camcojb
01-28-2009, 07:17 PM
Like new Touring Classics C5 brake upgrade for 64-72 Chevelle with B car or ATS spindle (will not work with stock spindle). Less than 1000 miles on calipers, look unused. 13" Baer Eradispeed 2-piece rotors, late model GM 4 wheel disc aluminum master cylinder, 9" booster. Rotors, master, and booster were put on new in 05 when Mark Stielow built the car, might have a couple thousand miles on them.
I upgraded to ATS spindles and was told I'd need new brakes up front, so I bought the spindles and brakes from Tyler. Turns out the car already had Baer C5 brakes (not C4 like Tyler thought), so I now have two sets of the same brakes. I'm keeping the older Baers to match the Baers on the rear, and am selling the new Touring Classics, exact same pieces. The Baer hubs for the B car spindles are also included, not shown in pics.
$650 shipped for everything to the lower 48.
http://www.camcojb.com/temp/100_0514.jpg
http://www.camcojb.com/temp/100_0515.jpg
http://www.camcojb.com/temp/100_0516.jpg
http://www.camcojb.com/temp/100_0517.jpg
http://www.camcojb.com/temp/100_0518.jpg
Jody
I upgraded to ATS spindles and was told I'd need new brakes up front, so I bought the spindles and brakes from Tyler. Turns out the car already had Baer C5 brakes (not C4 like Tyler thought), so I now have two sets of the same brakes. I'm keeping the older Baers to match the Baers on the rear, and am selling the new Touring Classics, exact same pieces. The Baer hubs for the B car spindles are also included, not shown in pics.
$650 shipped for everything to the lower 48.
http://www.camcojb.com/temp/100_0514.jpg
http://www.camcojb.com/temp/100_0515.jpg
http://www.camcojb.com/temp/100_0516.jpg
http://www.camcojb.com/temp/100_0517.jpg
http://www.camcojb.com/temp/100_0518.jpg
Jody