Streetk14
03-19-2008, 06:35 PM
I have some belt accessory drive parts for sale that I just removed from the LS1 in my '67 Camaro. These parts are all chrome plated and were purchased from Street & Performance (www.hotrodlane.cc). I removed these because I needed to change my tensioner style for use with my Magnuson blower. This kit worked great for my engine in n/a form, and I never had problems with the belt jumping or coming off.
I have the 140 amp alternator with brackets, power steering pump with brackets and remote-mount fluid tank, and belt tensioner with pullies and brackets. This is basiccaly their "tight Street rod" style bracket setup and is listed on the upper right on page 82 in their catalog.
My Kit s slightly different (tensioner in different location) since it's a few years old, but very similar to what is pictured in the catalog. I am not selling the A/C parts, but this setup will work with or without A/C.
Just so everyone knows, this system uses the stock water pump and crank pullies, and you need to use an F-body or GTO crank pulley for this system to work. The Vette pullies have different spacing and will not work. S&P does sell A/C brackets that will mount a Sanden compressor low on the passenger side to work with this setup.
The complete kit with A/C from S&P goes for $2369 in their catalog right now. The A/C kit by itself goes for about $750 (with chrome plated compressor), so that leaves the parts I'm selling with a retail of around $1600.
I'm asking $700 plus whatever the actual shipping costs end up being. This is a very nice looking and functional system, and I really didn't want to get rid of it. Let me know if you have any questions. I also have this listed for sale over at Pro-touring.com and may list it on ebay if it doesn't sell soon. Let me know if you have any questions. Thanks,
Andy
http://img217.imageshack.us/my.php?image=sppulliessb4.jpg
http://img217.imageshack.us/my.php?image=beltsetupbq7.jpg
I have the 140 amp alternator with brackets, power steering pump with brackets and remote-mount fluid tank, and belt tensioner with pullies and brackets. This is basiccaly their "tight Street rod" style bracket setup and is listed on the upper right on page 82 in their catalog.
My Kit s slightly different (tensioner in different location) since it's a few years old, but very similar to what is pictured in the catalog. I am not selling the A/C parts, but this setup will work with or without A/C.
Just so everyone knows, this system uses the stock water pump and crank pullies, and you need to use an F-body or GTO crank pulley for this system to work. The Vette pullies have different spacing and will not work. S&P does sell A/C brackets that will mount a Sanden compressor low on the passenger side to work with this setup.
The complete kit with A/C from S&P goes for $2369 in their catalog right now. The A/C kit by itself goes for about $750 (with chrome plated compressor), so that leaves the parts I'm selling with a retail of around $1600.
I'm asking $700 plus whatever the actual shipping costs end up being. This is a very nice looking and functional system, and I really didn't want to get rid of it. Let me know if you have any questions. I also have this listed for sale over at Pro-touring.com and may list it on ebay if it doesn't sell soon. Let me know if you have any questions. Thanks,
Andy
http://img217.imageshack.us/my.php?image=sppulliessb4.jpg
http://img217.imageshack.us/my.php?image=beltsetupbq7.jpg