502 BBC/ t-56/ Ron Davis Rad

[Yenkostyle]

I have a baby on the way and trying to get things ready for her so I am selling the motor and trans...

Brand new dyno time only:
BBC GEN VI ZZ502
Pro Systems 950 HP Carb
fully ported angle milled Alum heads
Zero deck block
RPM port matched Eldelbrock air gap intake
Comp Cams 240/248 @ .050 .613 int and .647 ex on 112in @109 hyd roller
Comp Cams Beehive springs
Roller rockers
MSD distributor and wire set
2 inch primaries Hooker super comp 69 Camaro headers
Lakewood bellhousing
McLeod 12 inch kevlar clutch 260873
McLeod pressure plate 360820

604 HP @6100
608 Ft lbs @4400
this was all done in Colorado Springs CO at an altitude of about 6000ft above sea level.

Average between 3700-5500: HP 515.6 TRQ588.8

I’ve spent over $11,000 in this engine.

Will sell for $7000.00
I am located in Colorado Springs and will deliver motor within 500 miles.

T-56 with adaptor plate: for a SBC/BBC bell housing.

Brand new never run you can find out more info here:

http://store.summitracing.com/partdetail.asp?part=cmg-1386000011

$2000 firm


Ron Davis BBC Radiator:

Dual fan, shroud, and recovery tank all in one: SOLD SOLD SOLD

Pm me with email and I will send pics if interested...

V/R

Tony

[Lenie]

Tony, I'll buy the radiator. I'll pm you with my phone number or you can send me yours.
Thanks Lenie

[Yenkostyle]

http://i53.photobucket.com/albums/g72/Yenkostyle/engine054.jpg

http://i53.photobucket.com/albums/g72/Yenkostyle/MyDoggies001.jpg

http://i53.photobucket.com/albums/g72/Yenkostyle/transandrad001.jpg

http://i53.photobucket.com/albums/g72/Yenkostyle/transandrad007.jpg

[Yenkostyle]

TTT for the weekend

[Yenkostyle]

Still for sale; any takers?

[CE69]

This is the motor I am going to use on my project, except yours has more hp and torque! These things always come up when your not ready for them. In the process of paint and body at this point. Hmmmmm Paint or Motor, Paint :_paranoid Motor?? Killer deal by the way. I wish I was closer and to that point in my build.

[Yenkostyle]

Engine for $7000

[boonedog]

can i get some more pics of the engine sent to [email protected] Who built the engine?

[g-lee10]

I see you are at the USAFA. I'm at Cannon AFB and very interested in the motor. Can you post some more pics of the motor and, just to confirm, you bought the ZZ502 brand new?
I have a 502 HO in my 69 Camaro now and am ready to upgrade.

Gary

[Yenkostyle]

I see you are at the USAFA. I'm at Cannon AFB and very interested in the motor. Can you post some more pics of the motor and, just to confirm, you bought the ZZ502 brand new?
I have a 502 HO in my 69 Camaro now and am ready to upgrade.

Gary

Gary,

It was a brand new zz502 when I bought it and without ever starting it I took it to a local machine shop and had them make the modifications. the only run time is what was done on the dyno.

If you hit me up with your email I will send you a ton of build pics and current ones.

Just let me know,

Tony

[jpdeuce]

Tony, I just sent you a pm about your motor. I've got a guy very interested in it.

Thanks,
Jeff

[Yenkostyle]

FYI,

All items are sold, thanks to everyone for their intrest.

Tony