HoodPins at Columbus Good Guys show

[formula98]

Hello Lateral-g,

We have been working over time to bring out new products and we are going to make our first show as a company. We started HoodPins.net as members of this forum looking for something different in a hood pin. You, on this forum helped us with your advice and support. So I hope to meet all of you that will be attending the Columbus Good Guys show.

We teamed up with Jason Rushforth and designed a hood pin around one of his wheel designs and we will be showing it off at the show. If your planning on being at Columbus this weekend look us up!

Here is a peek at the new design and we have others on the way.

http://farm4.static.flickr.com/3255/2641279624_a4c380c119.jpg

Jason's renderings

http://farm4.static.flickr.com/3018/2641263208_2ccf86b16e.jpg

The Sharp shooter

http://farm4.static.flickr.com/3002/2640434145_abd30677c3.jpg

The Original

We also merged with HoodPins.Com in April and have been real busy manufacturing the original HoodPins.Com parts and a new design.

http://farm4.static.flickr.com/3060/2640527879_47feafcfb7_o.jpg

The original Hoodpins.Com parts on the Right and the new Prototype on the Left




We will be bringing our original sets and more to the show. Visit our web site or Visit us at the show!

http://farm4.static.flickr.com/3094/2641280058_0ac144d878_o.jpg

Hope to see you there!

[68protouring454]

ron,looks awesome, can the sharp shooter hood pin be bought at columbus?
see ya there

[formula98]

ron,looks awesome, can the sharp shooter hood pin be bought at columbus?
see ya there

We have another version called the Six shooter. We will only have displays of these at the show. I will offer a 10% discount to the members of this forum plus no shipping charge at the show. This will only apply to parts I have on hand. I will offer the 10% discount for the Six shooter and the Sharp shooter, but they will have to ship from my shop about 2 weeks after the show.

Here is a shot of the Six shooter

http://farm4.static.flickr.com/3082/2642604230_46d47ee0eb.jpg

[formula98]

I forgot to mention I will also have Anvil's First Gen Camaro Carbon Fiber parts on display in my booth. Drop by and see their work, they're awesome!

[ANVIL1]

Ron,

Those new hoodpin designs are really nice!!!
I wish I could be in Columbus. As you know, I was just in Ohio visting my folks. There's always next year. Thanks for representing Anvil for me!

For those who don't know Ron, you should meet him if you're going to be at the Columbus show, you won't meet a nicer guy.

Best, MaTT
ANVil:thumbsup:

[JayR]

I'm stoked to see the hoodpin sketches come to life so quickly and want to thank Ron for inviting me to take part in his company.

Can't wait to see him and the new pins and all the other Lat-g folks in Columbus!

[novanutcase]

See ya in Columbus Ron!:yes:

John

[formula98]

See ya in Columbus Ron!:yes:

John

Last year I carried around a back pack with 50 pounds of hood pins, this year I have a booth! Looking forward to catching up on your project. See ya there!

[formula98]

See ya in Columbus Ron!:yes:

John

Hi John,

Last year I carried around a back pack with 50 pounds of hood pins, this year I have a booth!:woot: Looking forward to catching up on your project. See ya there!

[formula98]

Here are shots of the Sharp shooter and the Six Shooter in BLack.

http://farm4.static.flickr.com/3087/2647963631_e5c22a5bd1_m.jpg

Sharp Shooter

http://farm4.static.flickr.com/3272/2647963319_5be0bed337_m.jpg

Six Shooter

[formula98]

We have a few versions of hood pins that are not listed on the web site, but I will have a display of our products at the Good Guys Show in Columbus. I'm also working on a new web site that will show case all of our products. I hope to have the new web site up and running by the end of July.

Here is a picture of a scuff plate that we presented to Roush Performance in May. This version is a stick on using 3m adhesive. We can do this with the locking and the original versions.

http://farm4.static.flickr.com/3112/2649785754_c512b3b5fa_m.jpg

We also have more planned for the future. Jason and I are working on another version I hope to have done in another few months. I'm also working on a design that Matt from Anvil came up with. So stay tuned and I hope to see all of you at Columbus!