Cold air intake

[CraigMorrison]

We finally got around to posting the pics of the cold-air intake build on the GT55. The tubing was from the muffler shop, 2 90-degree bends out of 4" tubing that was cut in the middle of the bend. The unit holding the air cleaner is from Ram Air Box up in Canada and it houses a K&N air cleaner. Either end of the intake tubes we used rubber to dampen the vibrations - if we didn't do this it could break the fiberglass air cleaner housing. We also put some stainless screen door screen at the core support to keep any big things - bugs, rocks, debris out of the cleaner housing. Enjoy the pics!

http://www.artmorrison.com/gallery/view_album.php?set_albumName=gt55-coldair