PDA

View Full Version : Mini Tub or not?

Swain
03-13-2009, 10:23 AM
So I am replacing both rear quarters and tail panel. Since I have this much work to do already should I just get with it and Tub it? I have the DSE stage 1 kit up front. I just love the look. I have a 68 Camaro. I will probably run the G bar in the rear.
slenning
03-13-2009, 11:12 AM
Big vote for mini tub here. My 69 was the first mini tub I'd ever done and was not bad at all. I'd guess in the 35 hour range or so. Definatly looks great when you can get that big rubber underneath.:yes: Any questions let me know
ProdigyCustoms
03-13-2009, 11:49 AM
If your going to run a G bar it is less work because you only have to do the tubs and DO NOT have to instal the big crossmember. If you are in there anyways, it does take the car to another level no doubt.
Swain
03-13-2009, 12:21 PM
Ya good point I wouldn't need that cross member. Thanks for reminding me on that Frank
Rybar
03-13-2009, 12:57 PM
If your at that stage I wouldn't even think twice about it. Just DO IT!! :unibrow:
youthpastor
03-13-2009, 01:11 PM
If your at that stage I wouldn't even think twice about it. Just DO IT!! :unibrow:

:D :D
Swain
03-13-2009, 02:19 PM
Thanks for all the in put. I will keep you guys posted and try to get some new pics up soon.
BBC69Camaro
03-13-2009, 03:06 PM
Just do it you won't regret it, every day you look at the rear meats:

335 left, 245 sized right:
http://i328.photobucket.com/albums/l346/Marroweter/Wheels/Wheels001.jpg

http://i328.photobucket.com/albums/l346/Marroweter/Engine/Engine Install/EngineInstall060.jpg
ibdmann
03-13-2009, 06:19 PM
if u are near huntington beach u can come see what 325's look like compared to the 275's before tubbing.
lil427z
03-13-2009, 06:25 PM
cut it.
rick k:woot:
Swain
03-17-2009, 09:29 AM
if u are near huntington beach u can come see what 325's look like compared to the 275's before tubbing.

haha I think im going to order the tubs this week. :)
Rybar
03-17-2009, 11:30 AM
haha I think im going to order the tubs this week. :)

You are a smart man :thumbsup:
Swain
03-24-2009, 09:05 AM
Ordered my tubs today:thumbsup:
ItDoRun
03-24-2009, 10:52 AM
It's not a bad project at all. It took me about 40 hours total, but I took my time and was very crititcal of the fit. Good luck!
ItDoRun
03-24-2009, 10:55 AM
You are a smart man :thumbsup:

Ryan,
You need to pull that credit card out and get a set coming your way, too! How about a set of Fikse's too while you're at it? :yes:
Steve Firebird
03-24-2009, 11:08 AM
Ordered my tubs today:thumbsup:
Way to go! You will be glad you did. Here is my 68 Bird with mini tubs G-bar and 11" rims 315 tires
Swain
03-24-2009, 12:33 PM
Ryan,
You need to pull that credit card out and get a set coming your way, too! How about a set of Fikse's too while you're at it? :yes:

That might be a small problem due to that fact I work for Budnik Wheels hahahaha.
Rybar
03-24-2009, 12:56 PM
Ryan,
You need to pull that credit card out and get a set coming your way, too! How about a set of Fikse's too while you're at it? :yes:

Well that's the eventual plan, however the project would require a narrowed tank, narrowed rear end (I have an original GM 12-bolt I don't want to cut up) new rear suspension, new tailpipes etc etc. Never mind the wheels/tires tubs and labour.

My car is finished for now. It will definately be done in the future.