Musclerodz
07-22-2005, 12:31 AM
I have got this tear it apart stuff down good! The Blazer is stripped of its innards and seperated from the frame. Frame and all suspension going out for sandblasting and powdercoat next week. Now if I can only figure out how to put it back together as quick I will be set.
When my buddy parked it, he mentioned it went down the road crooked. I notice a small dent in the front bumper when I removed it but thought nothing of it. It got me thinking so I measure to check if the frame was square. NOT!!!! Out of square by 1/2'!. If you don't know how these frame are put together, it has riveted crossmembers which sucks. As soon as its is square I will stitch weld all the crossmembers and brackets held together with rivets to prevent this problem in the future.
Mike
When my buddy parked it, he mentioned it went down the road crooked. I notice a small dent in the front bumper when I removed it but thought nothing of it. It got me thinking so I measure to check if the frame was square. NOT!!!! Out of square by 1/2'!. If you don't know how these frame are put together, it has riveted crossmembers which sucks. As soon as its is square I will stitch weld all the crossmembers and brackets held together with rivets to prevent this problem in the future.
Mike