NEW Tremec T56 Magnum - Tech and Availability Information !

[KEISLER]

Hi Folks,

We are proud to announce that we will be carrying the new Tremec T-56 Magnum, rated at a whopping 700 LB-FT torque. Please find the attached details of product.

Keisler Engineering - the largest volume Tremec Elite Distributor - will be releasing a full line of installation kits for the new T56 Magnum for GM, Ford and Mopar applications.

We have one of our first installations in a media car being built at our southern California stocking distributor & installation center - D&P Classic - later this month. I will be there installing the product with them on a '69 Camaro, and doing a full video shoot.

Stay tuned for special Lateral-g forum announcement on Keisler Tremec Magnum Kits!

[KEISLER]

Attention Lateral-g Members,

We are proud to offer the all new 700 LB-FT Tremec T-56 Magnum, packaged up with special Keisler kit components as follows:

1. T-56 MAGNUM - any model for GM & FORD. (MOPAR To Be Announced)
2. SLIP YOKE
3. PILOT BEARING
4. BACK-UP LAMP WIRING HARNESS
5. REVERSE LOCK-OUT WIRING HARNESS
6. SPEEDOMETER CABLE
7. SPEEDOMETER CABLE DRIVEN GEAR, calibrated for your tire size & diff ratio
8. ELECTRONIC SPEED SENSOR WIRING HARNESS
9. POLY ISOLATOR MOUNT
10. MOUNTING HARDWARE
11. INSTALLATION INSTRUCTIONS
12. 12 MONTH WARRANTY

All of this, for you members, for just
$2995 and FREE SHIPPING to the lower 48 States !!

So email us ([email protected]) ([email protected]) call us 888-609-0070 x1 or PayPal (https://www.paypal.com/) your order to [email protected] along with details of your application.

[KEISLER]

Hi Folks,

I was at D&P Classic last week doing the install of the T56 Magnum in the new Yenko project with Chop Cut Rebuild (SpeedChannel). Tremec was also there on hand. It was a lot of fun and the episode will air this summer.

Watch it in HQ mode (high quality).

<object width="480" height="295"><param name="movie" value="http://www.youtube.com/v/K5JzFsh2dhw&hl=en&fs=1"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/K5JzFsh2dhw&hl=en&fs=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="480" height="295"></embed></object>

If you are in Southern California, take a visit to D&P Classic (www.dpchevy.com). They have more than 50 classics under restoration and modernization now - a great bunch of folks.

[slownova]

does it mount the same as a average t56? could i use my ls1/t56 blow proof housing with this? whats the tranny cost alone?

[KEISLER]

does it mount the same as a average t56? could i use my ls1/t56 blow proof housing with this? whats the tranny cost alone?

Hi,
Yes, it does mount the same. You can use your LS bell. The tranny costs $2795 alone. But with the Lateral-g member discount, you get the complete essentials kit and free shipping for just $200 more.
Shafi

[KEISLER]

Hi Folks,

We have already designed, built and shipped a number of custom T56 MAGNUM PerfectFit kits.

Check out these pics from a SpeedChannel photoshoot for an upcoming episode of Chop Cut Rebuild featuring the T56 Magnum in Project YENKO:

http://i265.photobucket.com/albums/ii222/skeisler1968/67-69Camaro-FirebirdT56MAGNUM_A.jpg

http://i265.photobucket.com/albums/ii222/skeisler1968/KEISLER_PF_T56MAG_5.jpg

http://i265.photobucket.com/albums/ii222/skeisler1968/DP_CCR_2.jpg

http://i265.photobucket.com/albums/ii222/skeisler1968/DP_CCR_3.jpg

http://i265.photobucket.com/albums/ii222/skeisler1968/DP_KE_CCR10.jpg

http://i265.photobucket.com/albums/ii222/skeisler1968/DP_KE_CCR11.jpg

http://i265.photobucket.com/albums/ii222/skeisler1968/DP_CCR_1.jpg

These kits are very affordable, and are based on what Keisler Engineering has brought to the industry for the past 10 years - PerfectFit.

Give us a call or email, and we'll build one for you!

Shafi Keisler, Pres/CEO & Founder