? About Acrylic Enamel Paint

[rallye455]

I painted a frame over the weekend with Acrylic Enamel and ended up with a couple runs...can I wet sand them out and buff the shine back or will it need to be resprayed after sanding?

[Brigzee]

Yes it can be cut and buffed, if you used hardner in it.

[NOT A TA]

Paint store sells a small square tool with a file type side on one side. We call it a "nib" here. It allows you to scuff off most of the drip before wet sanding, thereby preventing sanding off too much paint on each side of the drip, run, sag etc.

[rallye455]

After sanding whats the best thing to use to bring the shine back?

[V8TV]

Hit it with a little polishing compound and then some buff compound on a wool pad, just keep it SLOW and keep the heat down. We use the 3m stuff here, but I would recommend painting a test piece with the same paint, and testing the whole process on something less important just to be sure it's all going to work for you.