"THE GMR"
12-23-2007, 06:08 PM
These are similar to the other tube clamps, but the design has been taken a bit further.
http://www.gmachineracing.com/sitebuilder/images/weld_003-345x253.jpg
It has one side that welds into the tube then the other side is notched to fit the cagework. The Ultimate in Strangth and Stealth.
each set is $87 and comes with everything shown. Enough for one removable bar.
http://www.gmachineracing.com/images/weld_004.jpg
sizes include,
1.75" by .120 and .095 wall
1.5" by .120 and .095 wall.
thanks,
Jason
http://www.gmachineracing.com/sitebuilder/images/weld_003-345x253.jpg
It has one side that welds into the tube then the other side is notched to fit the cagework. The Ultimate in Strangth and Stealth.
each set is $87 and comes with everything shown. Enough for one removable bar.
http://www.gmachineracing.com/images/weld_004.jpg
sizes include,
1.75" by .120 and .095 wall
1.5" by .120 and .095 wall.
thanks,
Jason