PDA

View Full Version : REDUCED PRICE!! LS7 Powered 66 Chevelle, '08 Car Craft SMOTY


66LS7
10-17-2008, 08:59 PM
I am selling my 66 Chevelle Popular Hot Rodding cover car, Car Craft SMOTY winner, & August Lateral-G feature car. The Chevelle is an example of some of the best products out there in a classic looking car. The car was done on a rotisserie to show quality standards, all the door, trunk , & hood gaps are awsome. The bottom of the car as nice as the top. I used a Schwartz chassis with Wilwood 6 piston 13in. fronts & 4 piston 12in. rears, all lines are braided stainless with stainless hardlines. I also used a Wilwood master cylinder for the brakes & clutch. I used double adjustable QA1 coil overs, Heim joints, & clevises. The steering is controlled by an AGR Performance rack. I chose to clone the car as a 66 SS 427 Chevelle so the best choice for power train would be a LS7 making 472 HP & 440 FT. LBS. tourqe at the rear tires,(have the dyno sheets). I wanted everything behind the engine to be able to handle more than what the engine put out so I installed a Rockland Standard Gear "Son Of Trazilla" T56 trans. The Colman racing aluminum drive shaft conects you to the aluminum centered Winters rear end with pressed & bolted axle tubes. The Randy's Ring & Pinion aluminum 3rd member houses a tru-trac posi unit with 4.11 gears which with the 6spd sends you down the road at 2000rpm at 75mph, getting 21mpg with the air on. The Rick's Hot Rods custom stainless tank with internal baffeling & check ball system (which helps keep fuel at the Walbro pump under hard G's)sends the fuel to the engine via custom stainless hard lines. The exhaust system starts with a custom set of Stainless Works long tube headers flowwing into a custom built 3in. exhaust with x-pipe & Stainless Works mufflers. The bottom of the car is covered in a satin black finish to enhance the beauty of all the stainless & aluminum pieces. The rear wheel wells have been 3in. mini tubbed to allow the use of 335-30-18 Michelins & 18x12 Kinesis K18 wheels with the centers anodized black. The front tires are 275-35-18 Michelins on 18x9.5 Kinesis K18's. The engine compartment is kept low on the bling & high on performance. I also painted it a satin black to enhance the stainless & aluminum. I used a custom BeCool radiator system with spal twin fans. The dry sump tank came from Peterson Fluid Systems & is a work of art. I chose a Wegner Motorsports accesory drive system & valve covers also covered in black anodized finish. I hid the wiring as much as possible along with the coils & hoses. I used a Detroit Speed Delayed wiper system, Knobs, & battery hold down. The interior was graced with comfortable Cerullo SC leather front seats & matced rear seat. The dash is a custom piece from Rocky Mountain Dashes with Stewart Warner Performance Gauges keeping tabs on the vitals. A custom counsil houses the Vintage Air Gen4 controlls, Alpine stereo, Hurst shifter, Lokar parking brake, & power window switches. The kick panels have been custom made to hold the Focal speakers in a fiberglass well. The entire car has been lined with sound deadening (the fire wall, floor, inside doors, quarters, trunk, & under the head liner. I have no complaints about this car, & I wouldn't change a thing. The car has a total of 2,500 miles on it. I am selling because I have a 70 R/S Camaro I want to build & a 66 Rambler also. The selling price for the Chevelle is $85,000.00. This car can't be duplicated at that price. Interested parties can reach me at 1-262-347-9741 or [email protected] . I will try to attach pictures if I can I am new to this, but you can look at pictures in the members section or grab a copy of Popular Hot Rodding(Nov. issue). I can also e-mail pictures to interested parties.

http://www.lateral-g.net/members/rjohnson

Thank You Randy

Datsbad
10-18-2008, 05:03 AM
Sweet car , always loved it .
Good Luck with the sale !!

66LS7
10-18-2008, 05:55 AM
Thanks, but I can't keep everything & there are other cars to build. The person that buys this one will be getting one of a kind Chevelle.

XcYZ
10-26-2008, 06:45 AM
Awesome car, good luck with the sale. :thumbsup:

Fluid Power
10-26-2008, 12:27 PM
Good Luck!

R67Chevelle
10-28-2008, 11:54 AM
I would also list your car at www.chevelles.com

It probably would be the baddest chevelle listed.... If I had the $$$ I would buy it. a 66 would be a great addition to my 67. My brother was going to buy my chevelle and he backed out... Its a tough market out there.. Good luck and a great build...:thumbsup:

Blessings,

66LS7
02-03-2009, 04:58 AM
I still have the 66 Chevelle for sale reduced price $115,000.00

66LS7
11-24-2009, 04:36 PM
Hi everyone I am putting the Chevelle back up for sale now that I have project "Re-Peeled" up & going. I have another project to get started on along with customer cars & am limited on space. I also could use the funds for the future project & more shop equipment. The price has been reduced to $100,000.00 which is a steal for this car. I think you would have a really hard time to duplicate it for that amount in parts alone not including labor. I will probably be posting it on Ebay & also on Cars-on-line.com :thumbsup: 21090

21091

21092

21093

21094

21095

21096

21097





Thank You
Randy(D&Z Customs LLC.)
[email protected]
1-262-347-9741

tones2SS
11-25-2009, 07:49 AM
That is a great looking car. Love the color scheme.
Good luck with the sale Randy!:thumbsup:

syborg tt
11-25-2009, 08:07 AM
Randy I didn't know this was your car.

Very impressive looking car. I was up and under at the GG Joliet show last year.

66LS7
11-26-2009, 10:40 AM
That is a great looking car. Love the color scheme.
Good luck with the sale Randy!:thumbsup:


Thanks, I wan't to make the car look as much like an original as I could then have all the high tech & performance hidden under. I really like this car but I can't keep them all.


Randy(D&Z Customs LLC.)
[email protected]
1-262-347-9741

66LS7
11-26-2009, 10:45 AM
Randy I didn't know this was your car.

Very impressive looking car. I was up and under at the GG Joliet show last year.

Hi Marty, The Chevelle was my first official D&Z Customs LLC. build. I had other cars that I built but I didn't have a business at that point.


Randy(D&Z Customs LLC.)
[email protected]
1-262-347-9741:lateral:

syborg tt
11-26-2009, 05:14 PM
Hi Marty, The Chevelle was my first official D&Z Customs LLC. build. I had other cars that I built but I didn't have a business at that point.


Randy(D&Z Customs LLC.)
[email protected]
1-262-347-9741:lateral:

Nothing like making a Statement on your first build.

66LS7
11-27-2009, 09:02 AM
Nothing like making a Statement on your first build.

I really wanted to show the quality of our work in something subtle. I think we acheived it with this car. We now followed it up with project "Re-Peeled".



Thank You
Randy(D&Z Customs LLC.)
[email protected]
1-262-347-9741

Van B
11-27-2009, 03:38 PM
You'll be in luck when that giant pile of cash falls out of the sky on me now that II Much and Camaro X are sold. :thumbsup:

Love the car, wish I had the $ to take it off your hands.

66LS7
11-27-2009, 08:14 PM
You'll be in luck when that giant pile of cash falls out of the sky on me now that II Much and Camaro X are sold. :thumbsup:

Love the car, wish I had the $ to take it off your hands.


Luck of the Irish? Jeff You'll have to take a trip up & check it out before it's gone.:lateral:



Randy(D&Z Customs LLC.)
[email protected]
1-262-347-9741

66LS7
11-29-2009, 05:48 PM
The Chevelle is on Ebay.

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=250539733531&viewitem=&sspagename=STRK%3AMESELX%3AIT



Randy(D&Z Customs LLC.)
[email protected]
1-262-347-9741

camcojb
11-29-2009, 05:54 PM
good luck Randy, great car.

66LS7
11-30-2009, 05:50 AM
good luck Randy, great car.



Thanks Jody, I hope to get some serious interests.:thumbsup:



Randy(D&Z Customs LLC.)
[email protected]
1-262-347-9741

66LS7
12-09-2009, 10:31 AM
Ebay almost done, lots of lookers.




Randy(D&Z Customs LLC.)
[email protected]
1-262-347-9741

70rs
12-09-2009, 10:44 AM
Hey Randy, I sure wish I was the guy with the funds for that car. Amazing machine to say the least. Best of luck with the sale. :cheers:

66LS7
12-09-2009, 02:29 PM
Hey Randy, I sure wish I was the guy with the funds for that car. Amazing machine to say the least. Best of luck with the sale. :cheers:

I guess I will have to keep it a little longer if no one comes up with the funds.



Randy(D&Z Customs LLC.0
[email protected]
1-262-347-9741

66LS7
12-16-2009, 07:27 PM
Nothing says Merry Christmas like a shiny Blue Chevelle!:D



Randy(D&Z Customs LLC.)
[email protected]
1-262-347-9741

Aschle
12-16-2009, 08:07 PM
Please feel free to leave it in my driveway with a big red bow on it for Christmas morning !!!! :thumbsup: :lol:


Jason

66LS7
12-17-2009, 03:31 PM
I will be happy to do so, just need to have bank account #'s to get sufficient funds for that really big red bow.:rofl:




Randy(D&Z Customs LLC.)
[email protected]
1-262-347-9741

chrismoe
12-19-2009, 07:53 AM
Randy,

Awesome car. Good luck with the sale.

Chris

dlouie87
12-19-2009, 01:07 PM
Do you mind I asked where did you get that air intake pipe that comes off the throttle body to the MAF.... the 90 degree one?

I'm looking for something like that but most of those are custom fabricated.

-Dan

66LS7
12-19-2009, 01:15 PM
Don't mind at all, I made the intake myself out of 4" aluminum pipe.





Randy(D&Z Customs LLC.)
[email protected]
1-262-347-9741

dlouie87
12-19-2009, 03:31 PM
Don't mind at all, I made the intake myself out of 4" aluminum pipe.





Randy(D&Z Customs LLC.)
[email protected]
1-262-347-9741

Thanks.

I just wish I had all the tools to bend alum. piping. haha...

coolwelder62
12-19-2009, 03:56 PM
Randy i love your car hope the owner knows what they are really getting.Tons of time in the fab work.good luck.:thumbsup: :thumbsup: :thumbsup:

66LS7
12-20-2009, 07:47 AM
Randy i love your car hope the owner knows what they are really getting.Tons of time in the fab work.good luck.:thumbsup: :thumbsup: :thumbsup:


Thanks, it's a labor of love that we all have when we build these cars.:lateral:




Randy(D&Z Customs LLC.)
[email protected]
1-262-347-9741

cmraman
12-22-2009, 02:47 PM
Thanks, it's a labor of love that we all have when we build these cars.:lateral:




Randy(D&Z Customs LLC.)
[email protected]
1-262-347-9741

That doesn't describe enough the amount of detail that is in the car. Not only does it look great, it performs also. If I had the cash, it would be sitting in my garage.

66LS7
12-26-2009, 03:49 PM
That doesn't describe enough the amount of detail that is in the car. Not only does it look great, it performs also. If I had the cash, it would be sitting in my garage.

Thanks Rob, I,m really happy how the car turned out I wouldn't change a thing. I also think it would look great in your garage next to the Olds.:lol:


Randy(D&Z Customs LLC.)
[email protected]
1-262-347-9741

66LS7
12-28-2009, 03:37 PM
I still have the Chevelle for sale would make a great car to go into the New Year with!!:thumbsup:




Randy(D&Z Customs LLC.)
[email protected]
1-262-347-9741

buickfunnycar.com
12-28-2009, 04:20 PM
Love them 66's and yours is amazing...:hail:

cmraman
12-28-2009, 07:05 PM
I still have the Chevelle for sale would make a great car to go into the New Year with!!:thumbsup:




Randy(D&Z Customs LLC.)
[email protected]
1-262-347-9741

Anyone who gets this car will be a very lucky person. Great car Randy, good luck with the sale. I hope it works out for you.

66LS7
12-30-2009, 02:35 PM
Anyone who gets this car will be a very lucky person. Great car Randy, good luck with the sale. I hope it works out for you.



Thanks Rob, I appreciate the comments it will be a great car for someone that will do it all (street or track).:thumbsup:


Randy(D&Z Customs LLC.)
[email protected]
1-262-347-9741

66LS7
01-01-2010, 08:54 AM
Ready to drive & have fun for the New Year come & get it!:lateral:





Randy(D&Z Customs LLC.)
[email protected]
1-262-347-9741

cmraman
01-05-2010, 10:05 AM
Love them 66's and yours is amazing...:hail:

It's there waiting for you!

66LS7
01-06-2010, 08:06 PM
The Chevelle is on display at Milwaukee WI. World of Wheels show at the Tremec Transmissions booth, come & take a look if your in the area.:thumbsup:




Randy(D&Z Customs LLC.)
[email protected]
1-262-347-9741

nvr2fst
01-07-2010, 09:25 AM
The Chevelle is on display at Milwaukee WI. World of Wheels show at the Tremec Transmissions booth, come & take a look if your in the area.:thumbsup:




Randy(D&Z Customs LLC.)
[email protected]
1-262-347-9741

Slight hijack,
Me and me son will be heading down there. Never seen the car in person and it would be great to run into you. Is Re-peeled going to be there.

66LS7
01-07-2010, 11:00 AM
Slight hijack,
Me and me son will be heading down there. Never seen the car in person and it would be great to run into you. Is Re-peeled going to be there.

We we're unable to get both cars there, & since I am selling the Chevelle I thought that would be the best choice.:thumbsup:




Randy(D&Z Customs LLC.)
[email protected]
1-262-347-9741

70rs
01-07-2010, 01:40 PM
We we're unable to get both cars there, & since I am selling the Chevelle I thought that would be the best choice.:thumbsup:




Randy(D&Z Customs LLC.)
[email protected]
1-262-347-9741

Best of luck with the show Randy, maybe the extra exposure will get a buyer.
:cheers:

cmraman
01-07-2010, 02:06 PM
Best of luck with the show Randy, maybe the extra exposure will get a buyer.
:cheers:

Me too. I can't believe this car isn't gone already.

Van B
01-07-2010, 06:50 PM
See you guys down there whenever I get done plowing snow...

66LS7
01-11-2010, 11:05 AM
Thanks for everyone that stopped by Tremec booth at World of Wheels Milwaukee to say Hi & see the Chevelle, I did get some interested parties but it is still fdor sale.:lateral:



Randy(D&Z Customs LLC.)
[email protected]
1-262-347-9741

66LS7
01-14-2010, 06:57 PM
Still for sale, could be a great gift idea for your sweet heart on Valentines Day:unibrow: :thumbsup:


Randy(D&Z Customs LLC.)
[email protected]
1-262-347-9741

66LS7
01-17-2010, 01:32 PM
I have decided to lower the price to $85,000.00.




Randy(D&Z Customs LLC.)
[email protected]
1-262-347-9741

70rs
01-17-2010, 02:28 PM
I can not believe this has not sold yet. I thought it would have been gone a long time ago. Best of luck Randy.:cheers:

Van B
01-17-2010, 03:03 PM
I had a chance to look it over pretty good last weekend and I have to say there is really nothing you could pick apart on the car.

I too, am surprised it is still around.

66LS7
01-17-2010, 07:04 PM
I can not believe this has not sold yet. I thought it would have been gone a long time ago. Best of luck Randy.:cheers:



I did also, I lowered the price to help it along. Thanks Eric.:lateral:




Randy(D&Z Customs LLC.)
[email protected]
1-262-347-9741

camcojb
01-17-2010, 08:25 PM
I have decided to lower the price to $85,000.00.




Randy(D&Z Customs LLC.)
[email protected]
1-262-347-9741
Randy,

I edited your original post to show the new price, in case someone doesn't read all the replies. Good luck with your sale.

Jody

66LS7
01-18-2010, 07:48 AM
Thanks Jody:thumbsup:





Randy(D&Z Customs LLC.)
[email protected]
1-262-347-9741

camcojb
01-18-2010, 08:15 AM
Thanks Jody:thumbsup:





Randy(D&Z Customs LLC.)
[email protected]
1-262-347-9741
Guys, this is a fantastic price. I've seen the car personally, and spent a lot of time going over it. You know how detail oriented I am, this car is done right, period................ and at the new price is an extremely smokin' deal.

Jody

66LS7
01-19-2010, 06:24 PM
Guys, this is a fantastic price. I've seen the car personally, and spent a lot of time going over it. You know how detail oriented I am, this car is done right, period................ and at the new price is an extremely smokin' deal.

Jody


Thanks again Jody it helps to have someone like yourself to give credability to my work.:lateral:


Randy(D&Z Customs LLC.)
[email protected]
1-262-347-9741

Van B
01-19-2010, 07:35 PM
Thanks again Jody it helps to have someone like yourself to give credability to my work.:lateral:


Randy(D&Z Customs LLC.)
[email protected]
1-262-347-9741

If you've met Randy, you know he needs all the help he can get. :rofl:

66LS7
01-20-2010, 12:41 PM
If you've met Randy, you know he needs all the help he can get. :rofl:

The help from Jeff is the most precious of them all.:lateral:

Randy(D&Z Customs LLC.)
[email protected]
1-262-347-9741

camcojb
01-29-2010, 12:48 PM
someone needs to buy this car............... :yes:

Jody

tones2SS
01-29-2010, 03:23 PM
Bump for Randy.:thumbsup:

phillym5
01-29-2010, 04:00 PM
I might be out of line... because i might not know what im talking about...
But why don't you sell this car at Barrett??
Seems that with all the documentation... literature... awards... ect.. it would be right up Barretts clientel's alley.

I would guess it would bring more than what your asking... 85k is such a smokin deal for this car.....:cheers:

nvr2fst
01-30-2010, 09:24 AM
Seen the car Randy at the Milwaukee autoshow a couple of weeks ago. Very nice car and a great price.