front backspace help

[goob8869]

I have a 67 Camaro and bought a set of wheels that fit perfect until i put a disc conversion on it now the wheels are hitting the fenders instead of tucking under. Can someone give me the backspace for this problem. The conversion pushes the wheel out 1/8 inch.

[awr68]

What size wheels/tires do you have right now?

[goob8869]

17x8 but I am going with 19x8 on the new wheels

[awr68]

4.75" - 5" bs is what we all use on an 8" wheel...I prefer 5" bs and a 245 tire.

I would see what your current bs is and go from there.

[goob8869]

they are 4.75 with a 245 tire

[awr68]

Does the car have a good alignment? Those should work. Is the car lowered? What suspension are you using?

[ProdigyCustoms]

Be careful of overall height on those 19" tires, if you make the tires to tall, they will rub.

You 4.75 should work fine. You need a alignment

[goob8869]

The car is lowered and I am running QA1s with tubular a arms. What profile should I run with the 19"wheel, and should I reorder 4.75 or go with 4.87 to be on the safe side. The car does need to be aligned since I put on the a-arms. Thanks for the help

[ProdigyCustoms]

There is a lot to it. I will need to know what rear set up you want to run so I can find a set of tires that have the sizes, aspect, bulge we need in the same brand

Just call me. It is way easier to talk then type.