TravisB
02-02-2009, 10:42 PM
I built this truck to haul my boat. Well like everyone I have had to sell some stuff to make room for other intrests. Now its time to sell the dually as I dont have a need for it. Over 25k in parts and several hundred hours of labor. 1000 miles since completed. Paint and body is a solid 8 out of 10. The entire truck has been wet sanded and buffed. This is by far the best riding and driving one ton dually you have ever ridin in. Please forward this email to anyone who may be interested.
1994 Chevrolet 1 ton dually
Disc brakes on all four corners
22" Alcoa polished 10 lug wheels
New nitto tires
solid steel machined adapters
OEM GMC grille shell
All clear lights
Shaved door handles and tailgate
AVS compents used
shaved work truck front bumper
Body line added to cab corner
Rear fenders widened to allow wheel fitment
Sir micheals roll pan modfied to bolt on
Bed floor covered with sheetmetal
All inner bed panels are steel with a stepped edge
over 400 stainless allen heads in the bed
All suspension tubing 1.75 .120 wall
frame notch is double walled and fully welded
Air Ride Tech control arms
Air Ride Tech big red valves and bags
10 gallons of on board air
2 viar 450 compressors
Suicide doors custom built 4 link 1.5 in .250 wall link bars
Optima Red Top battery
Rockford Fostage power series stereo compents
2 10's, 2 6.5"s, 2 4x6's
Kenwood flip out in dash TV
hornblasters.com train horns
rebuilt trans 25k miles
rebuilt rear end with locker 4k miles
454 ci BBC per prior owner it was rebuilt(bearings, rings, pistons, at 102k miles)
Truck now has 154k
ceramic coated headers w/3' mandrel bent dual exhaust flowmaster mufflers
ride height is about 5in and the crossmember truck does just barely lay frame and sits on bump stops all the way around.
Color is a factory Ford White
Windows are tinted
satin black window surround painted on the truck.
25k OBO
Travis Ball
479-426-3462
www.kdhotrods.com
1994 Chevrolet 1 ton dually
Disc brakes on all four corners
22" Alcoa polished 10 lug wheels
New nitto tires
solid steel machined adapters
OEM GMC grille shell
All clear lights
Shaved door handles and tailgate
AVS compents used
shaved work truck front bumper
Body line added to cab corner
Rear fenders widened to allow wheel fitment
Sir micheals roll pan modfied to bolt on
Bed floor covered with sheetmetal
All inner bed panels are steel with a stepped edge
over 400 stainless allen heads in the bed
All suspension tubing 1.75 .120 wall
frame notch is double walled and fully welded
Air Ride Tech control arms
Air Ride Tech big red valves and bags
10 gallons of on board air
2 viar 450 compressors
Suicide doors custom built 4 link 1.5 in .250 wall link bars
Optima Red Top battery
Rockford Fostage power series stereo compents
2 10's, 2 6.5"s, 2 4x6's
Kenwood flip out in dash TV
hornblasters.com train horns
rebuilt trans 25k miles
rebuilt rear end with locker 4k miles
454 ci BBC per prior owner it was rebuilt(bearings, rings, pistons, at 102k miles)
Truck now has 154k
ceramic coated headers w/3' mandrel bent dual exhaust flowmaster mufflers
ride height is about 5in and the crossmember truck does just barely lay frame and sits on bump stops all the way around.
Color is a factory Ford White
Windows are tinted
satin black window surround painted on the truck.
25k OBO
Travis Ball
479-426-3462
www.kdhotrods.com