what lsx engine harness are you using?

[radrambler]

guys

im looking to find out who is using what for lsx engine harness
if your using a factory harness thats modified ..if so by who ..cost? satisfied?
if your using a out of the box harness ..what brand and are you happy with it.....
im in the market for a engine harness....i would like you input if you have purchased one or more .....and are happy with it or not

thanks guys
radrambler

[Rybar]

John at www.speartech.com I am very happy with his work, prices and tech help.

[jeff hanson]

John at www.speartech.com I am very happy with his work, prices and tech help.
second that:thumbsup:

[Steve1968LS2]

John at www.speartech.com I am very happy with his work, prices and tech help.

I will third that..

I've used John for three projects now and the products/service are second to none.

And you will find this to be a common opinion of Speartech. :thumbsup:

[Tim Baillie]

Street & Performance is what we are using in the 69 Camaro.

[Bowtieracing]

John at www.speartech.com I am very happy with his work, prices and tech help.

I "fourth" to that ;) I have had two of Johns harneses and just looked at the pictures of new gm "hot rod" harness and it looked more complex to me compared speartechs.

I plan dealing with John at future too :cool:

[Teetoe_Jones]

I also have used Speartech with great results on factory stuff. For full aftermarket I use the MEFI 4 and soon to be MEFI 5 from MSD. Great systems, come with the wiring harness, computer, and tuning software for about $1850.00. Will run LS1/LS2/LS6 and LS7 engines as well as RamJet crate engines.

Tyler

[XcYZ]

I will give a fifth vote for Speartech. :thumbsup: Very nice guy, really knows his stuff, and a pleasure to work with.

[TA219]

I will give a fifth vote for Speartech. :thumbsup: Very nice guy, really knows his stuff, and a pleasure to work with.

#6 HERE :thumbsup:

I was very worried about wiring, but his harness made it very easy and thanks to the length of the wire my PCM is hidden inside the car keeping the engine bay nice and clean :)

[Steve1968LS2]

#6 HERE :thumbsup:

I was very worried about wiring, but his harness made it very easy and thanks to the length of the wire my PCM is hidden inside the car keeping the engine bay nice and clean :)

Wiring my LS2 was the easiest part of my build. lol

[Datsbad]

Speartech for us to on all or builds.
Great guy to work with

[radrambler]

guys

thanks for the input.....

radrambler

[cam]

I did my own harness. Its pretty easy surprisingly enough. THe conversion/hybrids swap sticky over at LS1tech has lots of good info on it.

If your not into doing it yourself then I too vote for plug and play ease Speartech is the way to go.

[surreyboy]

speartech did my ls1 harness for my 91 camaro, its a direct fit. excellent work