1st Gen Convertible/Deluxe Interior Inner Quarter Panels

[68LS1]

Are there any plans to produce these to match door panels?
thanks

[Chingonrides]

We have them in stock and fit much nicer than a stock set. I will try and post a photo, of them. We are making a new catalog of production product that will be released at SEMA. See us at booth number 23589 in Hot Rod Alley.

pascual

[68LS1]

We have them in stock and fit much nicer than a stock set. I will try and post a photo, of them. We are making a new catalog of production product that will be released at SEMA. See us at booth number 23589 in Hot Rod Alley.

pascual

Hi Pascual
Any luck with pics?
Would love to visit SEMA, just a bit far from Australia :(
cheers Roger

[redfire69]

Will any of these new parts be ready for sale on you web site soon? Hint hint, dashboard and 3-D modern taillights?

:thumbsup:

[Chingonrides]

The convertible quarter sections are available now and will be on the web over the weekend. Yes, we will post the new products on lateral-g as soon as we have our photographer take nice photos.

We do have a second gen f-body package tray available now.

We will have the production 3-D taillights at SEMA and they have been changed from our old designs. We also have some new stuff for the 67-8 at SEMA. As always you can expect a innovative and quality product with attention to detail from us.

pascual

[Chingonrides]

Sorry I forgot to answere the question on the dash. It will be a production unit at SEMA this year. We have been making them for a few months now, but have not released it since we are making various machined parts to compliment the design. The current unit is designed to run autometer gages and a race pack. The gauge version is machined out of billet and has many details that are OEM like. It has turn signals, park brake, hi-beam, and can use any combination of gauges. In addition the dash pad uses round vents from vintage air and we will offer the entire unit complete with matching knobs. The unit will be available for purchase at SEMA and will fit all 67-9 f bodies. We are providing a pre-production unit to the One lap Camaro that is scheduled to be at SEMA. I will have it fully upholstered in my booth also.

pascual

[redfire69]

Hey Pascual, I'm very interested in the package tray for the 2nd gen and the 3-d lights and dash for the 1st. How could I get more info (pics/pricing) on these items? I guess they will show up on your web site some time after sema? thanks again!!

[68LS1]

Sorry I forgot to answere the question on the dash. It will be a production unit at SEMA this year. We have been making them for a few months now, but have not released it since we are making various machined parts to compliment the design. The current unit is designed to run autometer gages and a race pack. The gauge version is machined out of billet and has many details that are OEM like. It has turn signals, park brake, hi-beam, and can use any combination of gauges. In addition the dash pad uses round vents from vintage air and we will offer the entire unit complete with matching knobs. The unit will be available for purchase at SEMA and will fit all 67-9 f bodies. We are providing a pre-production unit to the One lap Camaro that is scheduled to be at SEMA. I will have it fully upholstered in my booth also.

pascual

You certainly got my interest, any pre-release spy photos ;)

[bigtyme1]

Pascal. what is the turn around time going to be? If we order at SEMA when can we expect them?

[Chingonrides]

The interior that we will display at SEMA will be a production unit. We are doing the final touches to the pre-production model now. I expect to have them in full production by SEMA and a unit fully built and assembled and to the customer in two weeks from order.

pascual

[68LS1]

The convertible quarter sections are available now and will be on the web over the weekend. Yes, we will post the new products on lateral-g as soon as we have our photographer take nice photos.

pascual

Are these photos on web site? Having trouble locating them?

thanks Roger

[Flash68]

Pascual, how about a gauge panel insert for a 68 Camaro! :thumbsup:

[Chingonrides]

We will introduce our new products starting this Monday.

We have a complete dash top and bottom that is designed for 67-9 F body. It will require removal of the entire dash to install. It is a very simple install and will only require some holes drilled and will bolt in with no welding. We have it in a car now and it is solid. This unit will be in our display 69 at SEMA.

The convertible quarter sections are production units and are available now. We will post the photos of those on Monday also. We have shipped many sets out already to customers that have requested them. We will also have the physical product at SEMA.

The 68 dash insert is something that we have considered, but have not gone past that. I will look at in detail and consider my options. I have been developing new product that does not exist in the market now and will continue to do so. In addition, we have some product that we decided to hold off on production, but has been prototyped already. I purchased a 70 Nova as a parts "Mule" and have prototyped parts for it already.

We are getting ready for SEMA now and i will make an effort to post updates as we have them. Judas has joined our team as of last month and is responsible for all Prototype and production of CNC product. He will also post new product updates.

As always we will design quality and innovative parts for Muscle cars and trucks.

pascual

[camaro2nv]

Wow I didnt know you guys were in Sac. Do you have a showroom?

[Flash68]

Thanks for the update, Pascual.

[Chingonrides]

Here you go a new 68 Camaro taillight. Details will follow.

pascual

[68LS1]

The convertible quarter sections are production units and are available now. We will post the photos of those on Monday also. We have shipped many sets out already to customers that have requested them. We will also have the physical product at SEMA.

pascual

Hi Pascual

I still cannot seem to find a pic of these on your web site, can you advise?
thanks Roger

[CG3D]

Roger -
Hope this helps - also the door panels are the same as the coupe door and quarter section package.
http://i664.photobucket.com/albums/vv3/CG3D/DSC_0676_1024x685.jpg
http://i664.photobucket.com/albums/vv3/CG3D/DSC_0677_514x768.jpg
http://i664.photobucket.com/albums/vv3/CG3D/DSC_0679_1024x685.jpg

[68LS1]

thanks

Roger