Announcing Project Re-Peeled: Brought to you by D & Z Customs- Lots of Pics [Archive]

View Full Version : Announcing Project Re-Peeled: Brought to you by D & Z Customs- Lots of Pics

cmraman

02-23-2009, 11:22 AM

Due to time constraints and Randy's own admission of computer illiteracy, I am posting this project announcement on his behalf....

Announcing Project Re-Peeled:
Brought to you by D & Z Customs

http://farm4.static.flickr.com/3644/3303416671_9684100165.jpg

After much success with our ’66 Chevelle, we decided to up the anty with the rebirth of an older project car and bring it up to date. Project Orange Peeler was a project car that we built in 1998 and was Featured in Car Craft Magazine of that same year. After selling the car, I found myself in a world of regret. After 7 years the car was again available. After buying it back the intent was just to keep as it was and remember those days. But a turn of events came up after talking with Marc Prince, new owner of Heidts Hot Rods and Muscle Cars, at the Second Peak Chicagoland Nationals Good Guys show in Joliet Il, the Project “Re-Peeled” was born. In a partnership with Marc, the project will be running a Heidts subframe and suspension, subframe connectors and the prototype Super Ride IRS that will be available through Heidts as a complete bolt in kit for 2nd Gen F bodies. The motor will be a stout 6.0 L LS (LQ4) based motor with custom cam from Crane Cams and will incorporate a new supercharger from Vortech. Behind that will be a T-56 6-speed transmission. This car will also be using a new cooling system from BeCool. The rolling stock are 18” Forgelines FS 3P wrapped in Nitto’s new NT-05’s. To stop the meats will be using the Wilwood 6 piston brakes in front and Wilwood 4 pistons in the rear. The interior will be caged and a simple functional interior will be represented by Autometer Gages, Hurst Shifter, Ididt column, Grant Steering wheel and Cerullo seats. This is inteded to be driven for the 2009 Power tour so Vintage Air will be keeping the cabin cool. Other that Power Tour, we are planning to bring this car out to many events this year and thrash on it on the Auto-X. Some of the events planned so far are Good Guys in Columbus, Joliet, Hot Rod Power Tour, and Car Craft Nationals. Thanks to all of our sponsers for all their help to make this project possible.

Our Sponsers:

Heidts Hot Rods and Muscle Cars
Forgeline Wheels
Nitto Tires
Ididit
Wilwood
Crane Cams
Vortech Superchargers
Vintage Air
BeCool
AGR Performance
PPG paints
QA-1
West Bend Dyno Tuning
Stainless Works
Goodmark Industries
Randy’s Ring and Pinion
Cerullo
Trend Setters
Wegner Motorsports
Ace Upholstry
Kwik Wire
Speartech Engineering

The original car...
http://farm4.static.flickr.com/3328/3303416417_c62679d40e.jpg

Before:

http://farm4.static.flickr.com/3396/3304246598_aa2a960ba4.jpg

The teardown...

http://farm4.static.flickr.com/3457/3303423187_c0478940fb.jpg

http://farm4.static.flickr.com/3614/3304403092_122b8722a9.jpg

http://farm4.static.flickr.com/3493/3304402540_ae349d22d3.jpg

http://farm4.static.flickr.com/3622/3304250758_e8c83e1110.jpg

http://farm4.static.flickr.com/3445/3304250118_3176c4dfef.jpg

http://farm4.static.flickr.com/3571/3304249420_4db61b36f9.jpg

http://farm4.static.flickr.com/3602/3303420635_254915e991.jpg

Current Project State...

http://farm4.static.flickr.com/3449/3303420121_6812d932ac.jpg

http://farm4.static.flickr.com/3618/3304247212_6b0f4dacbc.jpg

Suspension...

http://farm4.static.flickr.com/3624/3303423701_9a43edd901.jpg

Wheels look Killer....

http://farm4.static.flickr.com/3463/3304247770_81dc5d19a8.jpg

http://farm4.static.flickr.com/3315/3303417281_41dce5f65a.jpg

jy211

02-23-2009, 11:41 AM

the wheels do look killer :hail: :thumbsup:

VP23271

02-23-2009, 01:34 PM

Very nice 2nd gen and that rear suspension looks pretty trick.

tones2SS

02-23-2009, 04:38 PM

Awesome!!!
Looks like a very clean car to begin with.
Keep us posted.:thumbsup:

66LS7

02-23-2009, 06:31 PM

the wheels do look killer :hail: :thumbsup:

Thanks, I worked with Scott at Forgeline to build the right looking wheel. Those guys at Forgeline really know there stuff, & top notch customer service.:thumbsup:

Randy(D&Z Customs LLC.)
1-262-347-9741

66LS7

02-23-2009, 06:33 PM

Awesome!!!
Looks like a very clean car to begin with.
Keep us posted.:thumbsup:

The car originally came from California, but there are still little areas to fix.

Randy(D&Z Customs LLC.)
1-262-347-9741

66LS7

02-23-2009, 06:37 PM

Very nice 2nd gen and that rear suspension looks pretty trick.

I worked with the engineers at Heidts to develop the brackets & mounting pieces. I can't wait to get out on the track & see how well it will all work.:lateral:

Randy (D&Z Customs LLC.)
1-262-347-9741

66LS7

02-23-2009, 08:34 PM

Thanks Rob for helping me with posting the new project "Re-Peeled":cheers: :lateral:

Randy(D&Z Customs LLC.)
1-262-347-9741

syborg tt

02-23-2009, 08:54 PM

Subscribed

Randy - where are you located. You must be local if the cameraman is taking the pics.

cmraman

02-23-2009, 09:14 PM

Thanks Rob for helping me with posting the new project "Re-Peeled":cheers: :lateral:

Randy(D&Z Customs LLC.)
1-262-347-9741

No Problem Randy!:thumbsup:

66LS7

02-24-2009, 05:33 AM

Subscribed

Randy - where are you located. You must be local if the cameraman is taking the pics.

Hi Marty, I'm located in Kewaskum ,WI. 1 hr. north of Milwaukee.:woot:

Randy(D&Z Customs LLC.)
1-262-347-9741

thedude327

02-24-2009, 09:22 AM

Nice looking project Randy !!! How bout' some more pics as the build progress's............. Is that rear section based off of the vette style rear axle?

Paul

:thumbsup:

66LS7

02-24-2009, 07:32 PM

Nice looking project Randy !!! How bout' some more pics as the build progress's............. Is that rear section based off of the vette style rear axle?

Paul

:thumbsup:

Hi Paul, the rear is based on a 9in. center with corvette outer bearings & hubs.

Randy(D&Z Customs LLC.)
1-262-347-9741

caper150

02-24-2009, 09:50 PM

It's amazing on how nice of cars some of you guys tear apart, I wish mine looked that good finished :lol:

skatinjay27

02-24-2009, 10:47 PM

66LS7

02-25-2009, 04:56 PM

randy the irs look sweet!!!!!!!

question though, why did you guy remove the front clip (fender/header panel/etc) as one piece?
at first I thought it was cause you werent going to do a repaint but then say the pic of the shell blasted.

Hi AJ, I took the front off as a complete unit for tech pictures. I normally wouldn't do it that way.

Randy(D&Z Customs LLC.)
1-262-347-9741

cmraman

02-25-2009, 05:11 PM

Hi AJ, I took the front off as a complete unit for tech pictures. I normally wouldn't do it that way.

Randy(D&Z Customs LLC.)
1-262-347-9741

Sure blame me. I see how it is

cmraman

02-26-2009, 06:38 PM

We are excited to announce that Tremec will be added as a sponsor to Project "RE-Peeled". D & Z Customs would like to thank Tremec for their assistance with this exciting project. :thumbsup: :thumbsup:

cmraman

02-28-2009, 04:20 PM

http://farm4.static.flickr.com/3564/3315865769_6f31a17cbd.jpg

http://farm4.static.flickr.com/3405/3315868269_8341bc3bbf.jpg

http://farm4.static.flickr.com/3439/3316696096_c24d756e0a.jpg

Kendall Burleson

03-01-2009, 10:56 AM

Killer start love the tubs work.

syborg tt

03-01-2009, 07:25 PM

what size tire you planning to running on the back ?

66LS7

03-02-2009, 08:48 PM

what size tire you planning to running on the back ?

I am using Nitto's new NTO5's 275-35-18's on the front & 295-35-18's on the back. I mini tubbed the back for future tire room, I have the car apart now why not.

Randy(D&Z Customs LLC.)
1-262-347-9741

syborg tt

03-02-2009, 09:11 PM

I am using Nitto's new NTO5's 275-35-18's on the front & 295-35-18's on the back. I mini tubbed the back for future tire room, I have the car apart now why not.

Randy(D&Z Customs LLC.)
1-262-347-9741

Okay now it looks like i'm going to be doing a road trip.

The rear is very similar to what I am planning

245 - 45 17 ZR Nitto NT 555

295 - 45 18 ZR Nitto NT 555

Van B

03-02-2009, 09:37 PM

Let me know Marty, you can swing off exit 327 and pick me up!

cmraman

03-05-2009, 07:38 PM

Finished minitub...

http://farm4.static.flickr.com/3560/3332348282_830e6146cf.jpg

http://farm4.static.flickr.com/3335/3331511657_3ccaa66944.jpg

Tires mounted and mocked up...bitchin...

http://farm4.static.flickr.com/3640/3331513475_fb6c8e1c32.jpg

http://farm4.static.flickr.com/3409/3332349256_2f4ebd06d6.jpg

Wilwood pedal assembly...

http://farm4.static.flickr.com/3367/3332348908_75af0ce447.jpg

http://farm4.static.flickr.com/3340/3332348570_79c345c1e4.jpg

Drivers side minitubs are being cut...

http://farm4.static.flickr.com/3343/3331510833_af272fd59b.jpg

http://farm4.static.flickr.com/3552/3331509933_56c5db000b.jpg

airgrabber72

03-17-2009, 08:58 AM

I really dig this ryd, when can we see more pics??

cmraman

03-25-2009, 09:28 AM

More updates on the body work.. the quarter has been removed and other panels prepped for paint or replacement...

http://farm4.static.flickr.com/3653/3384530259_3084d770bb.jpg

http://farm4.static.flickr.com/3555/3385344026_b3b6ab9e6b.jpg

http://farm4.static.flickr.com/3617/3384529137_e31c90b153.jpg

cmraman

03-30-2009, 12:39 PM

Fixing small dents...

http://farm4.static.flickr.com/3643/3398733001_c76946208f.jpg

Passenger side gets a new quarter panel...

http://farm4.static.flickr.com/3597/3399540306_924bf7f280.jpg

Front sheet metal gets first primer coat...

http://farm4.static.flickr.com/3539/3398732261_d6dae43bff.jpg

New tail panel gets fitted...

http://farm4.static.flickr.com/3640/3399539460_967d25fbe4.jpg

Thanks to our friends at Goodmark for their added support to this project. :thumbsup:

cmraman

03-31-2009, 11:23 AM

More progress being made, won't be long now...

Cowl removed and being prepped for the new one...

http://farm4.static.flickr.com/3552/3401432503_a5856a468c.jpg

http://farm4.static.flickr.com/3619/3402233828_6d3f0bf4c1.jpg

Rear filler panel is removed for the replacement and the trunk floor is prepped for the recessed stainless steel tank...

http://farm4.static.flickr.com/3111/3401430423_302635d513.jpg

Body filler added to smooth out the old dings....

http://farm4.static.flickr.com/3439/3402236194_efc62816ee.jpg

http://farm4.static.flickr.com/3631/3402234534_ec7e8a25e8.jpg

Ralphlovs72chev

04-01-2009, 08:59 AM

Im new here and i have a 72 Camaro. Yours is really coming along really nice.:hail: Im watching this thread as you go along.....
thanks for the insparation:thumbsup:

66LS7

04-01-2009, 04:23 PM

Im new here and i have a 72 Camaro. Yours is really coming along really nice.:hail: Im watching this thread as you go along.....
thanks for the insparation:thumbsup:

Thanks for the comments, glad to have you on this site. If you have any questions or are looking for parts let me know.:lateral:

Randy(D&Z Customs LLC.)
[email protected]
1-262-347-9741

thedude327

04-01-2009, 04:26 PM

66LS7

04-02-2009, 05:43 AM

Randy,

Your crew is making quick work of that Second Gen rehab. !! Looks like it'll be ready for paint in no time at all.
Oh and thanks for the side view pic of the competition engineering subframe connectors. Gives a good idea of how low they hang installed ! :thumbsup:

Paul

Hi Paul,
We're hoping to have the bottom of the car spayed next week so we can do the final suspension install & get you some pictures of the new Heidts frame connectors.:thumbsup:

Thanks Randy(D&Z Customs LLC.)
[email protected]
1-262-347-9741

thedude327

04-02-2009, 02:41 PM

Thanks Randy !! That should make it easy to compare the fit of the different sub connectors. Painting the underbody.....man, you guys are fast !! :thumbsup:

Paul

cmraman

04-15-2009, 08:38 AM

Body is getting prepped for paint... underside will be ready soon for paint and Gas tank is in and final fitting it underway...

http://farm4.static.flickr.com/3580/3444949914_b8b87b5d85.jpg

http://farm4.static.flickr.com/3368/3444130415_630d4a9097.jpg

http://farm4.static.flickr.com/3336/3444948410_d5baa60f2d.jpg

http://farm4.static.flickr.com/3333/3444129201_59a70a380d.jpg

http://farm4.static.flickr.com/3369/3444128545_c0df42ff86.jpg

Ralphlovs72chev

04-15-2009, 10:30 AM

Looking really good! Love that gas tank:thumbsup:

66LS7

04-15-2009, 04:04 PM

Looking really good! Love that gas tank:thumbsup:

I would like to thank Rick's Hot Rods for building the awsome tank. Thanks also to Hector for all his help.:thumbsup: :lateral:

Randy (D&Z Customs LLC.)
1-262-347-9741

Ralphlovs72chev

04-15-2009, 10:51 PM

Randy,
Will you be painting the underbody, body color or something else?

66LS7

04-16-2009, 05:28 AM

Randy,
Will you be painting the underbody, body color or something else?

I like the bottom of cars to be satin black in finish. I think it just looks cleaner.

Randy (D&Z Customs LLC.)
1-262-347-9741

airgrabber72

04-16-2009, 10:19 AM

kick ass!:cheers:

cmraman

04-20-2009, 08:03 AM

This weekend a big step was taken. The firewall and the underside got it's black satin finish on. Suspension and subframe will be installed today...stay tuned. We are getting one step closer to paint and final assembly. WOOHOO!
:D

http://farm4.static.flickr.com/3659/3458772391_83b47805bf.jpg

http://farm4.static.flickr.com/3503/3458771823_7878d0e692.jpg

http://farm4.static.flickr.com/3544/3459585604_cd20c17049.jpg

SS1156

04-20-2009, 08:37 PM

66LS7

04-21-2009, 06:21 PM

The car looks amazing. You guys do great work. I can't wait to see the final result of all that hard work. I keep looking at this thread for inspiration and it is working!!! Keep up the updating and pics. I love it :drool:

Thanks for the compliment I really appreciate it. Jeff & Darrel do great work for me, they are making it straighter than GM ever planned. I'm glad we are able to keep you inspired.:thumbsup: :lateral:

Randy (D&Z Customs LLC.)
1-262-347-9741

cmraman

04-21-2009, 06:26 PM

Thanks for the compliment I really appreciate it. Jeff & Darrel do great work for me, they are making it straighter than GM ever planned. I'm glad we are able to keep you inspired.:thumbsup: :lateral:

Randy (D&Z Customs LLC.)
1-262-347-9741

How's this for inspiration...

The rear suspension is in!

http://farm4.static.flickr.com/3512/3464367244_3bac8b274c.jpg

:thumbsup:

Ralphlovs72chev

04-22-2009, 08:53 AM

:wow: This is really looking nice..... I can just imagine when its all done :unibrow: .....

thedude327

04-22-2009, 04:38 PM

Randy,

Your ride is looking sweet !! More pics !! It looks like it's getting closer to being a roller again gonna have to check back to see the stance.

Paul
:thumbsup:

c.schulz

04-29-2009, 03:13 PM

Keep me posted on how this works out.

Chris

66LS7

04-30-2009, 04:37 PM

Keep me posted on how this works out.

Chris

I will be doing actual testing on the car after it is completed & try to post the info.

Thank You Randy(D&Z Customs LLC.)
1-262-347-9741:thumbsup:

cmraman

05-12-2009, 02:46 PM

We want to thank all our sponsors for helping us make this project come to life...

here are some of the engine pieces we go recently...

http://farm4.static.flickr.com/3387/3525056953_b6b990b4f8.jpg

http://farm4.static.flickr.com/3308/3525056107_218053bd32.jpg

http://farm4.static.flickr.com/3360/3525055271_2293d01986.jpg

http://farm4.static.flickr.com/3558/3525057741_329e0fb5b6.jpg

http://farm4.static.flickr.com/3394/3525860518_10201bfcca.jpg

http://farm4.static.flickr.com/3647/3525054023_3edd3f3f14.jpg

cmraman

05-12-2009, 02:55 PM

[B]The body is one, fitted, now in Primer.

http://farm4.static.flickr.com/3300/3525864138_fbda34dc09.jpg

Color going on the door jambs and window frames....

http://farm4.static.flickr.com/3332/3525858988_5e10446745.jpg

http://farm4.static.flickr.com/3619/3525857316_19400bd2be.jpg

Inner door panels, inner trunk, etc...

http://farm4.static.flickr.com/3313/3525052339_05f0f08e27.jpg

cmraman

05-12-2009, 03:02 PM

We want to thank Lizard Skin for their involvement with our project. Here are some shots of the application.

http://farm4.static.flickr.com/3539/3525045977_cfb05b3844.jpg

http://farm4.static.flickr.com/3573/3525045209_92c048b5f4.jpg

http://farm4.static.flickr.com/3343/3525855620_bbc482462f.jpg

http://farm4.static.flickr.com/3548/3525047887_19357ba492.jpg

http://farm4.static.flickr.com/3566/3525864856_7d709f16cb.jpg

70rs

05-12-2009, 10:36 PM

Ralphlovs72chev

05-13-2009, 10:57 AM

WhitecatD

05-13-2009, 01:08 PM

66LS7

05-13-2009, 05:29 PM

Randy on that Lizard skin, how much material was needed to do the car and what size needle was use for the application? Im intrested in buying some and doing the same thing to my car. Love the progress and color choice:thumbsup:

The amount of Lizard Skin is caculated by figuring the square footage of the panels you would like to cover. I used the optional gun that you can purchase from Lizard Skin. I would give them a call & they can set you up.(1-800-549-0043).

Thank You Randy (D&Z Customs LLC.)
1-262-347-9741:thumbsup:

66LS7

05-13-2009, 05:33 PM

I agree, the lizard skin looks great!:yes:
I have some questions.

Being water based, how well does the stuff stick?

Could I just spray the Lizard Skin on and then not put any carpet in? In other words, is the Lizard Skin strong enough to be used like a floor mat?

The product sticks very well, it can be used on the bottom of the car if you choose, but should be top coated with a paint to ease clean-up. I would recomend contacting Lizard Skin & ask for specific details on aplications. (1-800-549-0043).

Thank You Randy (D&Z Customs LLC.)
1-262-347-9741:lateral:

66LS7

05-13-2009, 05:35 PM

Randy,
The car is looking great! I wish mine was as far along. Are you any closer to letting us in on that rear suspension set up? Pricing, what's in the kit? Install pics and notes? I am really interested in doing that to mine.
Thanks and keep those pictures coming!

They are still working out the details on pricing, it should be pretty soon.

Thank You Randy (D&Z Customs LLC.)
1-262-347-9741:D

cmraman

05-16-2009, 10:25 AM

The Camaro is really coming together now!! It'll have it's color by the end of the weekend. Here is it is in final primer after blocking, being prepped for final color. :unibrow: :thumbsup:

http://farm4.static.flickr.com/3656/3536449310_1105eb43a2.jpg

http://farm3.static.flickr.com/2402/3536448924_2d7a100b90.jpg

http://farm3.static.flickr.com/2105/3536448540_d7bcbe221d.jpg

http://farm4.static.flickr.com/3653/3535632941_93c3351c72.jpg

http://farm3.static.flickr.com/2046/3536447496_55584f75c1.jpg

Jeff's to do list... getting shorter!

http://farm4.static.flickr.com/3374/3536439146_5463eee64d.jpg

Spiffav8

05-16-2009, 11:45 AM

Awesome thread...Awesome car!

:thumbsup:

thedude327

05-17-2009, 08:53 AM

Looks like some good progress has been made. Can't wait to see the painted pics.

:thumbsup:

Paul

CamaroPat

05-17-2009, 09:26 PM

Everything looks GREAT! Top notch build you have coming together, hope I get to see it in person at a show some time.

Kory 88Iroc Lt1

05-17-2009, 09:41 PM

looks nice subscribing
Kory

cmraman

05-27-2009, 06:42 PM

The car is painted and should be a roller this weekend....

http://farm3.static.flickr.com/2483/3571157959_cbe58caaa7.jpg

We also want to thank Spec for our new twin disc clutch

http://farm4.static.flickr.com/3558/3571157305_45a4b068f4.jpg

and Tremec for their involvement with the new T-56 Magnum...

http://farm4.static.flickr.com/3571/3571156563_b89061d1a1.jpg

http://farm4.static.flickr.com/3320/3571962496_2c3c48d111.jpg

70rs

05-27-2009, 10:40 PM

The car looks great! I liked it before but now it's even better. Nice work.
I'm waiting to see how that rear set up works out. I'd love to have that in my car too!

cmraman

06-05-2009, 10:58 PM

The Forgelines and Nittos finally get to hit the ground. That's right PT fans, it's officially a roller.

http://farm4.static.flickr.com/3586/3599956644_5a433b6f2d.jpg

http://farm4.static.flickr.com/3340/3599145249_3e90dd6b1b.jpg
:lateral:

Ralphlovs72chev

06-05-2009, 11:06 PM

looking great!:thumbsup: i can smell the fresh paint from here:unibrow: ...i cant belive how fast you guys have done all of this:hail:

thedude327

06-06-2009, 07:06 AM

Car is looking great !! Glad to see it's back on wheels , nothing motivates better than fresh paint..........:lolhit: So what's next on the to-do list?

Paul

prime73

06-13-2009, 08:58 PM

66LS7

06-14-2009, 08:05 AM

If you don't mind me asking who is that hood made by? Is it steel or fiberglass & any modifications to it? I prefer a stock flat hood over most cowl hoods but due to hood clearance issues a cowl is needed. This one seems to follow the lines of the fender a lot better than most!
Thanks and beautiful car! :thumbsup:

The hood is fiber glass & we have many hours in it to make it look as good as it does. I believe the co. in which the hood comes from is Unlimited fiber glass. We had to modify the back side for clearances, & then the edges to meet up with the fenders better. I would recommend getting a steel hood depending on the amount of clearance you need. I am a Good Mark dealer let me know if I can help.

Thank You
Randy(D&Z Customs LLC.)
[email protected]
1-262-347-9741:lateral:

MaxHarvard

06-14-2009, 08:58 AM

Love the color! I'm a sucker for hugger orange :woot:

legend

06-23-2009, 10:20 AM

looks great, is that a jaguar based rear end?

http://www.jcna.com/library/tech/images/tech0009b.jpg

if so watch for the roll oversteer

cmraman

07-21-2009, 03:34 PM

It's been a while and the car is making progress. We have gotten some new parts in and wanted to thanks those who have helped....

Thanks to Muscle Rods for supplying the custom headers to work with our Heidts subframe....

http://farm4.static.flickr.com/3448/3743376163_ca3faf951b_b.jpg

And to Hoodlatches.com for their participation...

http://farm4.static.flickr.com/3656/3743372667_9e0fc55858.jpg

http://farm3.static.flickr.com/2584/3744167230_e74bea393a.jpg

chadroc

07-29-2009, 03:25 PM

Randy, what are you thinking that 6.0 is going to be at for HP?

66LS7

08-06-2009, 05:49 AM

Randy, what are you thinking that 6.0 is going to be at for HP?

Sorry about the late response been extremely busy,Wegner Automotive dyno tested the motor with just a carb & MSD timing controller. We made 581H.P & 515 Ft. LBS. TRQ. with the compression ratio of 9.5:thumbsup: :lateral:
Thank You
Randy(D&Z Customs LLC.)
[email protected]
1-262-347-9741

rallye455

08-09-2009, 01:40 PM

What size wheels and tires are they?

cmraman

08-18-2009, 05:25 AM

Our 6.0L motor built by Wegner Motorsports is now installed...

http://farm4.static.flickr.com/3484/3832710565_6bc7ed8d7a.jpg

Thanks also to Chris Sondles and Soff Seal for their contribution with the seals used on our project...

http://farm4.static.flickr.com/3470/3832709757_7c5e3b63f6.jpg

And "Project Re-Peeled" in it's final assembly stage...

http://farm4.static.flickr.com/3490/3832709005_84da3537b5.jpg

Any build isn't complete with out a little help now and again... Here is the D of D&Z, Dylan Johnson helping painting some parts for dad....

http://farm3.static.flickr.com/2656/3832710939_e417c1c2b0.jpg

And also the Z of D&Z, Zoey Johnson helping dad with the wiring...

http://farm3.static.flickr.com/2421/3832711311_589d005f26.jpg

:thumbsup:

tones2SS

08-18-2009, 06:58 AM

Very cool. Car is looking good and almost complete!
It's good to have some helpers!:thumbsup:

70rs

08-18-2009, 10:18 AM

Very cool. Car is looking good and almost complete!
It's good to have some helpers!:thumbsup:

X2!!^^

What steering column is that you are using?

66LS7

08-18-2009, 10:27 AM

Thanks for the response, the steering column is from Ididit. It doesn't have a key in it, I chose to relocate the ignition switch.:thumbsup: :lateral:

Thank You
Randy(D&Z Customs LLC.)
[email protected]
1-262-347-9741

silverz28

08-22-2009, 10:47 AM

Great build! Nice to see cool 2nd gen builds on the site.:thumbsup:

cmraman

09-03-2009, 10:43 AM

We want to extend our thanks to Essex Fuel systems for their involvement...

http://farm3.static.flickr.com/2540/3883977467_ab34483e22.jpg

Speartech engine harness and CPU....

http://farm3.static.flickr.com/2513/3884769592_be398a1643.jpg

BE Cool for their sponsorship..

http://farm3.static.flickr.com/2499/3884769014_59b5571c4b.jpg

http://farm4.static.flickr.com/3420/3883975567_e5b76d4236.jpg

and also a big thanks to AutoMeter for their interest in the project...

http://farm4.static.flickr.com/3504/3884767714_9bb6146662.jpg

70rs

09-03-2009, 03:19 PM

Very nice indeed! What is the schedule for finishing the car? When do we get the full photo set? It's looking great!

66LS7

11-27-2009, 09:50 AM

Hi everyone, sorry of the late posts I have been very busy with getting the car ready for the Optima Invitational. I am finally able to post some pictures of the car.

21136

Thank You
Randy(D&Z Customs LLC.)
[email protected]
1-262-347-9741

70rs

11-27-2009, 10:26 AM

camcojb

11-27-2009, 10:31 AM

that's a great car Randy, even better in person. :thumbsup:

Jody

66LS7

11-27-2009, 10:50 AM

Thanks for the updates Randy. The car looks great. I wish I could have been there to watch at the Optima Challenge. I like the new wheels, but I also like the silver center wheels that were on the car before, are those the "street" wheels?

The black Forgeline wheels are set up with Nitto NT01's for track days . The silver Forgeline wheels are set up with Nitto NT05's for street & some auto-x's

Thank You
Randy(D&Z Customs LLC.)
[email protected]
1-262-347-9741

66LS7

11-27-2009, 10:53 AM

that's a great car Randy, even better in person. :thumbsup:

Jody

Thanks Jody, your Chevelle is pretty awsome also! Have you had any solid interests in it?:thumbsup: :lateral:

Randy(D&Z Customs LLC.)
[email protected]
1-262-347-9741

camcojb

11-27-2009, 10:55 AM

Thanks Jody, your Chevelle is pretty awsome also! Have you had any solid interests in it?:thumbsup: :lateral:

Randy(D&Z Customs LLC.)
[email protected]
1-262-347-9741
yes, there's a couple serious guys, will just have to wait it out.

Jody

protour73

11-27-2009, 03:19 PM

Hey Randy.....what are the details on that entire rearend setup?? Damn that is a wicked SICK assembly.

66LS7

11-27-2009, 09:07 PM

Hey Randy.....what are the details on that entire rearend setup?? Damn that is a wicked SICK assembly.

The rear is a prototype bolt in I.R.S. set up for 70-81 f-bodies that I helped develop with Heidts Hot Rod & Muscle Cars. We are hoping to have it ready to sell this coming spring.:thumbsup:

Randy(D&Z Customs LLC.)
[email protected]
1-262-347-9741

94snglturbo

12-03-2009, 07:05 AM

beautifull car..

Payton King

12-03-2009, 10:38 AM

those NT05's? I have been thinking about getting a set. How about the NT01's. Can you give me a comparison?

Car looks great!

73CPCAMARO

12-03-2009, 09:44 PM

I love this car. Great job!

protour73

12-04-2009, 06:28 AM

The rear is a prototype bolt in I.R.S. set up for 70-81 f-bodies that I helped develop with Heidts Hot Rod & Muscle Cars. We are hoping to have it ready to sell this coming spring.:thumbsup:

Randy(D&Z Customs LLC.)
[email protected]
1-262-347-9741Dear Santa: I've been a very very good boy this year, you can even ask my wife......honest!!!! LOL :unibrow:
.
.
.
Randy, will this be sold by Heidt's? keep a watch on thier website?

66LS7

12-04-2009, 12:24 PM

those NT05's? I have been thinking about getting a set. How about the NT01's. Can you give me a comparison?

Car looks great!

I love both sets of tires. The NT05 are an awsome street tire, great handling & response. The tires are also good in the rain. NT01's are well mannered on the street but really work well when you get them warmed up on the track.:thumbsup: It really depends on the driving that you are going to be doing.

Thank You
Randy(D&Z Customs LLC.)
[email protected]
1-262-347-9741

66LS7

12-04-2009, 12:33 PM

Dear Santa: I've been a very very good boy this year, you can even ask my wife......honest!!!! LOL :unibrow:
.
.
.
Randy, will this be sold by Heidt's? keep a watch on thier website?

The I.R.S. will be sold by Heidts or dealers like myself.:thumbsup:

Thank You
Randy(D&Z Customs LLC.)
[email protected]
1-262-347-9741

srh3trinity

12-04-2009, 06:09 PM

How has the IRS performed so far? The car looks great!

66LS7

12-04-2009, 08:03 PM

How has the IRS performed so far? The car looks great!

The I.R.S. works very well, we are still doing some tests. We want to make sure we get eveything 100% before it goes on the market, & be able to have tuning info so it's easier for the end user.

Thank You
Randy(D&Z Customs LLC.)
[email protected]
1-262-347-9741:lateral:

tony byram

12-05-2009, 02:04 PM

Randy, project re-peeled looks GREAT! Ive been watching your build for a while here. Love second gen Camaros, and that ones beautiful! Now........ if I can only find those winning lottery ticket numbers, Ill be all set! :thumbsup:

nvr2fst

12-06-2009, 07:48 PM

262 area code? You have got to be somewhere out my back door.

66LS7

12-06-2009, 08:42 PM

66LS7

12-06-2009, 08:43 PM

262 area code? You have got to be somewhere out my back door.

I'm about an hour north of Milwaukee, WI.

Randy(D&Z Customs LLC.)
[email protected]
1-262-347-9741

awr68

12-06-2009, 09:45 PM

Great car Randy!! :thumbsup:

66LS7

12-07-2009, 01:12 PM

Great car Randy!! :thumbsup:

Thank you for the compliment.:lateral:

Randy(D&Z Customs LLC.)
[email protected]
1-262-347-9741