JimM
02-09-2008, 05:06 AM
I figured I'd put an update thread in, we've been having some fun in electrical recently and perhaps the rest of the gang would have some interest.
My car is very much a driver, and 100% homebuilt. She comes down every winter for more improvements. This year, EFI and a 100 HP boost top the list. The entire top end of my 383 was removed and sold off, and replaced with a Lunati VooDoo Hydraulic roller cam and lifters, and AFR 195 heads with upgraded springs and titanium retainers. I scored a complete Holley C950 TBI system for a meesly 700 bones!
So, here's that so often empty engine bay:
http://home.comcast.net/~Jimragtop2/2008engine/2-9-08-1.jpg
One area I could really use some help and suggestions with is that eyesore of a factory wiper motor. I do need functional wipers, she spends enough time on the road that getting caught in the rain is a real possibility. I'd also like to keep the factory switch. If anyone has an idea for something that will fill that hole, make the wipers move, and use the factory switch, please post up?
http://home.comcast.net/~Jimragtop2/2008engine/2-9-08-2.jpg
Here's a few shot of the engine. She's a 383 stroker built in my original #'s matching 327 block, and I expect 450-500HP at the crank this year. I also expect her to take me anywhere and get me home, and to start, run, and idle as well as a stocker. A trip to yellowstone is on the agenda for July.
http://home.comcast.net/~Jimragtop2/2008engine/2-9-08-3.jpg
I wanted "something different" for an intake. I scored an old TM1 Tarantula on ebay, and sent it out to be Permastar coated. It looks pretty sharp, and hopefully will work well with the TBI and new heads and cam.
http://home.comcast.net/~Jimragtop2/clean/car10.jpg
This last pic is from last years Midwest Camaro Show in KC, and yes, I drove her there, and got caught in the rain once, too.
I'm looking for suggestions / comments on valve covers, too. I used to run repro Z/28 covers, but the baffles are too wide to clear the new pro magnum rockers! Those things were just to expensive to trash trying to fit a 10 lb bag in a 5 lb hole, so for now these ole M/T's are keeping the dust out. I do kinda like the "period" look of the M/T's, but any alternate suggestions are welcome.
My car is very much a driver, and 100% homebuilt. She comes down every winter for more improvements. This year, EFI and a 100 HP boost top the list. The entire top end of my 383 was removed and sold off, and replaced with a Lunati VooDoo Hydraulic roller cam and lifters, and AFR 195 heads with upgraded springs and titanium retainers. I scored a complete Holley C950 TBI system for a meesly 700 bones!
So, here's that so often empty engine bay:
http://home.comcast.net/~Jimragtop2/2008engine/2-9-08-1.jpg
One area I could really use some help and suggestions with is that eyesore of a factory wiper motor. I do need functional wipers, she spends enough time on the road that getting caught in the rain is a real possibility. I'd also like to keep the factory switch. If anyone has an idea for something that will fill that hole, make the wipers move, and use the factory switch, please post up?
http://home.comcast.net/~Jimragtop2/2008engine/2-9-08-2.jpg
Here's a few shot of the engine. She's a 383 stroker built in my original #'s matching 327 block, and I expect 450-500HP at the crank this year. I also expect her to take me anywhere and get me home, and to start, run, and idle as well as a stocker. A trip to yellowstone is on the agenda for July.
http://home.comcast.net/~Jimragtop2/2008engine/2-9-08-3.jpg
I wanted "something different" for an intake. I scored an old TM1 Tarantula on ebay, and sent it out to be Permastar coated. It looks pretty sharp, and hopefully will work well with the TBI and new heads and cam.
http://home.comcast.net/~Jimragtop2/clean/car10.jpg
This last pic is from last years Midwest Camaro Show in KC, and yes, I drove her there, and got caught in the rain once, too.
I'm looking for suggestions / comments on valve covers, too. I used to run repro Z/28 covers, but the baffles are too wide to clear the new pro magnum rockers! Those things were just to expensive to trash trying to fit a 10 lb bag in a 5 lb hole, so for now these ole M/T's are keeping the dust out. I do kinda like the "period" look of the M/T's, but any alternate suggestions are welcome.