67 Ford Mustang 427 FE Tunnelport 678HP

[PCHRODS]

This is one of the cars we are working on right now. Here is some of the information on it:

1967 Ford Mustang GT500 Coupe - Shelby Protouring

Total Control Products Coil over front and rear
Baer Brakes 6 Piston
Magnaflow Exhaust
Kicker Audio System - Gotta have tunes
Ford Powertrain applications Ceramic Headers

I will post more later but.................

Most Importantly
1967 427 FE Tunnel port dyno'd at 678HP backed by a Toploader backed by a gearvendors overdrive

http://i298.photobucket.com/albums/mm244/pchrods/IMG_6662x.jpg

http://i298.photobucket.com/albums/mm244/pchrods/mustang01.jpg

http://i298.photobucket.com/albums/mm244/pchrods/mustang.jpg

http://i298.photobucket.com/albums/mm244/pchrods/IMG_6538x.jpg

http://i298.photobucket.com/albums/mm244/pchrods/IMG_6644x.jpg

[JamesJ]

cool, keep us up to date...

[Aschle]

Very nice car to be...

Jason

[CNDbowtie]

so how did you get Chip to work on it??? and whats his involvement in the build?..other then obvious of layin down the stripes :thumbsup:

[wiedemab]

Very Cool! Let's see some motor pics!

[PCHRODS]

so how did you get Chip to work on it??? and whats his involvement in the build?..other then obvious of layin down the stripes :thumbsup:

Chip is a good friend of mine and the guy whom I am building the car for. We painted the car at his shop. If you know Chip he always loves getting involved so he hopped in and layed down some stripes.

[CNDbowtie]

Chip is a good friend of mine and the guy whom I am building the car for. We painted the car at his shop. If you know Chip he always loves getting involved so he hopped in and layed down some stripes.

thats awesome...ive briefly met him twice and each time he is a true gentleman. So do you know his real name...heard it mentioned on radio interview last year where he reveiled his birthname...if i get to run into him again this year im gona get his autograph with his real name instead of Chip :_paranoid

So whats the plans of the wheels?

[FETorino]

Epecially the motor. Is it aluminum or cast iorn heads? 4v dominator, 4v 4150 ot tunnelport 8v intake? Is it a true 427 or a stroker? Are you running a roller cam? I know these guys would like to hear about the motor.

http://www.network54.com/Forum/74182/

[PCHRODS]

65 Side oiler block
XE # heads (experimental ford parts)
Solid Lifter Cam Ultradyne .670 lift / 244 duration @.050
11 to 1 JE Pistons
Dual 4 Intake
Lemans Rods
Steel Crank Stock Ford ( stock stroke )
Dynoed at 678 HP @ 7200 RPM

I will get some pictures of it this weekend and post them up here so we all can drool over it.

[PCHRODS]

thats awesome...ive briefly met him twice and each time he is a true gentleman. So do you know his real name...heard it mentioned on radio interview last year where he reveiled his birthname...if i get to run into him again this year im gona get his autograph with his real name instead of Chip :_paranoid

So whats the plans of the wheels?

His real name starts with a D, good luck getting him to sign that for you!! As far as the wheels, this one is up to Chip, We'll have to wait until the suspension is in it and on the ground to see what will look the best on it

[CNDbowtie]

His real name starts with a D, good luck getting him to sign that for you!! As far as the wheels, this one is up to Chip, We'll have to wait until the suspension is in it and on the ground to see what will look the best on it

ok then i wasnt wrong..definately started with a D..and its the same as my middle name so I`ll never forget it..lol
I`ll be interested to see Chips wheel choice! please keep the progress posted

[andrewmp6]

Should have done it red so it would look like the exp gt500 Shelby made it was a prototype coupe in 67 and he did one in 68.Here the 67 one http://www.legendarygt.com/67%20shelby%20exp%20500%20css.htm its a clone tho real one got crushed years ago.The 68 is still around tho.

[PCHRODS]

Should have done it red so it would look like the exp gt500 Shelby made it was a prototype coupe in 67 and he did one in 68.Here the 67 one http://www.legendarygt.com/67%20shelby%20exp%20500%20css.htm its a clone tho real one got crushed years ago.The 68 is still around tho.

That's a sweet car. The customer wanted blue, so it's blue. Not my car I would have done it red like the original. But it should still turn out cool.

[andrewmp6]

Heres the 68 Shelby coupe http://www.exp500.com/gallery.html if you need help finding parts or want some ideas to pass along to the owner let me know.

[two68s]

I didn't know the EXP coupe was fuel injected! I have a mustang coffee table book with some great pics of the car, but none with the air cleaner off.

[PCHRODS]

http://i298.photobucket.com/albums/mm244/pchrods/IMG_7187_detail.jpg

These were our options Boss 429 / Boss 302 / Tunnelport 427
http://i298.photobucket.com/albums/mm244/pchrods/IMG_7227_detail.jpg

This one is actually going in a 23 T bucket. If anyone has a good memory, think back to Popular Hotrodding March of 71 on the cover, This is the motor to that T bucket, and we have the T bucket too, doing a restoration on it to the way it was in 71

http://i298.photobucket.com/albums/mm244/pchrods/IMG_7200_detail.jpg

[andrewmp6]

Boss 429 ok I'm drooling now.The green hornet was fuel injection the little red was not.But the green hornet was the only Shelby mustang with a irs in it.

[two68s]

Ooh, I like the tunnel port. Do you have anymore info on the 302. I don't recognize those valve covers. I thought all Boss 302's had cleveland heads and valvecovers?

[PCHRODS]

It is an original 69' Boss 302. The valve covers are original Ford Girdled Valve Covers they attach to the actual rocker studs with 7/16" nuts. 302 Boss Motors use a "cleveland style" head, not an actual cleveland head. The boss head has a coolant crossover that goes through the intake and the cleveland head does not. :captain:

[andrewmp6]

Hes right a boss is a Windsor block the heads came out before there ever was a Cleveland engine.Ford did take the design of boss heads and put them on the Cleveland later on.Boss came out in 69 Cleveland didn't tell 70.

[two68s]

I've never seen that valve cover before, The only Boss 302 valve covers I have ever seen are the flat top production ones.

[CNDbowtie]

is that boss 302 for sale? and can we have a closer pic of the valve covers..ive never seen that style myelf..did this come out of Mustang?

[PCHRODS]

is that boss 302 for sale? and can we have a closer pic of the valve covers..ive never seen that style myelf..did this come out of Mustang?

The valve covers were an over the counter part at the Ford Dealers, back in the Early 70's. They are tough to find almost impossible. Sorry this one is not for sale. oh yeah, it was out of a mustang. I will get some closer pics for you so you can see the covers up close.

[BRIAN]

Those valve covers are ultra rare. There was a guy on EBay selling a NOS set for approx $900 which sounds expensive but I think it is also a real girdle of some sort.

They were on there for months and then they disappeared.

[PCHRODS]

wish I would have know that. Yes you are right they are extremly rare now, they use to be an over the counter part.

[BRIAN]

He had them listed like 5-8 times. I do not think they ever sold. I was wacthing them but the auction is too old and comes up blank. He had them under a Pantera heading. There was even a mention of them on a couple of the Pantera Forums. Maybe with a post you can find him as he was selling other Pantera parts.

Good luck!!

[CNDbowtie]

so give us the inside scoop...whats Chip have in the works? anything interesting? I got a chance to sit in the Foose 54 Chevy Cool-air last year..amazing car..super nice owner Mr Rydell...and he owns the Foose Grandmaster as a backup car..lol

[PCHRODS]

He is just about finished up with a totally bad ass 70 HEMI Cuda, which I believe is going to be at SEMA this year, and a 71 Cutlass convertible for Tim Mcgraw, which too should be pretty sweet. He's got other projects but they are hush hush ridler stuff, so it's kind of like christmas you can't see your presents until Christmas day, so no peeking!!!

[CNDbowtie]

He is just about finished up with a totally bad ass 70 HEMI Cuda, which I believe is going to be at SEMA this year, and a 71 Cutlass convertible for Tim Mcgraw, which too should be pretty sweet. He's got other projects but they are hush hush ridler stuff, so it's kind of like christmas you can't see your presents until Christmas day, so no peeking!!!

thanks for the info..will look forward to seeing them...i really wish Chip would have a website like some other builders like Troy Trepanier so you can see his work from start to finish...very few will ever have the inside scoop on how much fab work he has into his Riddler style creations.

[PCHRODS]

well it's been awhile since I was last on here but the car is almost done and it turned out a lot better than anticipated. The motor was a huge head ache. After sending it out for machine work we found that the heads were no good so we found an original set of 67 aluminum tunnel port heads, and then we ended up stroking the motor. Now we are pushing approx. 780 H.P. !!! The car will be in Gear Vendors Booth @ Sema next week be sure to stop by and check it out

http://i298.photobucket.com/albums/mm244/pchrods/Mustang/l_7d839071256b46dd868b1c9d0ac49935.jpg

http://i298.photobucket.com/albums/mm244/pchrods/Mustang/IMG_8893.jpg

http://i298.photobucket.com/albums/mm244/pchrods/Mustang/IMG_9402.jpg

http://i298.photobucket.com/albums/mm244/pchrods/Mustang/l_6dd3be0243fd4adcb14b2b5ae7af5519.jpg

http://i298.photobucket.com/albums/mm244/pchrods/Mustang/IMG_8718.jpg

[GHOSTDANCER]

:woot: What happened to the other pics from the first 2 pages ?