Mercedes Forgeline ZX3p's. CHEAP!

[DriverzInc]

Anyone here have a Mercedes? I have had these in OVERSTOCK for sometime now, and need to move them. Never mounted, still in original packaging. 18x8 fronts, 32mm offset, 18x9 37mm offset. Will fit Mercedes E class, and others.
Call if questions.

MUST SELL ASAP. $2000/shipped US. Int'l customers pay freight.
Normal retail is over $4,000. I just want half that at 2K for the set.
Yes, I will ship them anywhere, even overseas, but buyer pays freight. These are also on ebay.

Mercedes is a 5x112 bolt pattern. I've had a few questions re: bolt circle on the wheels. Suppose someone could use a wheel adapter to make them fit other patterns: 5x4.5, 5x4.75, or whatever.

As the wheels are now, they are a 18x8 with a 5.75" backspace, and a 18x9 with a 6.5" backspace. So, if someone were to use 1" wheel adapters, to change the bolt pattern, these could work on a 1967-69 Camaro. Backspace would then be 4.75" front, and 5.5" rear.

Not a bad way to put some 18" Forgeline's on a First Gen camaro for CHEAP.


Here is a photo of them on a BMW. The wheels are finished exactly the same way, and these are also 18's:

http://www.forgeline.com/wheels/bmwe46-010.jpg

[Payton King]

I have a M3 convert they would look killer on.

[Steve1968LS2]

I have a M3 convert they would look killer on.

I thought you sold that?

Those would look killer on the M3... :yes:

[skatinjay27]

john has the post set up a lil confusing... according to the post they are for a mercedes, and the pic is just for reference... cause the pic is of a beamer.

[DriverzInc]

Sorry for any confusion, I made some changes to the original post, so hopefully it is a little more clear.

Also, mercedes is a 5x112 bolt pattern. I've had a few questions re: bolt circle on the wheels. Suppose someone could use a wheel adapter to make them fit other patterns: 5x4.5, 5x4.75, or whatever.

As the wheels are now, they are a 18x8 with a 5.75" backspace, and a 18x9 with a 6.5" backspace. So, if someone were to use 1" wheel adapters, to change the bolt pattern, these could work on a 1967-69 Camaro. Backspace would then be 4.75" front, and 5.5" rear.

Not a bad way to put some 18" Forgeline's on a First Gen camaro for CHEAP.

Hmmm....

[Perry Mitchell]

I am thinking about it. I have to check out what the stock width of the AMG wheels that are on it now are because I would want to go larger, not smaller. They should fit a 2004 CLK 500, right?

[DriverzInc]

I am thinking about it. I have to check out what the stock width of the AMG wheels that are on it now are because I would want to go larger, not smaller. They should fit a 2004 CLK 500, right?

Yes, they will fit. I'm very motivated to move these, so let's work something out. 951-609-3483.

[DriverzInc]

Perry,
Trying to send you PM, box is full.

Wheels are still available.....

[DriverzInc]

SOLD! You'll love these wheels Perry, thanks again!

[uthustler]

I have an E55, can you photoshop them on my car, id like to see how they look.

http://www.fototime.com/%7BDADA75EB-8D43-45F7-A524-EC062B9CFEF9%7D/picture.JPG