View Full Version : spun aluminum breather
hifi875
03-18-2009, 12:31 PM
where can i get one?
Steve1968LS2
03-18-2009, 12:41 PM
You might want to be a bit more specific...
Do you have a picture?
deuce_454
03-18-2009, 04:37 PM
in a speed shop :thumbsup: :D
seriously, many of the circle track shops have a bunch... i found this on google in 60 seconds:
http://www.petersonfluidsys.com/tank_can.html
http://www.hrpworld.com/index.cfm?form_cat_id=272,51,363&action=category
there are propably 400 other places to get them
try canton, stefs, mooneyes etc. etc.
hifi875
03-18-2009, 07:17 PM
thanks, now i have to see if it will clear elec choke etc.
TonyG
03-25-2009, 08:00 PM
jegs.
http://www.jegs.com/webapp/wcs/stores/servlet/ProductDisplayPopup?storeId=10001&catalogId=10002&productId=1037891&langId=-1&showValue=3
JUSTANOVA
03-25-2009, 11:43 PM
http://www.speedwaymotors.com/Sure-Seal-Air-Cleaner,1601.html
I like these, they have an adapter that has an o-ring seal at the carb, best thing I have seen for keeping dirt out.
I looked at the one on jegs but didn't see if it had the sure seal o ring seal or not.
vBulletin® v3.8.11, Copyright ©2000-2025, vBulletin Solutions Inc.