Power rack and pinion with hydraboost

[scherp69]

Hopefully this is in the right category. Is anyone using a power rack and pinion set up and a Hydraboost system? I realize it will be alot of plumbing. I'm just wondering if you've run into any issues with it or anything you can tell me about it. Thanks.

[fvike]

I'm running that combo in my Mustang. It works great, and I have very little crosstalk between the Hydraboost and Power rack. My PS pump is a KRC unit, so is my PS fluid resorvair. I also had the resovair fitted with another -AN 6 bung for the Hydraboost low pressure return line, instead of tunning a T.

You just need to run a PS pump that can handle the task, the KRC pump can easily change the flow-valve (big blue fitting on the pump) to get the gmp you need. Also the resorvair is big enough, so that you don't pump it dry.

http://home.no.net/fvike/images/Dsc02694u.jpg
The engine bay has been washed after this picture :D

Here's a picture when I installed it, the low-pressure return line isn't in that picture, because I hadn't fitted the extra AN bung, but you get the picture.
http://home.no.net/fvike/images/Dscn0195u.jpg

Hope this helped.

[scherp69]

Thanks for the photos. They will definately help.