do i have to alter my rear seat?

[scottybuck 11]

im mini tubbing my 68 camaro.do i have to narrow my rear seat? how do i narrow it?

[simbad's68]

The seat does have to be narrowed. I'm looking at just using vette or gto seats.

[John510]

The seat does have to be narrowed. I'm looking at just using vette or gto seats.

vette rear seats?

[scottybuck 11]

i really dont understand that.a vette doesnt have a rear seat.:rolleyes:

[simbad's68]

If you look at project Prodigy, the C5/C6 seats were used for the front and back.


vette rear seats?

[scottybuck 11]

on my project im staying with stock interior and need to know how to narrow my rear seat an how much.

[awr68]

Scotty, it does need to be narrowed a little, but it's not really a big deal. The best thing to do is complete the mini-tub and then see what needs to be done to the seat frame...it's pretty obvious at that time. I don't think I have any pics of mine.

Might look at DSE's site at their projects pages for some pics.

[RECOVERY ROOM]

You just need to set the seat in place and look at the springs in the tub area,We have cut out and rebraced the frame and installed the covers,Can't even tell there is tubs behind it.Take the cover and foam off the frame and check it out.

[scottybuck 11]

thanks for the help guys.this is my first minitub project.

[Vegas69]

Mine wasn't narrowed either. The seat frame was clearanced for the tubs. Turned out nice.