View Full Version : GM Ramjet into '69 Chevelle?
gearheadgarage
12-12-2008, 09:01 PM
Surely somebody must know if a GMPP Ramjet will fit on a big block 496 in a '69 Chevelle SS and still provide hood clearance on a stock Super Sport hood?
Anyone seen it done? Any feedback would be GREATLY appreciated.:question:
camcojb
12-12-2008, 09:07 PM
Surely somebody must know if a GMPP Ramjet will fit on a big block 496 in a '69 Chevelle SS and still provide hood clearance on a stock Super Sport hood?
Anyone seen it done? Any feedback would be GREATLY appreciated.:question:
on a cowl hood it clears, look like it has enough room to clear with an SS hood. Not sure, but they may have cut the plenum a bit, don't remember.
http://www.lateral-g.net/sandlin69chevelle/002.jpg
http://www.lateral-g.net/sandlin69chevelle/003.jpg
more pics:
http://www.lateral-g.net/sandlin69chevelle/
Jody
gearheadgarage
12-13-2008, 09:24 AM
Thanks Jody.....sure looks like it might fit. Anyone else have any good input?
From what I can tell from GM specs, it will be close, but I do NOT want to swap out the SS hood!:(
gearheadgarage
12-18-2008, 06:33 PM
For those that may have any interest: the Ramjet will not fit into a '69 w/ stock SS hood. Intake height is 11" which is too high.....S&P offers one cut down to 10" but still too tall.
Decided to run a tuner special from Edelbrock: 1600cfm throttle body kit, Victor Jr. intake w/ injectors & fuel rails. Running a GM computer (circa 1990) cuz it has the best tunability.
Should run like a raped ape: Dart Pro1 heads, .650 lift cam, big duration.....:unibrow:
I admire your insistence on keeping the SS hood. It's a great looking hood and would be a bigger compromise to swap than swapping the intake even if it might be easier or cheaper.
gearheadgarage
12-18-2008, 09:02 PM
Thanks- it's not usually the easiest route, but staying a bit subtle (visually) is important to us. Sometimes, it's what you don't see that is most impressive. Gaudy hoods really detract from the aesthetic appeal of really clean cars IMO.:thumbsup:
tones2SS
12-19-2008, 04:55 AM
The stock hood would look cool, but the cowl looks so much "meaner".
Especially with a Ram Jet under the hood. Just my opinion.:thumbsup:
vBulletin® v3.8.11, Copyright ©2000-2025, vBulletin Solutions Inc.