Envy updates

[bigtyme1]

Been awhile since I posted so I thought I'd throw in a few picks. Things are coming along, but slow. out of my comferate Zone a little. Special thanks to ,Steve ( HRBS) ,Frank and Mike Redpath for the late night discussion.

Brake lines, exhause to the mufflers, trans cooler and I'm starting on the AC and hydroboost this week end.

Finally made a decision on wheels and Steve ( HRBS ) hooked me up with a nice set of BOZE, and yes I'm staying with the red Calapers for now.
Got some more great stuff from frank as always, Vintage air
Mike has been doing alot with me lately but I think it's top secret for now.

[bigtyme1]

Continued
Got some better picks outside but I need to figure out how to resize them

[camcojb]

very clean, looks great.

Jody

[brans72]

Looking good there man! oh that is a nice a/c set up from Frank huh? I just got mine like 2 weeks ago from him for my chevelle. Brandon

[ItDoRun]

Looks great! How's the ride height adjustability of the G-Link? How much adjustmnt is there?

[rjsjea]

Nice color......good view from the arse-end

[bigtyme1]

ok, I got some more up. Finally got the wife involved. Told her not to let go of the wrench or else. She hung in there pretty well.

[bigtyme1]

Looks great! How's the ride height adjustability of the G-Link? How much adjustmnt is there?

I haven't really done any adjustments yet, I'm waiting until I send it out for alignment .

[bigtyme1]

Looking good there man! oh that is a nice a/c set up from Frank huh? I just got mine like 2 weeks ago from him for my chevelle. Brandon

so far I only have the condencer and dryer in, but I did figure out the lines the come with the kit are pretty much useless to me. I'll have to make custom lines. The hard line are made for a factory replacement only. But as alway, somebody on here will help me figure it out for me :thumbsup:

[ProdigyCustoms]

Car is lookin good man. Clean job on that exhaust.

BTW about your signature.........................

"Will trade wife for parts"

She is pretty damn cute, you could have saved a fortune with us!

[bigtyme1]

I'm not done yet, and this won't be the last project!

Car is lookin good man. Clean job on that exhaust.

BTW about your signature.........................

"Will trade wife for parts"

She is pretty damn cute, you could have saved a fortune with us!

[WILWAXU]

Good work! Car is looking great!:thumbsup:

[awr68]

Looking great Mark!! Let's fire that thing up!! :thumbsup:

[HRBS]

Lookin good buddy. Man that rear tire looks even fatter on the car.
I agree with Frank.... had you shown a picture sooner, we could've done something ! :thumbsup:

[tones2SS]

Looking good.
The wheels look good.:thumbsup:

[70rs]

That car is VERY nice! I think the color and how you did the hockey stick looks perfect on that. What color will the top be? Interior color? And good choice on the wheel style/size too!

[brans72]

Hmmm I have seen the Corvette covers before :yes: looking sweet there shame they don't say Camaro yet! Glad they worked out for you!!!!!

[HRBS]

What color will the top be? Interior color?

Oh god please dont get him started on that. Mark wont have any hair left when we're done with him.

[70rs]

I hope I didn't open a can of worms that can't be shut! :_paranoid
So.....HRBS (Steve) do you have any idea about those colors?

[HRBS]

We're working on it (him) but ultimately its Marks decision.
I think he has the colors narrowed down to two, but its other parts of the interior I am worried about :_paranoid

[bigtyme1]

I hope I didn't open a can of worms that can't be shut! :_paranoid
So.....HRBS (Steve) do you have any idea about those colors?

The top will be green for sure, The rest is still in the air. Money is going to be the deciding factor.

[bigtyme1]

Hmmm I have seen the Corvette covers before :yes: looking sweet there shame they don't say Camaro yet! Glad they worked out for you!!!!!

Still working on them. but they do look good so far.

[comp-spec]

Nice Mark...looking good

[130fe]

Looking good Mark!!

[awr68]

Mark had Jennifer and I over last night for dinner and to check the car out. Dinner was great, thanks buddy and tell Shannon thanks again for us! :cheers:

We loved the Camaro! Very clean and tastfully done! I love the colors and parts choices! You nailed the stance too! It is very obvious you are taking your time and doing things right during both the early stages and final assembly. Give your self a big pat on the back my friend...you are doing a great job on the build!

Thanks again for having us over and for the ride back to the hotel!! :cheers:

[bigtyme1]

Thanks buddy, loved having you over. I'll get your picks up soon. forgot need batteries.

[camcojb]

Thanks buddy, loved having you over. I'll get your picks up soon. forgot need batteries.

since I am not familiar with PA, how far away is Elizabethtown? My best friend just moved back there to open a new warehouse. His 69 Camaro is here for me to assemble and then ship back to him, and he's hoping he can find some car guys to do stuff with.

Jody

[bigtyme1]

JODY, I think it's only about an hour from me.

[bigtyme1]

The first official Laterial G members to see my car. Thanks for all the kinds words. Next year maybe I can get you out hear for GM Carlsle.

[bigtyme1]

Heres a few more picks, took it to a buddys shop this morning to start the electric. Everybody is on 24 Hour call this week end.

[RECOVERY ROOM]

I still like the color of that car

[70rs]

The car is coming along great! So the next pics we see of Tony and Jennifer will be of them standing in front of thier car, painted and in thier own garage.
That's great that both cars are so close to being done. I can't wait to see the interior and top on yours Mark. Very nice build!:thumbsup:

[bigtyme1]

The car is coming along great! So the next pics we see of Tony and Jennifer will be of them standing in front of thier car, painted and in thier own garage.
That's great that both cars are so close to being done. I can't wait to see the interior and top on yours Mark. Very nice build!:thumbsup:

That makes two of us!

[fleetus macmullitz]

Very nice work, car looks great. :thumbsup:

[70rs]

I forgot to ask in my earlier post, what is that color called? I really like it.

[bigtyme1]

I forgot to ask in my earlier post, what is that color called? I really like it.

P6 2008 Ford Fussion Moss Green Metalic

[130fe]

Mark, what accessory drive is that one? Looking for ideas when I do the L92 swap this fall.

[jack67rs]

Great build! those colors look sweet. On your rendering the wheels inserts are a darker grey, did you change your mind or are you still workin on it? nice work, look forward to seeing more pics.

[blissbsm]

looks great mark. Cant wait until mine reaches the point of yours.

[bigtyme1]

Mark, what accessory drive is that one? Looking for ideas when I do the L92 swap this fall.

I used the March set up. I like it but to be honest the top of the motor is to busy. Next time I'll go with the AC on the bottom

[bigtyme1]

Great build! those colors look sweet. On your rendering the wheels inserts are a darker grey, did you change your mind or are you still workin on it? nice work, look forward to seeing more pics.

Me, change my mind Never! :willy:

[bigtyme1]

Just thought I would show some of the latest photo's. Took it out yesterday for a spin, Going down the road on an egg crate is a little scary. But every thing works great. Some Good News. Tracey ( Recovery Room ) will be taking care of the interior sometime after the first of the year. If everything goes according to plan. The first show should be Columbus.

The best thing about Tracey is he's really stay's in touch with me and guides me in the right direction. After working on this car for 5 years it's real easy to just go in the house and watch TV. But I keep going on.

[Vegas69]

Looking good man. Are you sure you have enough wattage? :unibrow:

[bigtyme1]

I like it loud! Still not sure about the amp configuration yet. I may hide them in the floor but I need to get air to them some how.


Looking good man. Are you sure you have enough wattage? :unibrow:

[bigtyme1]

Looking good man. Are you sure you have enough wattage? :unibrow:

I forgot to tell you, the shock plates worked out great. Thanks again.

[GregWeld]

Looking fabulous! And a DROP TOP!!


I have a buddy that spent 10 years building his 56 Belair... and let me tell you -- watching him drive that car now - it was worth every minute of the effort. He did it all in a two car garage... including the mile deep black paint. SO turn off that TV and stay out there!!

:bow: :bow:

[radrambler]

The car looks great.love the paint scheme.
congrats on tracy doing the interior...that should really top the car off.

:thumbsup:

tom

[awr68]

HEY! You didn't tell me about driving the car when we were on the phone yeasterday! Congrats buddy!! :woot: :thumbsup:

Car looks great! Man that audio stuff sure brings back a lot of good memories! FWIW, I have used CPU fans to push and pull air over amps in semi-sealed enclosures and it works very well! I just wired them up to the remote amp turn on wire (usually blue).

[130fe]

Looks good Mark!

[tones2SS]

The car looks great.love the paint scheme

I agree. Looks good. I like the size of the stripes on there.:thumbsup:

[Vegas69]

I forgot to tell you, the shock plates worked out great. Thanks again.

Anytime....:cheers:

[Musclerodz]

Looks good from here!

[XcYZ]

Looks great, Mark! Those colors work great together. More please. :D

[98ssnova]

Looking good Mark glad to see you got her running how did the new guaages work out I would like to see them bud.

[bigtyme1]

They worked out good so far. The only think I don't like is the box that is connected to the speedometer to program .

Looking good Mark glad to see you got her running how did the new guaages work out I would like to see them bud.

[98ssnova]

They worked out good so far. The only think I don't like is the box that is connected to the speedometer to program .

Really what is the problem with it... not calibrating correctly or something?

[bigtyme1]

Well I know I'm a little behind in the updates but I find myself real busy over the last couple of months. I need to thank Bill Amsley for lending me his mold for the convertible top cover. turned out pretty good for the first time I did it. There should be lots of updates this week so stay tuned. Due to weather the interior has been delayed a little to Tracy has been walking me though some things I could do in the mean time. We got the Marquez Dash but Tracy will be putting his special touch to it.

Lets start with the weather that has held everything up.

[bigtyme1]

here is the mold from Bill Amsley for the convertible cover.

[GregWeld]

Looks like you had the wife and kids out there shoveling!

It's so pretty... Are you hoping it last a few more weeks? :rofl:

[bigtyme1]

Had some more extra time so I decided to make a amp rack for the trunk

[Vegas69]

I wore shorts today.....:rofl: Good stuff, are you planning to lease the car out for concerts? I guess you need some serious tunes in a vert. :thumbsup:

[bigtyme1]

Time is costing me money, when I say that I mean the longer the car stays hear the more I change my mind. so hear is the new shifter. I decided to go with the master shifter with Steve's ( Twistmachine) paddles. I cound find a shifter that met my needs, once I found out Steve and mastershift was working togethor I was sold.

[bigtyme1]

Then came the dash, Chris at Marquez really worked with me on this. it turned out pretty nice and I can't wate until Tracey gets done with it.

[bigtyme1]

Here are some of the latest shots of the whole car. More to come soon.

[bigtyme1]

Hey Todd, found the problem with the trans!!:wow:

[bigtyme1]

I wore shorts today.....:rofl: Good stuff, are you planning to lease the car out for concerts? I guess you need some serious tunes in a vert. :thumbsup:

Play anything, just play it load:thumbsup:

[bigtyme1]

Looks like you had the wife and kids out there shoveling!

It's so pretty... Are you hoping it last a few more weeks? :rofl:

yea, I'm to busy working on the car :lol:

[Vegas69]

Damn, that interior is going to be trick. Was the fitting cross threaded?

[bigtyme1]

Damn, that interior is going to be trick. Was the fitting cross threaded?

no it was a fitting failer I think, it came apart where it was sealed from the factory.

[bentfab]

Hey Todd, found the problem with the trans!!:wow:

So it wasn't the transmission?

[bigtyme1]

So it wasn't the transmission?

the threads in the trans seam to be fine.

[tones2SS]

Sharp looking car.
The interior looks very nice.:thumbsup:

[mdprovee]

It's getting better and better

[Matt@BOS]

It's getting better and better

Agreed. I think you chose a great color scheme for the type of car you have in mind. I Can't wait to see what you and Tracy have in store for the interior.
BTW, how did you mount the gauges behind the Marquez piece? Looks like a fair amount of thought had to go into it, they look like the same ones I've got which have a curved face.

Matt

[bigtyme1]

Matt, they are the same gauges you have. all I had to do is grind away about a 1/8 in off the back piece of the gauge cluster. I was able mount them from behind and still use the curved glass and Marquez rings on the out side. Marquez did a great job on the cluster and I really wanted to use there rings. I also polished the rings. The center gauge I had to make up myself using some parts from Classic instruments and the gauge from mastershift.

[DOOM]

Mark.... WOW!! Thats all I can say!!LOVE LOVE LOVE LOVE The cluster great job!!:wow: :cheers:

[98ssnova]

Mark is it just the pic's or does your radio not look to be in the optimal place looks like it would be hard to see?

[tmadden]

Then came the dash, Chris at Marquez really worked with me on this. it turned out pretty nice and I can't wate until Tracey gets done with it.

Man that steering wheel is hot

[bigtyme1]

Mark is it just the pic's or does your radio not look to be in the optimal place looks like it would be hard to see?

it's got a tilted face but the plan will be changed once Tracey gets the car.

[69-X44]

Looks good Mark! Nice job in the last year since i got the rotissorie from you. Keep the updates coming.

[bigtyme1]

Looks good Mark! Nice job in the last year since i got the rotissorie from you. Keep the updates coming.

How is your car coming along? you got it on the rotissorie yet?

[waynieZ]

Wow awesome job on the gauge setup. The whole car looks great nice work.

[RickM415]

looking real good,

[Spiffav8]

:wow: Daaang brother...you've got it going on over there!

Gotta give ya :thumbsup: :thumbsup:

[69-X44]

How is your car coming along? you got it on the rotissorie yet?

Not yet. Still getting the new house and garage in order. I've been getting small parts done in the meantime. The shed will be done in the spring so the garage will be empty and available for the car. I have been following some leads in selling my NOS sheetmetal but nothing has materialized.

[awr68]

Looking great Mark! Lots of work done since I was there!! :thumbsup: :cheers:

[Blake Foster]

Car is looking awesome!!! looks like you will be driving it this spring. YEAAA!!

[bigtyme1]

I got my Fesler back up lights this week, and they turned out great. as far as I know Fesler is the first to put these out so far and I have been asking for a few years now. I offered to work with Amy and Chris on the fitting because they did not have a real RS in the area and I really want a set for Envy. My buddy Scott Spicer had a real RS in his shop so we used it for fitmit. We got them to a point where they are a direct bolt on. took about 15 minutes to install. Another great product from Fesler. Thanks Chris.

[tones2SS]

Looks awesome. Chris and his crew are awesome at what they do.:thumbsup:

[Hdesign]

Looking great Mark! Can't wait to see it done! :thumbsup:

[awr68]

Nice lights...I know they have been in the works for a while! Nice to see them on the car!! :thumbsup:

[bigtyme1]

Looking great Mark! Can't wait to see it done! :thumbsup:

That makes 2 of us, The snow is killing me.

[RECOVERY ROOM]

Guess who's coming to dinner!:D

[HRBS]

you better up the minutes on your cell phone plan ! :rofl:

[bigtyme1]

What's for Dinner? Be there around Monday. We got all the way up front so there's no unloading until it gets there. Take some picks of the off load please.

[bigtyme1]

Some final picks before the tranformation begins.

[bigtyme1]

you better up the minutes on your cell phone plan ! :rofl:

Nerves of steel buddy, :willy: keep you eye out for a black truck and white trailer please:lol:

[HRBS]

on a serious note...... the car looks great Mark !

[awr68]

Very cool! I'm real happy for you Mark!!

[tones2SS]

That looks good Mark.:thumbsup:

[bigtyme1]

ok, know that Tracy has the car I need to think of some ideas for the engine compartment. I need to get rid of the fuel rail covers but I can't get nice valve cover yet, I still have the old perimeter heads and there's not to many options out there got any idea's ? Also learing how to use Photo Bucket.
http://i941.photobucket.com/albums/ad251/bigtyme1/envy/camaro2193.jpg

[bigtyme1]

I may just go with this idea, I like and it's very clean. Saw this car in tacoma goodguys a few years back. I'm also thinking about the anvil filler panel for the core support. May radiator is ruff looking so either I polish it or paint the top to match.
http://i941.photobucket.com/albums/ad251/bigtyme1/envy/covers.jpg

[70rs]

The Anvil radiator cover is a great looking piece. And thos custom covers look really good too.

Is there not any options for better looking valve covers for your heads? I am not familiar with what is out there.

[Spiffav8]

Mark...you know me. I always say less is more and I like a simple clean look. Your car is awesome and honestly I can only think of one thing that I think would look good. How about a closeout panel? Here's a picture I borrowed from DSE. Just a thought...it will look amazing regardless.

:thumbsup:

http://i153.photobucket.com/albums/s222/spiffav8/james-247L.jpg

[RECOVERY ROOM]

After looking this car over I can say I'm very impressed with the quality work done to it,Mark built a car as nice as most pro built cars.:thumbsup: :thumbsup:

[HRBS]

time to throw out his hats....
that head just grew 2 sizes ! :P

[Race Wilson]

Man that steering wheel is hot

I really like that wheel, also. Does anyone know the make and model?:question:

[Vegas69]

After looking this car over I can say I'm very impressed with the quality work done to it,Mark built a car as nice as most pro built cars.:thumbsup: :thumbsup:

Proud of him, he hit it out of the park. Not many weekend warriors with half that talent.

[RECOVERY ROOM]

time to throw out his hats....
that head just grew 2 sizes ! :P
We will just tell him it's ok...kinda of

[Musclerodz]

I really like that wheel, also. Does anyone know the make and model?:question:

It is an Isotta, italian made. They also make the wheel for Flaming River called Waterfall.

[bigtyme1]

Thanks tracey, I tried as hard as possible to make a perfect car. I still don't think it holds up to a lot of guys out there but I did it as a challenge to myself. Looking back I would have done more and made a few changes. But it's now time to drive it. I'm sure once You get done with it, it will be over the top.

Yes, the wheel is Isotta, I like the feel but it's a little to small to see all the gauges as your driving it, but will get used to it. Or maybe I'll change my mind. Emagine that!

Todd, Thanks bud, coming from an onwer of a pro built that means alot.

Steve, You need to take a little credit on this as well. There will be alot of people to thank when this is all done.

[bigtyme1]

Mark...you know me. I always say less is more and I like a simple clean look. Your car is awesome and honestly I can only think of one thing that I think would look good. How about a closeout panel? Here's a picture I borrowed from DSE. Just a thought...it will look amazing regardless.

:thumbsup:

http://i153.photobucket.com/albums/s222/spiffav8/james-247L.jpg

Called DSE today, nothing in the works for customers yet. I'm leaning towards the Anvil once I figure out how to modify it a little.

[RECOVERY ROOM]

Look at what I got......
http://i338.photobucket.com/albums/n404/RECOVERYROOM1/IMG_3978.jpg

[GregWeld]

Tracy --- Is that for you??!! Or a job??!!

[GregWeld]

OKAY --- I'M STUPID --- NOW I'm making the connection! MARK!! DUDE!!!

FINALLY!!

EEEEEEEEEEEEEHHHHHHHHHHAAAAAAAAAAAAAAAAAA
:woot:

[98ssnova]

OKAY --- I'M STUPID --- NOW I'm making the connection! MARK!! DUDE!!!

FINALLY!!

EEEEEEEEEEEEEHHHHHHHHHHAAAAAAAAAAAAAAAAAA
:woot:

I hope Todd dont see this for your sake Greg:rofl:

Mark get the anvil piece and put your project name on it and paint the rest to match the car

[cluxford]

I may just go with this idea, I like and it's very clean. Saw this car in tacoma goodguys a few years back. I'm also thinking about the anvil filler panel for the core support. May radiator is ruff looking so either I polish it or paint the top to match.
http://i941.photobucket.com/albums/ad251/bigtyme1/envy/covers.jpg

Love the clean look also. Something to think about, not for everyone, but maybe to consider. I'm doing this to my engine bay. Here's the catch. It's a one piece removable. Will have a close out panel over front just not mocked up yet.

Car will keep standard inner guards. This one piece internal will be bolted in and will be easily removed without damage to anything.

http://i156.photobucket.com/albums/t37/cluxford/SDC10472.jpg

[Matt@BOS]

Mark, does your core support have all the factory holes in it, or did you fill them up? For me, the deciding factor when choosing closeout panels was which one covered up the most so that people wouldn't be able to see the myriad holes punched into it.

Looks really good! Be sure to post up progress on the interior as it comes together.

Matt

[bigtyme1]

Mark, does your core support have all the factory holes in it, or did you fill them up? For me, the deciding factor when choosing closeout panels was which one covered up the most so that people wouldn't be able to see the myriad holes punched into it.

Looks really good! Be sure to post up progress on the interior as it comes together.

Matt

No I never filled the factory holes, my original plan was to get the DSE filler panel but after Mike made the resevors for me I did not want to cover them up. I have a filler panel from undercover I may use for now. I need to see the Anvil piece up close before I spend the money.

[bigtyme1]

Look at what I got......
http://i338.photobucket.com/albums/n404/RECOVERYROOM1/IMG_3978.jpg

You just had to do that to me!
Tracey is in charge of all the pictures for the interior and as you can see he likes to tease me. After the 1:30 am confersations this week I can tell you it will be more then I hoped for. Tracey has basically turned this into his personal project as always.

[RECOVERY ROOM]

Greg ,I work on so many Camaro's anymore that they feel like there mine...lol.( I just posted that pic for my online auction for parts to the highest bidder):unibrow:

[GregWeld]

Yep -- just another belly button car... everybody's got one! :rofl:

Owning a "tri five" chevy is the same thing... every other garage on the block has one.

When someone says that to me -- I just laugh and ask them if they know why that is..... "Because everybody loves 'em - that's why". Can't argue that.

[awr68]

I want to see the material that will be used on the top........................:unibrow:

Mark, I think the tires are dirty! j/k! The car looks stunning! :cheers:

[HRBS]

I want to see the material that will be used on the top

I over heard some talk about using wicker..... :_paranoid

[bigtyme1]

Wicker? Maybe red to match the brakes. Tracey is working out the final details on the top this week so if all goes well. Color has still not been decided yet. But it will be top line material.

[awr68]

Color has still not been decided yet. But it will be top line material.

My vote is for gold to match the interior! :D

[GregWeld]

I know one thing -- I've collected a whole folder of Recovery Room interiors... and I can say that there isn't a single one of them that I don't like... they're all just killer...

Must be the Nebraska corn?

:rofl:

[98ssnova]

how about a two tone to match the paint with red stich to match the brakes and then you have tied it all in:wow: . And i still cant wait to see what the changes to dash will be.:D

[RECOVERY ROOM]

I know one thing -- I've collected a whole folder of Recovery Room interiors... and I can say that there isn't a single one of them that I don't like... they're all just killer...

Must be the Nebraska corn?

:rofl:

You should see the first one I did........yuk:lol:

[Blake Foster]

I know one thing -- I've collected a whole folder of Recovery Room interiors... and I can say that there isn't a single one of them that I don't like... they're all just killer...

Must be the Nebraska corn?

:rofl:

I doubt it has ANYTHING to do with the CORN!

:rofl:

[bigtyme1]

Tracey, As we were going over the design today I forgot to mention one more thing I wanted to add. no big deal, we may just have to make the console a little wider then normal. When I saw this I thought the color was perfect for are sceam.


http://i941.photobucket.com/albums/ad251/bigtyme1/envy/Envy/Green-wash-basin.jpg

[RECOVERY ROOM]

:rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl: ............(that's going in the trunk)

[HRBS]

Tracy sent me a sneak peek and I promised I wouldnt post it.
He really wanted to surprise you Mark.
But I just cant help myself....

http://i241.photobucket.com/albums/ff143/hrbs/upholstery.jpg

[bigtyme1]

Tracey really out did himself this time, I'm so proud:rofl:
SEMA is going to love it!

[awr68]

Tracey told me the orange would look great against the green...I didn't believe him...but it's true, the colors do 'work'!! :lol:

[RECOVERY ROOM]

Damn Steve, I told you not to show anyone....:unibrow:

[bigtyme1]

Hold on guys Looks like Good Guys is out but it will be worth it.

[GregWeld]

Come on Mark -- it's almost a month since any new posts... you're killin' us!
:D

[DOOM]

Come on Mark -- it's almost a month since any new posts... you're killin' us!
:D

X2 ^^^^^^^^^^^^^^^^^^^^

[Blake Foster]

Yep Post them up!!

it's not like we are the only ones going to Sema you know

[bigtyme1]

Its all in Traceys hands now,trust me I don't have a clue of what it looks like either. all I know is he started with a few cows In the back yard and there not quite big enough yet .:willy:

[XLexusTech]

Then came the dash, Chris at Marquez really worked with me on this. it turned out pretty nice and I can't wate until Tracey gets done with it.

What no IPAD..... JK


Nice :thumbsup:

[prostreet69cama]

Yes I would like to see pictures of the interior too. Dash turned out nice. Are you gonna paint it or put leather on it?

We used the soft feel paint from PPG. It is awesome. Feels like rubber and matches the leather. Well the color is base coat matched to the leather.

Car looks real nice.

http://i268.photobucket.com/albums/jj16/prostreet69camaro/Marks%2069%20Camaro%20Finished/DSC03252.jpg

[waynieZ]

They make a sweet looking dash.

[bigtyme1]

I like what you did with the Vin, looks good. My dash will be covered with leather. Will see some pictures soon. The artist is still working on it.:bow:
http://i268.photobucket.com/albums/jj16/prostreet69camaro/Marks%2069%20Camaro%20Finished/DSC03228.jpg

[bigtyme1]

Sunday, Sunday,Sunday!

[dmc69]

please post pics asap!:thumbsup:

[RECOVERY ROOM]

I'm working on loading to "Bucket" and resizing them the same. I think there is at least 100 so far, Then I will back track to the beginning for a start to finish.

[bigtyme1]

Oh sure just take your time, I got all night:willy: :willy: :willy: :willy:

[HRBS]

I'm working on loading to "Bucket" and resizing them the same. I think there is at least 100 so far, Then I will back track to the beginning for a start to finish.

Giddy up Cowboy !

[GregWeld]

I'm working on loading to "Bucket" and resizing them the same. I think there is at least 100 so far, Then I will back track to the beginning for a start to finish.

Oh yeah -- that whole "select" - click on the "load 'em up" button - and wait 2 minutes really wears me out too!

:woot:

[byndbad914]

slight hijack - is this the car I just saw Sunday in Longmont CO at the ColoRODans show? If so, that interior turned out really nice - my buddy is building a PT 68 convertible for a guy and I was using your interior as an example of a nice setup, especially the back seat area :thumbsup:
Yes I would like to see pictures of the interior too. Dash turned out nice. Are you gonna paint it or put leather on it?

We used the soft feel paint from PPG. It is awesome. Feels like rubber and matches the leather. Well the color is base coat matched to the leather.

Car looks real nice.

http://i268.photobucket.com/albums/jj16/prostreet69camaro/Marks%2069%20Camaro%20Finished/DSC03252.jpg

[Vegas69]

Is this the tease of the year?

[RECOVERY ROOM]

Marty gets that title,I'm getting to it:lol:

[HRBS]

Is this the tease of the year?

You aint kidding. It reminds me of the time I made a hotel reservation for a show and flirted with the cute sounding girl on the phone only to find out at check in months later she weighed as much as my truck and trailer combined.
This better be good Tracy. LOL :thumbsup:

[RECOVERY ROOM]

I'm not teasing, I'm just hate messing with posting pics:lol: It took two years to start a thread on the interior section after I paid my sponsor fee.

[bigtyme1]

You aint kidding. It reminds me of the time I made a hotel reservation for a show and flirted with the cute sounding girl on the phone only to find out at check in months later she weighed as much as my truck and trailer combined.
This better be good Tracy. LOL :thumbsup:

I think I dated that Girl!!

[96z28ss]

:ttiwop:

no photos exist! do they? This is all an illusion. Its a post to see how many of us fall for it.

[RECOVERY ROOM]

The truth is I lost the memory cards that I have been using for the car, I found them with the kids camera crap and now we will start at the beginning, The weather really screwed us in getting the car here when we planned, So we just waited till it was possible, I worked on the cars that made their time slots to keep them moving thru and worked on Marks car in between them and on Saturdays. I had a guy push his car back because they were behind on it so I jumped on the Camaro and started planning with Mark. After alot of discussion we came up with a look and colors that he liked and added some better parts also. (This also gave Mark a chance to dig up some coffee cans in the back yard:rofl: ) I like the direction it headed in because it won't look like a race car or it was built with an Erector set.... The pictures he was sending me of modern cars he liked work really well with this car. I don't think there is room for anymore components, Bad ass stereo,I phone,USB,storage areas, L E D
lighting for soft lighting, Euro beechwood accents,Polished and brushed trim accents. He found some air vents that are really cool looking. It has been fun talking with him and going back and forth with ideas. I will put up some pictures from the beginning when we ripped it apart and go from there

[RECOVERY ROOM]

We stripped it apart
http://i338.photobucket.com/albums/n404/RECOVERYROOM1/IMG_4751.jpg
flatten out the floors,And no you won't even lose room.... 1/2 inch at most, Makes the carpet lay flat without bumps, I use pour foam to seal and fill the voids then we dynamat over aluminum blocks heat and sound, I will load more pics of that step later
http://i338.photobucket.com/albums/n404/RECOVERYROOM1/IMG_4744.jpg
http://i338.photobucket.com/albums/n404/RECOVERYROOM1/IMG_4735.jpg
Trunk area, You can never have enuf sound:thumbsup:
http://i338.photobucket.com/albums/n404/RECOVERYROOM1/IMG_4750.jpg
http://i338.photobucket.com/albums/n404/RECOVERYROOM1/IMG_4272.jpg
I am loading more detail pics later and will start showing the pretty pics when I get them in order

[awr68]

All right, pics!! :woot:

Looks great...I really like the amp rack!! :thumbsup:

[tones2SS]

All right, pics!! :woot:

Looks great...I really like the amp rack!! :thumbsup:

Very nice. What Tony said here.:thumbsup:

[Nick.V70]

Man this is a very nice build:thumbsup:

Nice to talk to you today over the phone Mark, it is a small world:cheers:

[bigtyme1]

Thanks Nick, More to come soon. I just got off the phone with Tracy. This is why I'm working on the truck Got a long drive out west to pick it up.

[bigtyme1]

Heres just a quick example of the trunk. Tracy will show some more details on his interior post, I build the amp rack and a filler panel prior to shipping the car out but he was able to put in some vents and hidden fans to cool the amps. Tracey also took my filler panel and made it more 3 D to show off the dept. Extreme lighting was used to comunicate with other planets as well. More to come. Tracey Made most of the panels out of Aluminum to keep down the wieght and keep the curves that flow with the rest of the interior.

[Lenie]

Excellent outcome Mark, it's nice knowing after you've put all that work into it, you've picked the right guy to finish the interior off. Looks great Tracy.

[boonedog]

probably over looked it but whats the name of the paint?

[awr68]

Very nice work! I'm almost as excited as Mark to see the final product....and that's darn excited!!! :yes:

[bulldog19]

Looking really nice Mark!! When i last spoke to you you were undecided whether 1 or 2 subwoofers in the trunk? Tracy what protects the amps in the floor clear lexan? Amazing work.

[awr68]

http://www.lateral-g.net/forums/showthread.php4?t=28330

[bigtyme1]

As this builds finally comes to an end I just wanted to take a little time to tell my story and show some appreciation for allot of fellow members that have helped all of us out. Since the start of this build during the past seven years I have had twins, built a new garage, remolded the house and even brushed with death recently. I have met hundreds of new friends and have acquired some of the best possible help from the professionals in the business. I been welcomed into their houses and invited them to mine. Not only have I gotten pretty much 100% of my parts from Lateral G and Pro-Touring Members but I have had some very late night conversations 7 days a week on Building techniques, best parts to fit my build and where to get the best steak when I’m traveling around the country. I built this car with no sponsors but I still wanted to show off all the help that was given to me. Ben and I came up with a way to show off the car and thank most of the people that helped me out. None of these sponsors were charged a dime to be on this shirt. It’s my gift to them, you may also notice there are some sponsors that I did not use their parts, but their friendship has become greater than the build.
We are approaching the end of the build and it will soon hit the public completed. Please enjoy the shirts and show off are fellow Friends and Sponsors. It can only help them as they have helped all of us. I’ll be the first to admit, I’d be lost without them.
Thanks
Mark, AKA Bigtyme1
Sizes are M L XL 20.00 plus shipping, XXL AND XXXL are $25.00 plus shipping, Shipping is 5.00 pretty much anywhere, if it’s more I’ll take care of it. These are top line Hanes preshrunk shirts, very durable and long lasting. Shirts will be availible for shipping 9/18, I will ship out once a week.

Please follow link to order shirts http://projectenvy.bigcartel.com/
http://i941.photobucket.com/albums/ad251/bigtyme1/envy/Envy/MARK_SHIRT_WEB.jpg

[ProdigyCustoms]

Shirt looks great. We are proud to be on there, you have done a amazing job. And Michael will never forget flying in like the celebrity car builder to help, LOL! Glad to help, cannot wait to see it!

You talk about the camaraderie. I could not agree more, I sometimes feel like that country song, "I am so much cooler online" because I sure have more internet friends then friends around the corner. Love ya man, see ya in Vegas!

[HRBS]

Well put.
I remember all the late night conversations we had like it was yesterday. The car has truely been the centerpiece of our new found friendship and I am certain we will remain friends well after the build. You did a great job on the car Mark and should be proud. HRBS is honored to have been able to help with both parts and advice and I am thankfull I have the privilege of calling you "friend" !:thumbsup:

[awr68]

Shirt came out great guys! Thanks for having me on it! As you know, I value our friendship and am very honored to have been able to help with the build....and thanks for having us over for dinner when we did the East Coast tour!! Good times! See ya soon buddy!! :cheers:

Hey guys, You should know that Mark is hoping to sell quite a few shirts to help with the major expense to get his car to SEMA this year. He can get it into SEMA...but he has to get it there and home on his own dime....and that costs a lot due to the fact that he lives on the east coast! So do what you can to help a brother out!! Thanks!! :lateral:

[tones2SS]

Very cool Mark. That was a great idea with the shirts. They look great. :thumbsup: :cheers:

[fleetus macmullitz]

Very cool Mark. That was a great idea with the shirts. They look great. :thumbsup: :cheers:

X2 Mark. :thumbsup:

[bigtyme1]

X2 Mark. :thumbsup:

THANKS Please follow link to order shirts http://projectenvy.bigcartel.com/ First time I ever done this so I hope it works.

[Musclerodz]

Shirts look great Mark, glad to be of help along the way.

[bentfab]

Awesome Mark !!! Shirt is killer

It was always a pleasure to help you. Thanks for giving me the opportunity to help you on all your needs and questions. Wish you didn't live so close :rofl: I would take you out for a bite to eat. Thanks again for the support.

[bigtyme1]

Awesome Mark !!! Shirt is killer

It was always a pleasure to help you. Thanks for giving me the opportunity to help you on all your needs and questions. Wish you didn't live so close :rofl: I would take you out for a bite to eat. Thanks again for the support.

I hope we can meet up in vegas. Thanks for the order

[bigtyme1]

Still working on some pictures but I wanted to share this one with you. Shannon from Modo Innovations made me a dead pedal along with all the other pedels to match.

[tones2SS]

Looks awesome Mark!:thumbsup:

[Vegas69]

Whoopy... How about a photo of the inside of the glove box next.:D

[bigtyme1]

Whoopy... How about a photo of the inside of the glove box next.:D

I'll get some good ones up this week end. Been coming home and going straight to bed. Its getting dark earlier this time of year.

[awr68]

You're just old! :P

Nice carpet!

[Nick.V70]

As this builds finally comes to an end I just wanted to take a little time to tell my story and show some appreciation for allot of fellow members that have helped all of us out. Since the start of this build during the past seven years I have had twins, built a new garage, remolded the house and even brushed with death recently. I have met hundreds of new friends and have acquired some of the best possible help from the professionals in the business. I been welcomed into their houses and invited them to mine. Not only have I gotten pretty much 100% of my parts from Lateral G and Pro-Touring Members but I have had some very late night conversations 7 days a week on Building techniques, best parts to fit my build and where to get the best steak when I’m traveling around the country. I built this car with no sponsors but I still wanted to show off all the help that was given to me. Ben and I came up with a way to show off the car and thank most of the people that helped me out. None of these sponsors were charged a dime to be on this shirt. It’s my gift to them, you may also notice there are some sponsors that I did not use their parts, but their friendship has become greater than the build.
We are approaching the end of the build and it will soon hit the public completed. Please enjoy the shirts and show off are fellow Friends and Sponsors. It can only help them as they have helped all of us. I’ll be the first to admit, I’d be lost without them.
Thanks


Mark the way you just put all that said really sums up what I see this sport/hobby is all about. I am drawn to these sites for the same reasons you talk about and I am really happy you are able to have this car going so far to the top of the chain to have it in SEMA. Can't wait to see the car and meet you first hand:cheers: Well said!!:bow:


Oh and congrats on the twins:thumbsup:

[frankv11]

wow that UHHHHHHHHHH speechless. beautiful

love the 1st pic of the rear crisp lines.

[bigtyme1]

Thanks Nick, unfortunately SEMA looks like a no go this year. I'm out of money and sponsors are tight on money this year. I will get some good picks up soon were trying to work out all the details.

[ProdigyCustoms]

Thanks Nick, unfortunately SEMA looks like a no go this year. I'm out of money and sponsors are tight on money this year. I will get some good picks up soon were trying to work out all the details.

I know this is a big bucket list item for you. I know you kinda had your heart set on it. But you ain't missin nothing. To be honest I found my first SEMA experience quite disappointing. I had no aspirations or fantasys of any big awards or anything, I was not disappointed that way. But had a true "that was it" feeling about the middle of the second day. Now the fact that I am in the business there were some benefits that came with 5 years in a row of sometimes 3 cars there. But I tell people all the time, if you ARE NOT in the business, it is about the worst show you could take your car to.

It is all about ego if your not directly in the business and there is plenty of other opportunities to show it to the world (like pictures here would be a good start, LOL).

I am not taking anything this year and I could not be more excited. Larry got a call from someone wanting MotiV8tr (would be 3 years in a row) and I talked him out of it. I am just thrilled to have no responsibilities this year. Those that have shown there will understand.

Fly out and have a good time, and bring pictures.

[ccracin]

Mark,

I have been meaning to post how awesome the car has turned out. Being a PA guy as well, I have to get out to see this thing. Very Very nice. Oh, a question. How are you handling shifting the car? I see the paddles, but I mean how are you doing the park, reverse, drive thing? Did I miss a shifter in the console pics? Again, very nice!

[bigtyme1]

Mark,

I have been meaning to post how awesome the car has turned out. Being a PA guy as well, I have to get out to see this thing. Very Very nice. Oh, a question. How are you handling shifting the car? I see the paddles, but I mean how are you doing the park, reverse, drive thing? Did I miss a shifter in the console pics? Again, very nice!

Chad, everything is done by the paddles. It's called a master shift that is located in the trunk of the car That paddle tell the computer in the trunk to mechanicaly move a cable that is connected to the trans. It works well but I still need to dial it in. Going from R to D can be tricky and from 1 to 2. once I'm in second it works great. Will get it dialed in before spring.

http://i941.photobucket.com/albums/ad251/bigtyme1/shifter006.jpg
http://i941.photobucket.com/albums/ad251/bigtyme1/shifter003.jpg

[ccracin]

Chad, everything is done by the paddles. It's called a master shift that is located in the trunk of the car That paddle tell the computer in the trunk to mechanicaly move a cable that is connected to the trans. It works well but I still need to dial it in. Going from R to D can be tricky and from 1 to 2. once I'm in second it works great. Will get it dialed in before spring.

http://i941.photobucket.com/albums/ad251/bigtyme1/shifter006.jpg
http://i941.photobucket.com/albums/ad251/bigtyme1/shifter003.jpg

Thanks Mark. Please update us when you get things dialed in. I'm very curious as to how this works. I like the look of your console with no shifter. :thumbsup:

[awr68]

That's pretty slick Mark! Man you have a lot of electronic goodies in there...do you have auto pilot too? ;)

[lhkustoms]

That's pretty slick Mark! Man you have a lot of electronic goodies in there...do you have auto pilot too? ;)

He probably does...... but that takes all the fun out. :D

[tones2SS]

Nice looking set-up. Very clean looking.:thumbsup:

[waynieZ]

Nice Thats a slick set up.

[bigtyme1]

Last week I thought I'd try out my wifes new Camera. Wanted to get some good shots before the snow hits. Monday it goes to the dino for some tune work. Then will start perfecting some stuff over the winter months. Need to finish the engine compartment and a few other things.

http://i941.photobucket.com/albums/ad251/bigtyme1/Envy1020-1.jpg
http://i941.photobucket.com/albums/ad251/bigtyme1/Envy1022.jpg
http://i941.photobucket.com/albums/ad251/bigtyme1/Envy1033.jpg
http://i941.photobucket.com/albums/ad251/bigtyme1/Envy1135.jpg
http://i941.photobucket.com/albums/ad251/bigtyme1/Envy1154.jpg
http://i941.photobucket.com/albums/ad251/bigtyme1/Envy1149.jpg
http://i941.photobucket.com/albums/ad251/bigtyme1/Envy1161.jpg
http://i941.photobucket.com/albums/ad251/bigtyme1/Envy1172.jpg
http://i941.photobucket.com/albums/ad251/bigtyme1/Envy1013.jpg
http://i941.photobucket.com/albums/ad251/bigtyme1/Envy1145.jpg

[syborg tt]

WOW - over the top

I bet you can't wait to take it out and cruise in that beast.

[tazzz2_ca]

Now that is one fantastic looking car,,, congratulations on a beautiful build.

[bigtyme1]

I have about 250 miles so far, just not to far from home yet.
http://i941.photobucket.com/albums/ad251/bigtyme1/Envy1157.jpg

http://i941.photobucket.com/albums/ad251/bigtyme1/Envy1159.jpg

http://i941.photobucket.com/albums/ad251/bigtyme1/Envy1155.jpg

http://i941.photobucket.com/albums/ad251/bigtyme1/Envy1032.jpg

[camcojb]

car turned out great Mark. :thumbsup:

Jody

[mexMan]

Awesome! But only one question: how does the top go up with that hump on the back?

[GregWeld]

Killer car buddy....

Don't quite your day job and try to go into photography... but ya did okay! Great "subject" - so that helped ya out. :rofl: :woot:

[awr68]

Wonderful job on the car Mark! It looks fantastic! :thumbsup:

Also, the trees and all the fall colors looks awesome! I love that part of the country and your house/shop/land are really something to be proud of!! :cheers:

[Spiffav8]

Mark,

It's been great watching the your build. The end result is simply awesome. It's sure to be a lot of fun for years to come.

:thumbsup: :thumbsup:

[Stuart Adams]

Very cool. Congrats. Sure is striking.

[MODO Innovations]

Mark the car turned out great, congratulations on a job well done.:cheers:

[RECOVERY ROOM]

Awesome! But only one question: how does the top go up with that hump on the back?

You lift it off......

[Vegas69]

She turned out sweet Mark. That photo with the barn and the countryside is a great shot.

[Matt@BOS]

Car turned out great Mark! you definitely nailed the look that you were going after. It is, without a doubt, one of the classiest looking Camaros I've ever seen.

Matt

[Lenie]

Mark, the car's a beaut. Everything looks good, great choice in going with Tracy at Recovery. Wheels are the perfect fit. Man thats gotta feel good.

[mexMan]

You lift it off......

wait... what?

[HRBS]

Not bad for being built in a barn by a hillbilly from PA ! :thumbsup:

[bigtyme1]

wait... what?

It goes under the weld lip around the back of the car and screws on at the sides of the seats. It's really adds a nice touch but it's for sunny days only. I won't fit in the trunk.

[tones2SS]

Nice looking car Mark. She came out great. Enjoy that bad boy.:thumbsup:

[mexMan]

It goes under the weld lip around the back of the car and screws on at the sides of the seats. It's really adds a nice touch but it's for sunny days only. I won't fit in the trunk.

Ohh okay.

I LOVE IT! It makes me envy :p

[skatinjay27]

holy moly! lol the car is STUNNING mark ! great job!

[Flash68]

Wow what a car. Congrats and now enjoy!

[bigtyme1]

Mark, the car's a beaut. Everything looks good, great choice in going with Tracy at Recovery. Wheels are the perfect fit. Man thats gotta feel good.

Can't go wrong with Tracey, Just one more good friend to add to the list.:cheers:

[Musclerodz]

Looks great Mark, just don't take it too far apart, or you know what happens next.

[waynieZ]

The car looks great. The interior is awesome. I love it.

[DOOM]

So this car does exist.......:D

[bigtyme1]

So this car does exist.......:D

You could have been the first to see it, but no you had to run off to Hawaii.:lol:

[Rybar]

Ok I'm trying to find the picture in your Avatar. I'm guessing there's a reason why your holding out on us? If not please post some pics! Looks killer BTW :thumbsup:

[rwhite692]

Mark, car looks beautiful and the interior is just killer.

That system should have you enjoying your Lady GaGa tunes for many happy miles, LOL.

[bigtyme1]

Ok I'm trying to find the picture in your Avatar. I'm guessing there's a reason why your holding out on us? If not please post some pics! Looks killer BTW :thumbsup:

did you not see these, http://www.lateral-g.net/forums/showpost.php4?p=318791&postcount=197

[Rybar]

did you not see these, http://www.lateral-g.net/forums/showpost.php4?p=318791&postcount=197

Strange I viewed those pages and never saw those pics? Anyways, car looks fantastic. That interior is unreal. :thumbsup:

[bigtyme1]

Strange I viewed those pages and never saw those pics? Anyways, car looks fantastic. That interior is unreal. :thumbsup:

I'm trying to get a good photographer to shoot the car, But it will have to wait until spring.

[Musclerodz]

How did the dyno tune go?

[bigtyme1]

How did the dyno tune go?

We started out in the morning around 286 RWHP and ended the day at 322 RWHP. Were having an issue with loosing fuel pressure at WOT. we started out at 58LBS and shut down at 50. the motor is running to lean at WOT. concensis is the hose inside the tank is colapsing. I'll change it out next week and go at it again.

[HRBS]

Mark... those are good baseline numbers buddy. Considering 20% driveline loss you are making around 400hp at the flywheel which are close to LS6 numbers. All that while running lean. Dial it in.... and you should find another 30-40 rwhp. :thumbsup:

[xdisaster240sx]

Hey Mark, Its Ricky :thumbsup:

[bigtyme1]

Hey Mark, Its Ricky :thumbsup:

Hey guys, This is Ricky, Good friend of mine who turns out to be a fantastic photographer has been up to the house to take a few shots . He's just getting into the business. He is willing to work with all of us close to Maryland, Pennsylvania and Delaware. I'm also planning on taking him to Columbus with us for shoots as were walking around. Welcome Ricky.

http://i941.photobucket.com/albums/ad251/bigtyme1/pro%20picks/Untitled-01.jpg

http://i941.photobucket.com/albums/ad251/bigtyme1/pro%20picks/5252788457_8db4c840c3_b.jpg

http://i941.photobucket.com/albums/ad251/bigtyme1/pro%20picks/doorpanel.jpg

http://i941.photobucket.com/albums/ad251/bigtyme1/pro%20picks/flush.jpg

http://i941.photobucket.com/albums/ad251/bigtyme1/pro%20picks/frontcamaro.jpg

http://i941.photobucket.com/albums/ad251/bigtyme1/pro%20picks/Untitled-3.jpg

http://i941.photobucket.com/albums/ad251/bigtyme1/pro%20picks/DSC_0061.jpg

http://i941.photobucket.com/albums/ad251/bigtyme1/pro%20picks/Untitled-5.jpg

http://i941.photobucket.com/albums/ad251/bigtyme1/pro%20picks/Untitled-4.jpg

http://i941.photobucket.com/albums/ad251/bigtyme1/pro%20picks/DSC_0081.jpg

http://i941.photobucket.com/albums/ad251/bigtyme1/pro%20picks/DSC_0157.jpg

http://i941.photobucket.com/albums/ad251/bigtyme1/pro%20picks/side.jpg

http://i235.photobucket.com/albums/ee2/xdisaster240sx/Mark%20Lengal%2069%20Camaro/top1.jpg

[Vegas69]

Bad ass:cheers: Who's the old guy in the drivers seat with that nice looking family?

[waynieZ]

Thats a great picture in front of the garage and a great looking family. If your delivering presents just pick anything you used on your project and I'll give you my address. Sweet ride.

[DOOM]

Mark you have next years Xmas card !!!!

[radrambler]

:thumbsup: CONGRATS

THE CAMARO TURNED OUT VERY NICE ..


TOM

[tones2SS]

Very nice car. Those photos came out awesome and pick up the sweet little details. Very nice.:cheers:

[awr68]

Nice shots Mark!! :thumbsup:

[Rybar]

Photos look great :thumbsup:

[bigtyme1]

Bad ass:cheers: Who's the old guy in the drivers seat with that nice looking family?

That's me, I rented the Family for the day!

[conekiller13]

Pretty pictures......

[Lenie]

Had to bump this one back up to the top, again, great build Mark and outstanding choice on interior shops. Beautiful interior work Tracy!

Last week I thought I'd try out my wifes new Camera. Wanted to get some good shots before the snow hits. Monday it goes to the dino for some tune work. Then will start perfecting some stuff over the winter months. Need to finish the engine compartment and a few other things.

http://i941.photobucket.com/albums/ad251/bigtyme1/Envy1020-1.jpg
http://i941.photobucket.com/albums/ad251/bigtyme1/Envy1022.jpg
http://i941.photobucket.com/albums/ad251/bigtyme1/Envy1033.jpg
http://i941.photobucket.com/albums/ad251/bigtyme1/Envy1135.jpg
http://i941.photobucket.com/albums/ad251/bigtyme1/Envy1154.jpg
http://i941.photobucket.com/albums/ad251/bigtyme1/Envy1149.jpg
http://i941.photobucket.com/albums/ad251/bigtyme1/Envy1161.jpg
http://i941.photobucket.com/albums/ad251/bigtyme1/Envy1172.jpg
http://i941.photobucket.com/albums/ad251/bigtyme1/Envy1013.jpg
http://i941.photobucket.com/albums/ad251/bigtyme1/Envy1145.jpg

[cencalc6]

Outstanding Car :thumbsup:

[Musclerodz]

For those old timers that know Mark, he texted me an said he sold his car at Mecum over the weekend and was the #9 top sale based upon Mecum's results. Not bad for a build that's been finished 8 years. I also updated his for sale thread, but figured more people would see this first.

https://www.mecum.com/collector-cars/results/

[syborg tt]

That is awesome and I couldn't be happier for him.

For those old timers that know Mark, he texted me an said he sold his car at Mecum over the weekend and was the #9 top sale based upon Mecum's results. Not bad for a build that's been finished 8 years. I also updated his for sale thread, but figured more people would see this first.

https://www.mecum.com/collector-cars/results/

[130fe]

Congrats to Mark! I always liked that car!

[waynieZ]

Mark congratulation's with the sale