Post your Wilwood brakes!

[Vegas69]

Have an order in with Frank for my Wilwoods and have a little time to change my mind. Right now I am going with the 13" rotor up front and 6 piston caliper and 12.2 and 4 piston in the back black.
I am kicking around the larger rear caliper and red powder coat still. Let's see them brakes! Especially a black car with red calipers!

[Spiffav8]

Have an order in with Frank for my Wilwoods and have a little time to change my mind. Right now I am going with the 13" rotor up front and 6 piston caliper and 12.2 and 4 piston in the back black.
I am kicking around the larger rear caliper and red powder coat still. Let's see them brakes! Especially a black car with red calipers!


I say go big out back just for the cool factor. The red would scream on your car! Which by the way I have started calling "Blackout". :thumbsup:

[Vegas69]

Can I borrow a few bucks?:lol: I agree with you about the bigger calipers out back. Try to save a few bucks here and there but that doesn't seem to be happening. :D

[Vegas69]

Double post

[GeoffP]

No pics from me unfortunately. I too have a kit on order from Frank and crew. 12.19" all around for me with 6 piston on the front. 13" front was too rich for my blood. Anything is going to be a HUGE improvement over the 4 wheel drum system however. Looking forward to pictures of installed systems...

GeoffP
68 Camaro LT1 T56

[Twin_Turbo]

http://i8.tinypic.com/6u4ac9j.jpg

[Payton King]

13 inch rotors front and rear. The rear caliper, although only 4 piston, is the same physical size as the front 6 piston. Rim size is 18 front 19 rear.

[sunset68]

Here's an orange car with black brakes.....



http://i99.photobucket.com/albums/l288/sunset68camaro/Newbrakes.jpg

http://i99.photobucket.com/albums/l288/sunset68camaro/Newstance.jpg

http://i99.photobucket.com/albums/l288/sunset68camaro/Wilwood6.jpg

http://i99.photobucket.com/albums/l288/sunset68camaro/Wilwood7.jpg

[ZZ3ElCamino]

Ordered mine from Frank, one of the better purchases I have made!

http://i181.photobucket.com/albums/x101/zz3elcamino/El%20Camino/IMG_0832.jpg

http://i181.photobucket.com/albums/x101/zz3elcamino/El%20Camino/IMG_0833.jpg

http://i181.photobucket.com/albums/x101/zz3elcamino/El%20Camino/IMG_0655.jpg

[Vegas69]

Thanks for the photos everybody. As much as I like the Red Calipers I think it's to much bling for my theme. Frank has wrestled another 1200 bucks out of my wallet.:unibrow: Going to run 13' rotors front and back, 6 piston, large 4 piston rear, cross drilled and slotted, in black powder coat. :thumbsup:

[Spiffav8]

Frank has wrestled another 1200 bucks out of my wallet.:unibrow:

He's a big guy, I can see how that could happen. :D

[Bad94]

I will get a few pics of the front kit i just put on a 69 stang, super easy, by far the best front disc kit i have ever put on a car.


Got me wanting to sell my C5 stuff.

[RodZ]

Scott Whidby's 69

http://i160.photobucket.com/albums/t186/hotrodr1/PICT2805.jpg
http://i160.photobucket.com/albums/t186/hotrodr1/PICT2733.jpg
http://www.interiorsbyshannon.com/scott_whidby_1969_camaro_shockwaves.JPG

[Bad94]

http://s-seriesforum.com/albums/album420/1_21_002.sized.jpg
http://s-seriesforum.com/albums/album420/1_21_003.sized.jpg
Thats behind a 15" wheel

[Vegas69]

Scott Whidby's 69

http://i160.photobucket.com/albums/t186/hotrodr1/PICT2805.jpg
http://i160.photobucket.com/albums/t186/hotrodr1/PICT2733.jpg
http://www.interiorsbyshannon.com/scott_whidby_1969_camaro_shockwaves.JPG
Thanks for posting my setup.

[HRBS]

12.19" Dynalites on our customers 69 Mustang:

http://i241.photobucket.com/albums/ff143/hrbs/mustang/IMG_0174.jpg

[Bad94]

12.19" Dynalites on our customers 69 Mustang:

http://i241.photobucket.com/albums/ff143/hrbs/mustang/IMG_0174.jpg

What wheel size is that stang on? 17/18? what size tho?

[HRBS]

What wheel size is that stang on? 17/18? what size tho?
17x7 front, 18x8 rear

[syborg tt]

Okay here is how my project started.

12" in the rear

http://www.syborgtwinturbo.com/albums/Build/2005_05_16_10.jpg

New Rear - 14"

http://www.syborgtwinturbo.com/albums/Build/2006_11_04_011.jpg

11" in the front

http://www.syborgtwinturbo.com/albums/Build/2005_05_20_01.jpg

New Front - 14"

Built by www.revolutionbrake.com ask for Kevin

http://www.syborgtwinturbo.com/albums/Build/2005_10_27_028.sized.jpg

http://www.syborgtwinturbo.com/albums/Build/2005_12_26_014.jpg

[pitstain]

Sorry for how dirty the brakes are, you guys are much better about cleaning calipers than I am apparently....:)

Front 16" w/ TC6 calipers.

http://www.lightningmod.com/images/brakes/frontbrakes.jpg

Rear 15" w/ BSL4R calipers.

http://www.lightningmod.com/images/brakes/rearbrakes.jpg


Ian

[skatinjay27]

holy **** ian!!!! can we see some more pics of that truck!!!!!

[eville]

12" 4 piston with an 18" wheel.

http://i34.photobucket.com/albums/d143/sej275/Forgelines/IMG_1135.jpg

[Twin_Turbo]

oops. i already replied here...never mind

BTW, german company MovIt has converrsion kits for many brembo calipers (even the ceramic 8 pot stuff) for many cars, including C4, 5 and 6 corvettes. Not cheap tho.

[pitstain]

holy **** ian!!!! can we see some more pics of that truck!!!!!

:)

http://www.lightningmod.com/images/glen11.jpg

http://www.lightningmod.com/images/seneca1.JPG

http://www.lightningmod.com/images/seneca2.JPG

[4mm]

Wilwood C5 13" on AFX spindles.

http://i29.tinypic.com/1z56cfd.jpg

[67ragtp]

Thought you might like to see the wilwood superlites(black calipers 6piston/4piston) in 13" front and back with 17" budnik fontanas. Frank(prodigy) hooked me up and it all went together pretty smooth.

http://i274.photobucket.com/albums/jj262/67ragtp/Picture004.jpg

http://i274.photobucket.com/albums/jj262/67ragtp/Picture002-1.jpg

http://i274.photobucket.com/albums/jj262/67ragtp/Picture001.jpg

Rich

[gmjj13]

here's mine:D

http://i98.photobucket.com/albums/l271/choppin53/DSC00994.jpg