PDA

View Full Version : Were can I find a tool to make

Mikael A
03-10-2009, 02:11 PM
Were can I find a tool to make these holes.
Swain
03-10-2009, 02:24 PM
Google Dimple Die Tool
deuce_454
03-10-2009, 02:44 PM
i have seen one made on a lathe... two turned pieces with a hole thru both for a long bolt, in one end of the two there was a male and female "punch" to cut/stamp the hole.. (and a valve spring in the female to pust out the stamped out piece) turn them both 180 deg and re-insert the bolt and they would fit together to form the edges of the hole.... could be worked with either a wrench or pneumatic/electric impact wherch....


google time found this:

http://www.mittlerbros.com/punch__flares.htm
tjbruning
03-10-2009, 02:54 PM
www.trick-tools.com
Mikael A
03-10-2009, 03:27 PM
Thanks,I have a press and a lathe so I will make my own.
bentfab
03-10-2009, 10:22 PM
Mitler Brothers