hemirambob
03-30-2009, 11:49 AM
Gearing up to install this rear suspension in my 66 Coronet this weekend. Bill Reilly was really helpful and this will start me on my way to "g-machiness". I'll post pics as it goes.
http://www.reillymotorsports.com/store/product.php?productid=16175&cat=263&page=1
He's making these for the 66 - 67 B-bodies now too.
Power comes via a '75 400 BB punched .30 over with 440 Source h-beam rods, Keith Black flat tops at zero deck, balanced assembly, Edelbrock Performer RPM heads and intake, Holley 950, 1 7/8" headers, 3" exhaust into Flowmaster 40's, Mallory box, Unilite distributor and coil, built 727 trans all rollerized, narrowed Dana 60 with 4:10's.
Pleasure to be aboard
http://www.reillymotorsports.com/store/product.php?productid=16175&cat=263&page=1
He's making these for the 66 - 67 B-bodies now too.
Power comes via a '75 400 BB punched .30 over with 440 Source h-beam rods, Keith Black flat tops at zero deck, balanced assembly, Edelbrock Performer RPM heads and intake, Holley 950, 1 7/8" headers, 3" exhaust into Flowmaster 40's, Mallory box, Unilite distributor and coil, built 727 trans all rollerized, narrowed Dana 60 with 4:10's.
Pleasure to be aboard