Hammer motor for sale

[TOM NELSON]

Eric the owner of the famous Pure Vision Hammer has asked me to to post up that the Procharged 500 inch Wedge motor that has been powering it is for sale.Chrysler wanted to debut there new 572 Hemi in his car so thats his new motor. The motor comes complete with water pump,alternator,ac compressor,pwr steering all the drive accesories and pulleys.Supercharger store Procharger kit.It does not have the fast ecu injectors or throttle body though.The motor is based on a 400 low deck with aftermarket steel caps and a 4340 stroker crank with mopar perf aluminum heads.Eric asking 7500.00 so if anyones interested give him a call at 1626-674-3467 here are some links of it on the dyno making 750 hp http://www.nelsonracingengines.com/videos/blown/500BBMOPARBLOHIGH.wmv and another running in the car http://nelsonracingengines.com/videos/hammerhigh.wmv

[Flash68]

One of my favorite cars of all time!

[TOM NELSON]

Thanks for fixing the post Jody

[camcojb]

Thanks for fixing the post Jody

no problem sir............... :thumbsup:

Jody

[TOM NELSON]

bump bump

[TOM NELSON]

Erik has now lowered the price to 7500.00 so if anyone is interested give him a call.It just sitting is stropes shop waiting for a new home.1626 674 3467

[reedster]

The motor is still available, but without the supercharger. Open to offers. You can reach me at 626 674-3467. Thanks, Eric

[reedster]

The motor is still sitting over at Strope's shop minus the supercharger. If anyone is interested, I'm very flexible on the price. I just would like to get it sold. And I'm sure Steve will be happy when it no longer occupies the corner in his shop.

thanks!

[Flash68]

The motor is still sitting over at Strope's shop minus the supercharger. If anyone is interested, I'm very flexible on the price. I just would like to get it sold. And I'm sure Steve will be happy when it no longer occupies the corner in his shop.

thanks!

What's in the Hammer now?

[Shmoov69]

Is $7,500 the price with or without the blower?

[eric36]

I have a 70 satellite sitting in the garage that would love to have this motor, too bad I have no $$$ :(

[reedster]

Sorry guys, I should have provided more info. Let me try this again:

I'm relisting for $4000 OBO.

The motor is based on an early Mopar 400 CI Wedge low deck block with aftermarket steel caps and a 4340 stroker crank and Mopar performance aluminum heads.

Mopar Performance Forged Crankshaft 4340 Steel
Mopar Performance Full Roller Valve Train
Mopar Performance Stage VI Aluminum Heads

The motor comes complete with water pump, alternator, AC compressor, power steering, all the drive accessories and pulleys. It DOES NOT have the fast ECU injectors, throttle body, or Supercharger.

This motor was built by Nelson Racing Engines of Chatsworth, CA.

Here are some links of it on the dyno making 750HP (with the Supercharger)
http://www.nelsonracingengines.com/videos/on-the-dyno/NRE-Blown-500cid-Mopar.html

And another running in the car:
http://www.nelsonracingengines.com/videos/test-drive/1970-PureVision-NRE.html

The motor was only in the car for about 1000 miles before being replaced with a Hemi. It's a great motor at a great price. Cost thousands more to build.

[reedster]

Motor is SOLD