68 Convertible (Resurrection) [Archive]

speedfreak

11-01-2008, 09:32 PM

Here it is..
Most people would have let it die a peaceful death.
But.. being the Frankenstein doctors of metal that we are we decided to resurrect it from the grave.

But seriously this thing was rough. Someone said it couldn't be done so here goes.
All work is being performed at our shop SCREAMIN' PERFORMANCE in Sunny Merritt Island, FL

I will have a rendering soon.
I will post more info soon.

Hope you enjoy
thanks,
Brian

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_1884.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_1876.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_1879.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_1878.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_2403.jpg

speedfreak

11-01-2008, 09:33 PM

Here is what was left after sand blasting.

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_3147.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_3138.jpg

speedfreak

11-01-2008, 09:34 PM

In primer and fitting some sheet metal.

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_3406.jpg

[IMG]http://i7.photobucket.com/albums/y299/screamindemon1/IMG_3384.jpg[/IMG

speedfreak

11-01-2008, 09:35 PM

Lower A pillar repair.

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_3414.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_3416.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_3421.jpg

Repair panel is too narow at the jam so I had to split it and weld it up.

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_3425.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_3426.jpg

speedfreak

11-01-2008, 09:36 PM

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_3513.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_3518.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_3508.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_3525.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_3529.jpg

speedfreak

11-01-2008, 09:38 PM

Quarter support repairs.

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_3466.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_3469.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_3467.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_3473.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_3485.jpg

speedfreak

11-01-2008, 09:39 PM

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_3477.jpg

speedfreak

11-01-2008, 09:40 PM

Rockers welded in.

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_3614.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_3615.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_3621.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_3623.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_3629.jpg

speedfreak

11-01-2008, 09:40 PM

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_3636.jpg

speedfreak

11-01-2008, 09:41 PM

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_3647.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_3643.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_3648.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_3645.jpg

speedfreak

11-01-2008, 09:42 PM

We are fitting the MCC custom frame rails ,trunk and floor.

After a lot of measuring we determined the 68 trunk reproduction part is just under 3/4 of an inch short end for end.
I had to cut it and will add to it.

Also the lower section was cut out to make way for the MCC rails and 19/355 meats.

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_3674.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_3677.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_3679.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_3678.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_3680.jpg

speedfreak

11-01-2008, 09:44 PM

We started fitting the quarters and tail panel today.
After finding that the reproduction trunk floor was 3/4 to short I wanted to be sure we had our front to back measurement right before welding the trunk floor, rails and floor.

I'm pretty happy with the fit but with most repro parts it's going to need some tweaking.

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_3726.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_3730.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_3740.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_3738.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_3759.jpg

speedfreak

11-01-2008, 09:45 PM

couple more

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_3731.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_3725.jpg

Lots of room for 355/19 meats :cool:

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_3755.jpg

awr68

11-01-2008, 10:14 PM

Awesome!! See they all can be saved!! :thumbsup: :hail:

radrambler

11-01-2008, 10:40 PM

wow

amazing to see what can be done .
looks like you guys do nice work...thanks for all the pics .
great to see another one saved
build plan is ? big tires and ?

radrambler

DOOM

11-01-2008, 10:40 PM

Love to see them come back from the dead!!!!!!!!! Awsome :bow: 355's yea!!!!!!!!!!! LOVE THOSE MCC RAILS

Mario

Reckley

11-02-2008, 05:23 AM

speedfreak

11-03-2008, 06:07 PM

Thanks for all the kind words guys.

Plans right now are Blown LSX, narrowed nine, TKO 600.

speedfreak

11-03-2008, 06:11 PM

Amazing work, WOW!! The patches you welded in and metal finished look outstanding!

Let us know what tweaking will be required to get the re-pop quarter panels to fit. I'd love to see what's required.

Mike

I will.
So far I noticed the deck lid gap is almost 1/2 too wide at the rear with the quarters fit. Will need some tweakin.

comp-spec

11-03-2008, 06:13 PM

nice work, thats how I like to see it done

brownz

11-03-2008, 06:20 PM

GREAT work.. Its cool that your saving another car, but on the other hand its sad to see a car in that shape but not for long.:thumbsup:

speedfreak

11-04-2008, 06:32 AM

nice work, thats how I like to see it done

Thanks Man

Love the flamed 67 you build, Beautiful :thumbsup:

speedfreak

11-08-2008, 05:15 PM

GREAT work.. Its cool that your saving another car, but on the other hand its sad to see a car in that shape but not for long.:thumbsup:

Thanks,
Yeah it is sad but she will be better than new soon. :thumbsup:

dmc69

11-08-2008, 05:20 PM

Wow! Nice work, cant wait to see more.

speedfreak

11-09-2008, 02:48 AM

Fitting outer wheel houses and drop offs.

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_3816.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_3818.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_3819.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_3824.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_3823.jpg

speedfreak

11-09-2008, 02:48 AM

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_3820.jpg

speedfreak

11-17-2008, 06:57 PM

Picked up another 68 vert.

Check out the snow tires. :D

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_3897.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_3894.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_3907.jpg

rlplive

11-17-2008, 07:23 PM

Did you buy that for the winter? Looks like it will get around good.

waynieZ

11-17-2008, 07:54 PM

Hey don't knock it I think I had a picture of my 69 Z28 with snow tires. You think their fun in the summer ,try driving it in the North East with 4:88's and a big cam YAHOO!
Wayne

awr68

11-17-2008, 08:07 PM

Is that a tow hook below the DS tail light?

speedfreak

11-18-2008, 05:13 PM

Here is the rendering that Kris Horton is working on.

It is a work in progress but I am very happy with Kris's work.

Lookin awesome.:thumbsup:

We are playing with the lower grill. Still not quite there. I have asked him to raise it up closer to the upper grill and see how that looks.

I like the one on top the best.

What do you guys think?

Brian

http://i7.photobucket.com/albums/y299/screamindemon1/ScreaminCamaroLGV3.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/ScreaminCamaro2.jpg

comp-spec

11-18-2008, 05:42 PM

The top one, raise the lower alittle..... A+
That looks awesome, That one grabbed me good

01somta

11-18-2008, 06:14 PM

That is beautiful!!

DOOM

11-18-2008, 07:43 PM

Brian either one is perfect!!!!!!:wow:
Mario

awr68

11-18-2008, 08:35 PM

Top pic!

NOT A TA

11-18-2008, 08:54 PM

I like the top pic.

Back in the mid 70's I also drove a 68 in the New England winters. Snows are a MUST! The G60's just floated on top, fun for parking lot sliding 360's though!

Young Gun

11-19-2008, 07:21 AM

second raised about an inch...would look sick as hell

waynieZ

11-19-2008, 02:46 PM

I like them both, but the bottom one looks more aggressive. I say #2
Wayne

speedfreak

11-19-2008, 05:47 PM

Thanks for the replies.

I think I like the top one better, still waiting on an up date with it raised.

Brian

speedfreak

11-20-2008, 03:25 PM

Here it is raised a little.

I think it may need to go up a little more.

http://i7.photobucket.com/albums/y299/screamindemon1/ScreaminCamaroUpdate3.jpg

speedfreak

11-21-2008, 05:35 AM

I think we got it now. Moved the grill up a little more.

I like it.

http://i7.photobucket.com/albums/y299/screamindemon1/ScreaminCamaroUpdate51.jpg

Sales@Dutchboys

11-21-2008, 06:12 AM

WOW! amazing work, Awesome rendering!:thumbsup:

Paul

waynieZ

11-21-2008, 08:56 AM

It looks sweet!

speedfreak

11-26-2008, 05:32 PM

Here are some updated pics.
I just wasn't happy with the 68 repro trunk so I scrapped it and put in a 67.

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_3938.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_3935.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_3934.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_3939.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_3931.jpg

GHOSTDANCER

11-26-2008, 05:42 PM

Excellent progress. Looks good :thumbsup:

speedfreak

11-28-2008, 07:20 PM

Excellent progress. Looks good :thumbsup:

Thanks :thumbsup:

murtah

11-30-2008, 03:52 PM

Amazing work. I'm impressed with these uni-body resurrections.

I passed on buying a 69 vert out of Louisiana because I worried the tub would need sheetmetal surgery like this car.

awr68

11-30-2008, 04:46 PM

rendering looks great now...I like the changes!!

What's differant between the two trunk floors?

speedfreak

11-30-2008, 06:52 PM

Here are a couple updated pics.
I got the trunk welded in and am notching for the tubs

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_3942.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_3956.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_3955.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_3941.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_3943.jpg

speedfreak

11-30-2008, 06:53 PM

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_3950.jpg

speedfreak

11-30-2008, 07:00 PM

rendering looks great now...I like the changes!!

What's differant between the two trunk floors?

The 68 trunk floor didn't fit. It was 1/2 to 3/4 too short end for end and the contour did not fit the rails correctly.

awr68

11-30-2008, 09:10 PM

The 68 trunk floor didn't fit. It was 1/2 to 3/4 too short end for end and the contour did not fit the rails correctly.

Interesting! Thanks!!

speedfreak

12-01-2008, 05:39 PM

Floor prepped and fit.

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_3961.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_3965.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_3968.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_3964.jpg

speedfreak

12-07-2008, 03:30 PM

Looks great Brian, so are you going to have it done for the Power Tower 2009?

Jeff

http://www.kodakgallery.com/67rscamaro

Man I would love to do the power tour.

Well see how it goes. :thumbsup:

speedfreak

12-09-2008, 06:40 PM

I made some progress today.
Got my closeouts welded in for the mini tubs.

I also started fitting my firewall jig so I can prep the cowl and firewall to weld in.

Brian

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_3976.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_3977.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_3978.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_3980.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_3982.jpg

speedfreak

12-09-2008, 06:42 PM

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_3983.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_3986.jpg

speedfreak

12-10-2008, 07:26 PM

I got the firewall and cowl welded in today and will hopefully weld in the floor tomorrow.

It is really starting to take shape now.

Brian

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_3987.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_3988.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_3989.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_3990.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_3991.jpg

speedfreak

12-10-2008, 07:27 PM

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_3993.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_3994.jpg

GHOSTDANCER

12-10-2008, 09:55 PM

Thanks for sharing your build. It looks great :thumbsup: :cheers:

MCC

12-13-2008, 03:23 PM

Brian,

The old rag top is looking GOOD !!! It's good to see Mike's Custom Cars new rear frame rails in the back ... Room for Big Tires !!!!

Keep up the good work!!!

bigtyme1

12-13-2008, 03:40 PM

Brian,

The old rag top is looking GOOD !!! It's good to see Mike's Custom Cars new rear frame rails in the back ... Room for Big Tires !!!!

Keep up the good work!!!

Good to here from you buddy.

mazspeed

12-13-2008, 03:51 PM

Wow, incredible metal work.

speedfreak

12-15-2008, 05:29 PM

Thanks guys.

Yeah Mike gotta go big, right ?:D

speedfreak

12-15-2008, 08:13 PM

Got the floor welded in.

Starting to resemble an Car again.:D

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_3999.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_4003.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_4007.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_4009.jpg

speedfreak

12-15-2008, 08:16 PM

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_4011.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_4008.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_4014.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_4013.jpg

MCC

08-20-2009, 06:10 AM

Brian,

Hows the old rag top coming ?

waynieZ

08-20-2009, 06:44 AM

Its been a while we need pictures.

speedfreak

02-01-2011, 07:54 PM

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_4408.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_4409.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_4406.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_4410.jpg

speedfreak

02-01-2011, 07:55 PM

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_4411.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_4412.jpg

speedfreak

02-01-2011, 07:56 PM

Here are some updated pics of the inner tulips in primer.

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_4452.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_4453.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_4454.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_4455.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_4456.jpg

speedfreak

02-01-2011, 07:58 PM

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_4467.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_4466.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_4487.jpg

speedfreak

02-01-2011, 07:59 PM

It's been awhile since I updated so here goes.

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_5497.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_5520.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_5525.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_5893.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_5889.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_5881.jpg

speedfreak

02-01-2011, 08:00 PM

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_5914.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_5911.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_5930.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_5931.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_5938.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_5936.jpg

speedfreak

02-01-2011, 08:01 PM

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_6009.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_6007.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_6011.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_6010.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_6019.jpg

speedfreak

02-01-2011, 08:02 PM

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_6015.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_6018.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_6017.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_6016.jpg

speedfreak

02-01-2011, 08:02 PM

I got the pass side tub tacked in today.

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_6024.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_6026.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_6027.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_6030.jpg

speedfreak

02-01-2011, 08:03 PM

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_6035.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_6038.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_6032.jpg

speedfreak

02-01-2011, 08:04 PM

Made a little progress on the trunk close outs.

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_6083.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_6084.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_6085.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_6088.jpg

speedfreak

02-01-2011, 08:05 PM

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_6087.jpg

speedfreak

02-01-2011, 08:06 PM

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_6096.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_6098.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_6099.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_6101.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_6102.jpg

Couple more pics of the close outs.

Brian

speedfreak

02-01-2011, 08:06 PM

I got the closeouts welded in the trunk today. Here are some pics.

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_6105.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_6106.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_6107.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_6104.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_6109.jpg

speedfreak

02-01-2011, 08:07 PM

Here are some updated pics with the trunk closed out and tubs clamped in.

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_6155.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_6156.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_6157.jpg

http://i7.photobucket.com/albums/y299/screamindemon1/IMG_6152.jpg

speedfreak

02-01-2011, 08:08 PM

I just picked up this US tail light panel from Heartbeat. This is a very nice peice !

If anyone is interested I feel this panel is well worth the cash. Much thicker and crisper lines !

http://www.jaclynsuzann.com/screaminperformance/gallery/Current%20Projects/68%20Vert%20Resurrection/slides/IMG_4994.JPG

speedfreak

02-01-2011, 08:10 PM

Just thought I would update this thread for those that are interested.

Thanks,

Brian

KPC67

02-01-2011, 08:14 PM

Wow, looking very nice!
How much more room do the frame rails give you over DSE's tubs?

speedfreak

02-01-2011, 08:18 PM

Wow, looking very nice!
How much more room do the frame rails give you over DSE's tubs?

Thanks, :) I gained 4 inches over stock.

Brian

KPC67

02-01-2011, 09:28 PM

Thanks, :) I gained 4 inches over stock.

Brian

Thats impressive.
Your car is going to be amazing.

speedfreak

02-02-2011, 05:24 AM

Thanks Kevin :thumbsup:

waynieZ

02-02-2011, 01:59 PM

Its coming out great! Nice progress. Nice job on the tubs.

tones2SS

02-02-2011, 04:50 PM

Very nice. Great job.
Keep us posted.:thumbsup:

speedfreak

02-02-2011, 09:16 PM

Thanks guys !

87SS

02-03-2011, 05:02 PM

:thumbsup:

I wish your shop was close to me.....I would like to get some stuff done !

Good Luck

waynieZ

02-03-2011, 06:14 PM

NJ to Florida , only a short drive.lol

speedfreak

02-03-2011, 06:16 PM

:thumbsup:

I wish your shop was close to me.....I would like to get some stuff done !

Good Luck

Thanks ! :thumbsup:

Nothing like a nice vacation to Florida to get away from that nasty cold weather you guys are getting. :yes:

Brian