PDA

View Full Version : 64 Chevelle rear suspension


bowtie_nut
01-30-2009, 08:40 PM
Does anyone know how the factory suspension will perform if the lower control arms are moved in 3" per side to accommodate larger tires?

camcojb
01-30-2009, 08:44 PM
mine was minitubbed 3" per side, handles very well.
http://www.camcojb.com/temp/malitude%20245.jpg


Jody

ProdigyCustoms
01-30-2009, 08:46 PM
We did Bills GTO, works well. We used a set of Hotchkis arms and a QA1 Crossmember kit

bowtie_nut
01-30-2009, 08:51 PM
I was a little concerned when Moser said that they would narrow the axles and tubes, but they would not weld on the brackets. Glad to here that it as already been done with success. Jody where did you get your rear sway bar at?

camcojb
01-30-2009, 08:52 PM
I was a little concerned when Moser said that they would narrow the axles and tubes, but they would not weld on the brackets. Glad to here that it as already been done with success. Jody where did you get your rear sway bar at?


custom made, Mark Stielow had it done.

Jody