?

We had the chance to check out a 3rd gen Nova on Friday (thanks again Eric) to confirm our suspensions that our cowl panel from the 67-69 Camaro would fit the car flawlessly.

http://i43.tinypic.com/2wphwmx.jpg
http://i40.tinypic.com/2poa82s.jpg

We were correct. So we took one of our recess/screen delete cowl panels for the 67-69 Camaro and it popped right onto the 3rd gen Nova and looked right at home. We are acquiring a cowl hood and rear trunk for the Nova to begin tooling for some more parts.

So if any of you 68-74 Nova gents need a smother lighter look for your car, we have these in stock!

Tyler

[CRCRFT78]

What else is in the works for the 1st gen Novas other than the hood? Any idea if you'll be working on any G-body parts in the future?

[Lessk]

I love you guys. I will so be a customer when I get to that point in my build.! :yes:

Have you thought about doing valve covers or perhaps a air filter assembly?

[awr68]

Tyler, how about a shallower glove box for us vintage air users?

All the parts look great!! :thumbsup:

[slenning]

Tyler, how about a shallower glove box for us vintage air users?:

I'll second that. Great idea:cheers:

[skatinjay27]

We had the chance to check out a 3rd gen Nova on Friday (thanks again Eric) to confirm our suspensions that our cowl panel from the 67-69 Camaro would fit the car flawlessly.

^^^^^^^^^lol
you know how we have that new vegas motto "your vegas is showing"
when i saw you typo that the first thing that poped into my head was "your ATS is showing"!!!!!!!!!!!!!!:lol:

i really like that closeout panel thought you guys gonna offer it in satin and what about just all fiberglass for those that would just want it the same color as the rest of thier engine bay? pricing?

when do we get to see a pic of the flat hood on your car:unibrow:

[69Nova]

Thats cool about the cowl panel fitting the Nova. Thats gonna look killer if you guys come out with a hood and deck lid. I have been trying to come up with a new look for my car and that would be perfect to have a c/f hood, cowl and trunk.

[Teetoe_Jones]

Here are some pics of the other 2nd gen parts we make. This one is a 73 Camaro and it currently has our Cf power bulge hood, nose piece, closeout panel, core support braces, decklid, rear spoiler, center dash, A pillars, and upper door panels.

http://i41.tinypic.com/2d8qtde.jpg

http://i39.tinypic.com/13yfo83.jpg

http://i41.tinypic.com/24xo0bb.jpg

http://i42.tinypic.com/347wk1j.jpg

Tyler

[buickfunnycar.com]

loving the upper door panels & A-pillars...:thumbsup:

[PonchoJohn]

Sooooo, how are them Firebird parts coming??!!!!