18x11 on my '67

[tmadden]

Anyone have any pictures of wheels this wide on the back of a 67 Camaro? Wondering if the wheels will fit if the spacing is right. Is that too wide a set up?

[68protouring454]

needs to be moni tubbed to fit anything larger then a 10 inch wide rim and a 10 is extremely tight in a stock inner wheelhouse

[DriverzInc]

And remember a 10" wide wheel measures 11" overall from outside bead to bead, so if you are measuring your own car, keep that in mind. This might be why you are thinking 11".

[tmadden]

I'm ordering Detroit Speed mini tubs next week. that was always in the plan.
Just wondered how comfortable the wheels and tires would be after that part of the process is completed. I see wheels that wide on 69's but never on a 67.

[Reckley]

I've seen both 18x11 and 12 on 67 and 68. I believe Steve Rupp's 68 has 18x12's with 335's.

[skatinjay27]

if your gonna mini tub it they just do 18x12 with 335s yea rupps bad penny has that...

[tmadden]

As always you guys were very helpful. Be blessed. I hope to post pictures soon.

[Vince@Meanstreets]

Its well worth the trouble. We narrowed the rear to make the rims fit. not 18's but 17x11

http://hometown.aol.com/gumbydmit22/images/mikes67%20161.jpg

[tmadden]

how narrow is the rear end? What length hub to hub?

[cees67]

just narrowing the rear got a 11'' under there? what about springs and shocks being moved in board?

[Vince@Meanstreets]

just narrowing the rear got a 11'' under there? what about springs and shocks being moved in board?
well yes, when you install the mini tubs all that gets moved.

[Spiffav8]

I have 18x11(10)s in the rear. They fit but it's snug!

These are the only shots I have of the rear. Not the best but I hope it helps.
http://i256.photobucket.com/albums/hh191/67OZ/Picture171.jpg
http://i256.photobucket.com/albums/hh191/67OZ/Picture170.jpg