Gear Position Indicator / Indicator status advice required

[*rayman*]

As part of registration requirements in Australia, vehicles are required to have an illuminated gear position on automatic shifters.

I'm running a B&M Hardcore Street Bandit shifter, and have converted my original cluster to hold 5" Autometer Speedo (hall effect sensored) and Tacho. I have also made up a bezel to hold my fuel/oil/water guages in the centre section.

http://www.fastpts.com/hazel-doc/hardcorestreetbandit.jpg

http://img255.imageshack.us/img255/6365/picture063dw6.th.jpg (http://img255.imageshack.us/my.php?image=picture063dw6.jpg)

I'm considering running this little cluster from Dakota Digital to show my gear position, and indicator/high beam/park brake status.

http://www.dakotadigital.com/cartimages/prd_sm_62.jpg
http://www.dakotadigital.com/index.cfm/page/ptype=product/product_id=62/category_id=222/home_id=59/mode=prod/prd62.htm


And the controller box for it:

http://www.dakotadigital.com/cartimages/prd_sm_60.jpg
http://www.dakotadigital.com/index.cfm/page/ptype=product/product_id=60/category_id=221/home_id=59/mode=prod/prd60.htm

Can i run this controller box ok with the linkages for the B&M?

Are there any other alternatives out there? What do you other guys do for indicator status when you convert to autometer guages? I don't particularly like the look of led's placed onto the instrument cluster. They look like a bit of an afterthought.

[MODO Innovations]

Lokar makes some that are pretty nice looking. I have no experience with these kits but I have considered using them in the past.
http://www.lokar.com/interior_pages/indicatorsboots.htm

[*rayman*]

Thanks, i like the look of the lokar units, i might consider one of these instead. Seem a little bit cheaper too.