Drop spindles

[Autokraft]

Where is a good place to buy 2 or 3" drop spindles for a 69 Camaro?

Thanks for any help,

Kurt

[Derek69SS]

Not sure if the new ones from Fatman are out yet, but they look like they'll be a nice piece... like a tall spindle with 2" drop and none of the drawbacks with bumpsteer and turning radius.

Listed here (http://www.fatmanfab.com/06page24.htm) for $299.

[Autokraft]

Derek,

Thanks for the reply. I was going to check that place out tonite when I got a chance but looks like they have what I`m looking for.

Thanks alot,

Kurt

[Rybar]

ATS also has a nice aluminum dropped spindle. I think it's a 1.4" drop. Contact Tyler at: www.t56kit.com

[Autokraft]

Fatman is waiting for production to start so he does not have them ready yet.Ats looks like they only go 7/8 drop.

Any other ideas? Someone must make drop spindles for a 69 Camaro.


Any help would be great,

Thanks, Kurt

[XcYZ]

Kurt, Global West carries 2" drop spindles for 1st Gen F-body's:

www.globalwest.net (http://www.globalwest.net/)

[jannes_z-28]

There are a few drawbacks with dropspindles that you should be aware of:

http://www.pozziracing.com/first_gen_suspension_geome.htm#Drop%20Spindles


Jan

[Autokraft]

Scott,

I called Global West yesterday and who ever answered the phone told me they don`t offer drop spindles, just control arms.
Then, after calling about 25 different vendors I was looking at Global West`s website and saw they offer the 2"drop spindles. I called them back up again and the person on the phone told me they might be able to make some for me but the dude that I should talk to was out to lunch.
Not sure whats up with that but I`ll call back again and see what they have to say again.

Thanks Scott

Kurt

[MarkM66]

Are you wanting to run air bags or something?

You can lower your '69 with the correct, or cut springs just fine.