For Sale-billet Hood Pin Plates

[TEDDYS CAMARO]

I Have 2 Pairs Of Billet Hood Pin Plates I Bought From Syborg Tt(marty) That I Am Not Going To Use. $80.00 Per Pair.

[coolwelder62]

any photos

[TEDDYS CAMARO]

Here You Go

[coolwelder62]

Ted I will take the pin plates if I can buy 1 pr. PM me with your phone # I will call you to get details Will send money thrus. Thanks Scott

[TEDDYS CAMARO]

Pm Sent.

[DRJDVM's '69]

No pins? If you have some pins I might be interested.

[Steve1968LS2]

No pins? If you have some pins I might be interested.

The pins are AFCO units and very inexpensive.. you can get them on Summit for CHEAP (like $15..)

Part number 10190

I just put the scuff plates on the Fairlane and they look GREAT!!

[TEDDYS CAMARO]

THANK YOU STEVE.:thumbsup:

[TEDDYS CAMARO]

I still have one pair left if anybody is intrssted/

[Kris Horton]

Are these the same basic dimensions as normal plates? I already have standard plates on my hood and would hate to have to re-drill holes, but would really like to run these.

[TEDDYS CAMARO]

I Am Pretty Sure. We Need To Ask Marty. I'll Find Out.

[syborg tt]

They are based off the afco hood pin kit.

e-mail me your addy and i'll send you a template

[email protected]

[syborg tt]

e-mail sent to Kris

[TEDDYS CAMARO]

THANK YOU MARTY!!:bow: :thumbsup:

[Orng Crsh]

Teddy, I'll buy the second set if it's still available.

[formula98]

Are these the same basic dimensions as normal plates? I already have standard plates on my hood and would hate to have to re-drill holes, but would really like to run these.

Hi Kris, The hole pattern is the same as the AFCO scuff plate and I would assume, but have not checked it out. They would be the same as Mr. Gasket and others. The hole pattern is 1.5 x 1.5 and we use #8-32 screws. I have a generic set of hood pins and they have a smaller hole pattern (1.25 x 1.25). I hope this helps.

We will be offering a Black Anodized version in the next few weeks also.

Hey, your new site looks great!

[TEDDYS CAMARO]

SOLD! THE BILLET PLATES ARE AWESOME. I WILL EVENTUALLI BE BUYING SOME FOR MY NEXT PROJECT, PROBABLY THE LOCKING ONES.:lateral:

[formula98]

SOLD! THE BILLET PLATES ARE AWESOME. I WILL EVENTUALLI BE BUYING SOME FOR MY NEXT PROJECT, PROBABLY THE LOCKING ONES.:lateral:

Thanks Teddy, I'm glad you like them! For the next two weeks I will be offering the members here $15 off the standard price. If you are interested PM me and I'll explain what you need to do. Also I'm going to be releasing a Black Hard coated Part in the next two weeks. They are for the next two weeks selling for $125 plus $10 S&H. after the two weeks the price will be going to $150 plus $10 S&H.

Here is what they will look like

http://farm3.static.flickr.com/2016/2264577104_ccbc726efe.jpg

Thanks again Teddy,

[z28racerpaul]

I still have one pair left if anybody is intrssted/
Do you still have a pair available?

[formula98]

We do! We have stock of both the locking and original. We will have stock of the black one in 5 ~ 10 days as they are out being hard coated.

Visit www.hoodpins.net if you mention Lateral-G I'll refund $15 off the original or locking and will take $25 off the New Black pins. This is good till March 1st.
For members only!


Thank you