Resivoir for hydro brake system

[bigtyme1]

any ideas? I need 3 outlets and it has to be vented. something that mounts on the core support or inner fender.

[deuce_454]

any ideas? I need 3 outlets and it has to be vented. something that mounts on the core support or inner fender.

you need an outlet for the pump (if you arent using a standard saginaw pump) and one or two returns.. (if you run one return you will need to use a tee fitting to connect both the steering and booster low pressure returns..)

[bigtyme1]

I have the pump that came with my march pulley set up.

[deuce_454]

I have the pump that came with my march pulley set up.

i made that same mistake:-(

i believe it can be fixed by tee'ing from the low pressure return to the bottom outlet of a single outlet reservoir on the radiator core support level with the march reservoir... that way you are increasing the available volume...

[XcYZ]

Mark, somebody makes the exact reservoir that you're talking about, it's a really nice, fabricated piece... but for the life of me, I can't recall who makes it.

[VP23271]

I know Kugel Komponents makes a single, double and triple reservoir, but I don't know if it would work for your application or if it has enough capacity.

I was planning on using the single for my hydraulic clutch.

http://www.kugelkomponents.com/products/accessories/accessories.html

[bigtyme1]

Billett specialties said they have a few but I want to make sure I'm getting the right thing.

[novaracer]

http://www.pscmotorsports.com/reservoirs-brackets-reservoirs-for-hydroboost-c-161_223.html
I have this one its very nice...
BC